Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
< 08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L✽
✽ L < 16 : L±1.0
L > 20 : L±2.0
Pressure relief
06.3 <+
–
010<
0D±0.5
fd±0.05
● Endurance : 105 °C 1000 h to 2000 h
● RoHS compliant
Features
Radial Lead Type
Series : NHG Type : A
Category temperature range
–55 °C to +105 °C –25 °C to +105 °C
Rated voltage range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Capacitance range 2.2 µF to 22000 µF 2.2 µF to 330 µF
Capacitance tolerance ±20 % (120 Hz/+20 °C)
Leakage current I < 0.01 CV or 3 (µA) After 2 minutes
(Which is greater) I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the
capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Capacitance change Within ±20 % of the initial value
tan d< 200 % of the initial limit
DC leakage current Within the initial limit
Shelf life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Rated voltage
(V.DC)
Capacitance
(µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
2.2 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
160 to 450 2.2 to 330 0.80 1.00 1.35 1.50 1.50
0D56.381012.51618
0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Speci cations
Frequency correction factor for ripple current
Dimensions
(Unit : mm)
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Endurance
(hours)
Lead
dia.
0d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
✽B
Taping
✽i
6.3
220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 ECA0JHG221( ) 200 2000
470 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 ECA0JHG471( ) 200 2000
1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 ECA0JHG102( ) 200 1000
2200 10 16 710 0.30 2000 0.6 5.0 5.0 ECA0JHG222( ) 200 500
3300 10 20 840 0.32 2000 0.6 5.0 5.0 ECA0JHG332( ) 200 500
4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 ECA0JHG472( ) 200 500
6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 ECA0JHG682( ) 200 500
10000 16 25 1650 0.46 2000 0.8 7.5 7.5 ECA0JHG103( ) 100 250
15000 16 31.5 2010 0.56 2000 0.8 7.5 ECA0JHG153 100
22000 18 35.5 2350 0.70 2000 0.8 7.5 ECA0JHG223 50
10
330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 ECA1AHG331( ) 200 2000
470 8 11.5 250 0.24 1000 0.6 3.5 5.0 ECA1AHG471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 ECA1AHG102( ) 200 500
2200 10 20 760 0.26 2000 0.6 5.0 5.0 ECA1AHG222( ) 200 500
3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 ECA1AHG332( ) 200 500
4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 ECA1AHG472( ) 200 500
6800 16 25 1570 0.34 2000 0.8 7.5 7.5 ECA1AHG682( ) 100 250
10000 16 31.5 1890 0.42 2000 0.8 7.5 ECA1AHG103 100
15000 18 35.5 2180 0.52 2000 0.8 7.5 ECA1AHG153 50
16
10 0 5 11 110 0. 20 10 0 0 0. 5 2.0 5. 0 2.5 ECA1CHG101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 ECA1CHG221( ) 200 2000
330 8 11.5 260 0.20 1000 0.6 3.5 5.0 ECA1CHG331( ) 200 1000
470 8 11.5 310 0.20 1000 0.6 3.5 5.0 ECA1CHG471( ) 200 1000
1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500
2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 ECA1CHG222( ) 200 500
3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 ECA1CHG332( ) 200 500
4700 16 25 1480 0.26 2000 0.8 7.5 7.5 ECA1CHG472( ) 100 250
6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100
10000 18 35.5 2060 0.38 2000 0.8 7.5 ECA1CHG103 50
25
47 5 11 91 0.16 1000 0.5 2.0 5.0 2.5 ECA1EHG470( ) 200 2000
100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 ECA1EHG101( ) 200 2000
220 8 11.5 230 0.16 1000 0.6 3.5 5.0 ECA1EHG221( ) 200 1000
330 8 11.5 310 0.16 1000 0.6 3.5 5.0 ECA1EHG331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 ECA1EHG471( ) 200 500
1000 10 20 680 0.16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500
2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 ECA1EHG222( ) 200 500
3300 16 25 1400 0.20 2000 0.8 7.5 7.5 ECA1EHG332( ) 100 250
4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100
6800 18 35.5 2040 0.26 2000 0.8 7.5 ECA1EHG682 50
35
47 5 11 90 0.14 1000 0.5 2.0 5.0 2.5 ECA1VHG470( ) 200 2000
100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 ECA1VHG101( ) 200 2000
220 8 11.5 270 0.14 1000 0.6 3.5 5.0 ECA1VHG221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 ECA1VHG331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 ECA1VHG471( ) 200 500
1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 ECA1VHG102( ) 200 500
2200 16 25 1260 0.16 2000 0.8 7.5 7.5 ECA1VHG222( ) 100 250
3300 16 31.5 1610 0.18 2000 0.8 7.5 ECA1VHG332 100
4700 18 35.5 1910 0.20 2000 0.8 7.5 ECA1VHG472 50
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Endurance
(hours)
Lead
dia.
