Features.
lField Programmable Input and Output Ranges.
lBi-Polar Input and Output Ranges.
lInput to Output Isolation 1.6kV.
lHigh Accuracy 0.1%.
lUniversal AC\DC Power Supply.
lTransmitter Power Supply Standard.
lCompact DIN Rail Mount Enclosure.
lAvailable Standard or Special Calibration.
Ordering Information.
PI-D-X Standard Calibration: Input 4~20mA; Output 4~20mA;
Standard Universal Power Supply.
PI-D - - - - Special Range Special Range Calibration.
IR OR PS
Programmable Isolating DC Voltage or
DC Current Input to DC Current or
DC Voltage Output Transmitter.
Quality Assurance Programme.
The modern technology and strict procedures of the ISO9001 Quality Assurance Programme applied
during design, development, production and final inspection grant long term reliability of the instrument.
Ordering Examples.
1/ PI-D-K-1-L 0~10V Input; 0~1mA Output; Low Voltage Universal Power Supply.
2/ PI-D-Z-P-S-0/8V 0~8V Input; -10~10V Output; Standard Universal Power Supply.
PI-D Programmable
Isolating DC Transmitter.
ISO9001
Other PI- models include:
PI-B Bridge \ Straingauge;
PI-F Frequency;
PI-K Resistance;
PI-M Maths Computing;
PI-N RTD Differential Pt100;
PI-P Potentiometer;
PI-R RTD Pt100;
PI-S Dual Setpoint Controller;
PI-T Thermocouple.
1.03
SEGNARTUPNI SEGNARTUPTUO
egatloV RI tnerruC RI egatloV RO tnerruC RO
Vm01~0A Aµ002~01Vm005~0AAm1~01
Vm02~0 B Aµ005~0 2 V1~0 B Am2~0 2
Vm05~0 C Am1~0 3 V2~0 C Am5~0 3
Vm001~0 D Am2~0 4 V3~0 D Am01~0 4
Vm002~0 E Am5~0 5 V4~0 E Am61~0 5
Vm005~0 F Am01~0 6 V5~0 F Am02~0 6
V1~0G Am02~07V6~0G Am5~17
V2~0 H Am05~0 8 V8~0 H Am01~2 8
V4~0I Am001~09V01~0IAm02~49
V5~0 J Am5~1 01 V21~0 J Am1~1- 01
V01~0K Am01~211 V5~1K Am2~2-11
V02~0 L Am02~4 21 V01~2 L Am5~5- 21
V05~0M Am05~0131 V1~1-M Am01~01-31
V001~0 N Am1~1- 41 V2~2- N Am02~02- 41
V051~0O Am01~01-51 V5~5-O
V2~1 P Am02~02- 61 V01~01- P
V5~1Q *Am4~0271 V21~21-Q
V01~2 R *Am01~05 81
V1~1-S
V5~5- T
V01~01-U
egnaRtupnIlaicepS Z egnaRtuptuOlaicepS Z
.desreversnoitcennocriehtfoytiralopehtevahtsummehtediseb'*'htiwsegnaR YLPPUSREWOP SP
CDV083~02dnaCAV072~42:ylppuSrewoPlasrevinUdradnatS S
CDV03~8dnaCAV03~8:ylppuSrewoPegatloVwoL L
2 1 8 7
3 4 5 6
40mm
50mm
80mm
8.4mm
2 x 04.5mm
8PFA Octal Termination Base
Dimensions and Mounting. 80mm
Side View
120mm
Top View
51mm
84mm
80mm
100mm
Top View
58mm
Minimum distance
between units.
PI-D Specifications.
Input -Voltage Field Programmable From 10mV to 150Vdc and Bipolar.
Minimum Input Resistance = 200kΩ.
Maximum Over-range = 10Vdc Continuous.
- Current Field Programmable From 200µA to 100mAdc and Bipolar.
Input Resistance = 25Ω.
Maximum Over-range = 120mAdc Continuous.
-Transmitter P\S 20Vdc± 5% Common to Input Com. (Terminal 4.)
Max Load = 30mA.
Ripple < 20mVpp Typical at 30mA Load.
Output -Voltage Field Programmable From 500mV to ±12Vdc.
Maximum Output Drive = 10mA.
-Current Field Programmable From 1mA to ±20mAdc.
Maximum Output Drive = 10Vdc. (500Ω
@ 20mA.)
Universal P\S -Standard 20~380Vdc and 24~270Vac,;50\60Hz; 4VA (32Vac Min. if Tx. P\S used.)
-Low Voltage 8~30Vdc and 8~30Vac; 50\60Hz; 4VA.
-
Circuit Sensitivity
<±0.001%/V FSO Typical.
Accurate to <±0.1% FSO Typical.
Linearity & Repeatability <±0.1% FSO Typical.
Ambient Drift <±0.01%/C FSO Typical.
Noise Immunity 125dB CMRR Average. (1.6kVac RMS Limit.)
R.F. Immunity <1% Effect FSO Typical.
Isolation Voltage 1600Vac\dc Input to Output for 60sec.
Response Time 200msec Typical. (From 10 to 90% 50msec Typical.)
Operating Temperature 0~50C.
Storage Temperature -20~80C.
Operating Humidity 90%RH max. Non-Condensing.
Construction Socket Plug-In Type with Barrier Terminals.
Note 1. Specifications based on Standard Calibration Unit, unless otherwise specified.
Note 2. Due to ongoing research and development, designs, specifications, and documentation are subject to change without notification.
No liability will be accepted for errors, omissions or amendments to this specification.
Note 3. Further ranging and installation information supplied with each unit, and is available upon request.
Eg. Pressure
Transducer with
Voltage Output.
Eg. Pressure
Transducer with
Current Output.
+
−
−
+
3
4
5
6
+ V
COM
+ I
Tx.
P\S
+20V
Power
Supply
Input
2
1
8
7
COM
Sig
P/S
Eg. 3 Wire
Transmitter with
Voltage or
Current Output.
Examples of Input Connection.
3
4
5
6
+ V
COM
+ I
Tx.
P\S
+20V
PI-D Input
or
3
4
5
6
+ V
COM
+ I
Tx.
P\S
+20V
PI-D Input
−
+
Output
Terminations.
Output 1 +Ve
2 -Ve
Input 3 + V
4 COM
5+ I
6 Tx. P\S 20V
P\S 7 ~AC\+DC
8 ~AC\-DC
−
+
∼
−
∼
+
OR
Eg. 2 Wire Loop
Powered
4~20mA
Transmitter.
PI-D
1600V Isolation
Barrier
AC\DC Power
Source.
-
+
Eg. Indicator, 2100-M,
etc. With Voltage or
Current Input.
~
~
-
+
1.04
pi-d_2pg.p65
ISSUE 020798
Phone: (914) 361-2800 (800) 49-VESPO
Fax: (914) 361-2818 (800) 36-VESPO
W ebsite:www .vespo.com E-mail: controls@vespo.com
