LBA127L Dual Single-Pole, Combination OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 250 150 15 Units VP mArms / mADC Features * Current Limited 1-Form-A Relay * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount, Tape & Reel Version Available Description LBA127L comprises two independent solid state relays (one current-limited, single-pole, normally open (1-Form-A) relay and one single-pole, normally closed (1-Form-B) relay), in an 8-pin package that employs optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The optically coupled relay outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. LBA127L is designed to provide an ideal solution where a complementary Form-A/Form-B relay pair is required in a space-saving single package. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # LBA127L LBA127LS LBA127LSTR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) Pin Configuration + Control - Normally Closed - Control - Normally Closed + Control - Normally Open - Control - Normally Open 1 8 2 7 3 6 4 5 Switching Characteristics of Normally Open (Form A) Devices Form-A Switching Characteristics of Normally Closed (Form B) Devices IF ILOAD 90% ILOAD ton DS-LBA127L-R08 Normally Open Pole Form-B IF Pb Normally Closed Pole 90% 10% 10% toff toff ton e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LBA127L Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings 250 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms C C Derate linearly 1.33 mW / C Derate linearly 6.67 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak (Form-B Only) Load Current Limiting (Form-A Only) On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units t = 10ms IF=5mA, VL=8V IL=150mA VL=250VP IL ILPK ICL RON ILEAK 190 - 200 6.8 - 150 400 280 15 1 mArms / mADC mAP mA VL=50V, f=1MHz ton toff COUT - 110 5 5 - IL=150mA IF=5mA VR=5V IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V 1 If both poles operate, then the load current must be derated so as not to exceed the package power dissipation value. 2 Measurement taken within 1 second of on-time. www.ixysic.com A ms pF R08 INTEGRATED CIRCUITS DIVISION LBA127L Form-A/Form-B PERFORMANCE DATA @25C (Unless Otherwise Noted)* 25 20 15 10 5 25 20 20 15 10 5 0 0 1.18 1.20 1.22 1.24 15 10 5 0 0.35 1.26 0.40 0.45 0.50 0.55 0.60 332 334 336 338 340 342 LED Forward Voltage Drop (V) LED Current (mA) Blocking Voltage (VP) Typical LED Forward Voltage Drop vs. Temperature Typical IF for Switch Operation vs. Temperature (IL=75mADC) Load Current vs. Load Temperature (Form-A: IF=5mA, Form-B: IF=0mA) 0.65 1.6 IF=50mA IF=20mA IF=10mA 1.5 1.4 LED Current (mA) LED Forward Voltage Drop (V) 25 Device Count (N) Device Count (N) Device Count (N) 30 1.3 1.2 IF=5mA 1.1 1.0 -40 -20 0 20 40 60 Temperature (C) 80 0.60 0.55 0.50 0.45 0.40 -40 100 250 Load Current (mA) 35 Typical Blocking Voltage Distribution (Form-A: IF=0mA, Form-B: IF=5mA) (N=50) Typical IF for Switch Operation (N=50, IL=150mADC) Typical LED Forward Voltage Drop (N=50, IF=5mA) 355 200 150 100 50 0 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) 80 100 Typical Blocking Voltage vs. Temperature (Form-A: IF=0mA, Form-B: IF=5mA) Blocking Voltage (VP) 350 345 340 335 330 325 320 315 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R08 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LBA127L Form-A RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-A Typical Turn-On Time (N=50, IF=5mA, IL=150mADC) 25 15 10 5 0 20 15 10 5 0.33 0.36 0.39 0.42 0.45 0.12 0.13 Turn-On Time (ms) Form-A Typical Turn-On Time vs. LED Forward Current (IL=75mADC) 1.00 20 15 10 5 0 0 0.30 Form-A Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mADC) 25 Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-A Typical Turn-Off Time (N=50, IF=5mA, IL=150mADC) 0.14 0.15 0.16 Turn-Off Time (ms) 6.70 0.17 6.80 6.85 