0d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
✽B
Taping
✽i
50
2.2
5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000
3.3
5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000
4.7
5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000
10
5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000
22
5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000
33
5 11 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000
47
6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000
100
8 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000
220
10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500
330
10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500
470
10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500
1000
12.5 25 950 0.12 2000 0.6 5.0 5.0 ECA1HHG102( ) 200 500
2200
16 31.5 1470 0.14 2000 0.8 7.5 ECA1HHG222 100
3300
18 35.5 1770 0.16 2000 0.8 7.5 ECA1HHG332 50
63
10
5 11 46 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG100( ) 200 2000
22
5 11 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000
33
6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000
47
6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG470( ) 200 2000
100
10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500
220
10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500
330
10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500
470
12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500
1000
16 25 930 0.10 2000 0.8 7.5 7.5 ECA1JHG102( ) 100 250
2200
18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50
100
2.2
5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000
3.3
5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000
4.7
5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000
10
6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000
22
6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000
33
8 11.5 130 0.08 1000 0.6 3.5 5.0 ECA2AHG330( ) 200 1000
47
10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500
100
10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500
220
12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500
330
16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250
470
16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250
1000
18 35.5 985 0.08 2000 0.8 7.5 ECA2AHG102 50
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Endurance
(hours)
Lead
dia.
0d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
✽B
Taping
✽i
160
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG3R3( ) 200 2000
4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG4R7( ) 200 2000
10 10 12.5 70 0.15 2000 0.6 5.0 5.0 ECA2CHG100( ) 200 500
22 10 20 130 0.15 2000 0.6 5.0 5.0 ECA2CHG220( ) 200 500
33 10 20 180 0.15 2000 0.6 5.0 5.0 ECA2CHG330( ) 200 500
47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2CHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2CHG101( ) 100 250
220 16 31.5 540 0.15 2000 0.8 7.5 ECA2CHG221 100
330 18 31.5 705 0.15 2000 0.8 7.5 ECA2CHG331 50
200
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG3R3( ) 200 2000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2DHG4R7( ) 200 1000
10 10 16 80 0.15 2000 0.6 5.0 5.0 ECA2DHG100( ) 200 500
22 10 20 140 0.15 2000 0.6 5.0 5.0 ECA2DHG220( ) 200 500
33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2DHG330( ) 200 500
47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2DHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2DHG101( ) 100 250
220 18 31.5 575 0.15 2000 0.8 7.5 ECA2DHG221 50
250
2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG2R2( ) 200 2000
3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 ECA2EHG3R3 200 1000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2EHG4R7( ) 200 1000
10 10 16 88 0.15 2000 0.6 5.0 5.0 ECA2EHG100( ) 200 500
22 12.5 20 155 0.15 2000 0.6 5.0 5.0 ECA2EHG220( ) 200 500
33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2EHG330( ) 200 500
47 12.5 25 230 0.15 2000 0.6 5.0 5.0 ECA2EHG470( ) 200 500
100 16 31.5 365 0.15 2000 0.8 7.5 ECA2EHG101 100
350
2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 ECA2VHG2R2( ) 200 1000
3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 ECA2VHG3R3( ) 200 500
4.7 10 16 50 0.20 2000 0.6 5.0 5.0 ECA2VHG4R7( ) 200 500
10 10 20 82 0.20 2000 0.6 5.0 5.0 ECA2VHG100( ) 200 500
22 12.5 20 130 0.20 2000 0.6 5.0 5.0 ECA2VHG220( ) 200 500
33 16 25 195 0.20 2000 0.8 7.5 7.5 ECA2VHG330( ) 100 250
47 16 25 230 0.20 2000 0.8 7.5 7.5 ECA2VHG470( ) 100 250
100 18 31.5 375 0.20 2000 0.8 7.5 ECA2VHG101 50
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Oct. 201605
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors (Radial Lead Type)
Characteristics list
Rated
voltage
(V.DC)
Cap.
(±20 %)
(µF)
Case size (mm)
Specifi cation Lead length (mm)
Part No.
Min. Packaging Q'ty
0DL
Ripple
current
(120 Hz)
(+105 °C)
(mA r.m.s.)
tan d
(120 Hz)
(+20 °C)
Endurance
(hours)
Lead
dia.
0d
Lead space
Straight
leads
(pcs)
Taping
(pcs)
Straight
Taping
✽B
Taping
✽i
400
2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000
3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500
4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500
10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500
22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500
33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250
47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100
450
2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500
3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500
4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500
10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500
22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250
33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100
· When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping dimensions”.
Oct. 201605