6.90 6.95 On-Resistance (:) Form-A Typical Turn-Off Time vs. LED Forward Current (IL=75mADC) 0.165 6.75 Form-A Typical On-Resistance vs. Temperature (IF=5mA, IL=75mADC) 8.5 0.50 0.25 0.160 0.155 7.5 7.0 6.5 6.0 5.5 5.0 -40 0.150 0 0 10 20 30 40 LED Forward Current (mA) 50 0 Form-A Typical Turn-On Time vs. Temperature (IF=5mA, IL=75mADC) 1.2 10 20 30 40 LED Forward Current (mA) 50 Form-A Typical Turn-Off Time vs. Temperature (IF=5mA, IL=75mADC) 0.20 1.0 0.20 0.6 0.4 0.2 0 -40 -20 0 20 40 60 Temperature (C) 80 100 Load Current (A) 0.8 0.16 0.14 0.12 0.10 0.08 -40 0 20 40 60 Temperature (C) 80 100 Form-A Typical Load Current vs. Load Voltage (IF=5mA) 0.10 0.05 0.00 -0.05 -0.10 -0.15 -20 0 20 40 60 Temperature (C) Form-A Typical Leakage vs.Temperature (Measured Across Pins 5 & 6) (VL=250V) 0.025 -20 0.15 0.18 Turn-Off Time (ms) Turn-On Time (ms) On-Resistance (:) Turn-Off Time (ms) Turn-On Time (ms) 8.0 0.75 80 100 -0.20 -1.5 -1.0 -0.5 0.0 0.5 Load Voltage (V) 1.0 1.5 Form-A Typical Current Limiting vs. Temperature (IF=5mA) 400 350 300 Current (mA) Leakage (PA) 0.020 0.015 0.010 250 200 150 100 0.005 50 0.000 -40 -20 0 20 40 60 Temperature (C) 80 100 0 -40 -20 0 20 40 60 80 100 120 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R08 INTEGRATED CIRCUITS DIVISION LBA127L Form-B RELAY PERFORMANCE DATA @25C (Unless Otherwise Noted)* Form-B Typical Turn-On Time (N=50, IF=5mA, IL=150mADC) 25 15 10 5 0 20 15 10 5 20 15 10 5 0 0.03 78.5 0.05 0.07 0.09 0.11 Form-B Typical On-Resistance Distribution (N=50, IF=0mA, IL=150mADC) 25 Device Count (N) 20 Device Count (N) Device Count (N) 25 Form-B Typical Turn-Off Time (N=50, IF=5mA, IL=150mADC) 0 0.13 0.75 1.25 1.75 2.25 2.75 3.25 4.05 4.35 4.65 4.95 5.25 5.55 Turn-On Time (ms) Turn-Off Time (ms) On-Resistance (:) Form-B Typical Turn-On Time vs. LED Forward Current (IL=75mADC) Form-B Typical Turn-Off Time vs. LED Forward Current (IL=75mADC) Form-B Typical On-Resistance vs. Temperature (IF=0mA, IL=75mADC) 2.5 9 77.5 77.0 76.5 2.0 7 On-Resistance (:) Turn-Off Time (ms) Turn-On Time (Ps) 8 78.0 1.5 1.0 0.5 6 5 4 3 2 1 76.0 0 5 0.20 10 15 20 25 30 35 40 45 0 50 5 10 20 25 30 35 40 45 0 20 40 60 80 100 Temperature (C) Form-B Typical Turn-On Time vs. Temperature (IF=5mA, IL=75mADC) Form-B Typical Turn-Off Time vs. Temperature (IL=75mADC) Form-B Typical Load Current vs. Load Voltage (IF=0mA) 3.5 Turn-Off Time (ms) 0.10 0.05 200 IF=5mA 150 IF=10mA 2.5 IF=20mA 2.0 1.5 1.0 0.5 -20 -20 LED Forward Current (mA) 0.15 0 -40 0 -40 50 LED Forward Current (mA) 3.0 Turn-On Time (ms) 15 Load Current (mA) 0 0 20 40 60 80 100 0 -40 -20 0 20 40 Typical Leakage vs. Temperature Measured Across Pins 7&8 (IF=5mA) -100 60 80 100 -200 -1 -0.8 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 0.8 1 Load Voltage (V) Energy Rating Curve 1.2 1.0 Load Current (A) Leakage (PA) 0 -50 Temperature (C) 0.05 0.04 0.03 0.02 0.8 0.6 0.4 0.2 0.01 0 -40 50 -150 Temperature (C) 0.06 100 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R08 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LBA127L Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LBA127L / LBA127LS MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LBA127L / LBA127LS 250C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb 6 e3 www.ixysic.com R08 INTEGRATED CIRCUITS DIVISION LBA127L MECHANICAL DIMENSIONS LBA127L 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 3.302 0.051 (0.130 0.002) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 0.0127 (0.010 0.0005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) LBA127LS 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) R08 www.ixysic.com 7 INTEGRATED CIRCUITS DIVISION LBA127L MECHANICAL DIMENSIONS LBA127LSTR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 8 Specification: DS-LBA127L-R08 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012