1
E
P
J
C
* RATING - “B” rating is for insert 14-5 which takes a higher voltage;
“A” rating is for other inserts.
** TYPICAL FLASHOVER VOLTAGES AT STANDARD CONDITIONS
(unsealed) Refers to connectors with no provisions for sealing front or rear areas.
(sealed) Refers to connectors that are potted or pressurized in mounting, with
front and rear areas sealed.
Volt ag e R atin g
Rating**
Mechanical
Spacing
(Nominal)
Flashover
V-RMS*
Test
V-RMS*
Recommended
Working Voltage
DC AC
Sea Level
(unsealed)
A
B
.034
.046
2,000
2,300
1,500
1,800
700
840
500
600
Sea Level
(sealed)
A
B
.034
.046
2,500
3,000
2,000
2,500
700
840
500
600
70,000 ft.
(unsealed)
A
B
.034
.046
500
600
375
450
175
210
125
150
70,000 ft.
(sealed)
A
B
.034
.046
2,500
3,000
1,500
1,800
700
840
500
600
Amphenol 67 Series “Minni E”
environmental resistant cylindrical connectors
DESIGN CHARACTERISTICS
• Approximately half the weight of standard
cylindricals
• Quick, positive, stainless steel bayonet coupling
• Operating temperatures from -67°F to +257°F per
MIL-C-5015
• Sealed connectors capable of 1500 VRMS at
70,000 ft. altitude
• Vibration resistance of 10 to 2,000 cps at 20Gs
• Interfacial seal of neoprene rubber with individual
contact barriers
• Moisture resistance exceeds MIL-C-5015 require-
ments with potting
• UL approved recognition file E115497
CUSTOMER OPTIONS
• Five shell styles
• Choice of unitized back end grommet or provision
for potting
• Seventeen insert configurations
• Four construction classes available:
•E - with unitized grommet for individual wire seal
•P - includes potting mold
•J - sealing clamp for jacketed cable
•C - vise action with two-screw strain relief
Shell components are fabricated from high grade aluminum
with gray anodize finish and stainless steel bayonet pins and
slots. Contacts are copper alloy gold over nickel plate.
Inserts are diallyl phthalate, providing high arc and insula-
tion resistance under both humidity and thermal stress con-
ditions. Positive locking action is provided by the spring-
loaded coupling ring.
Amphenol® 67 Series connectors are ideal for applications
that require a light to medium weight, durable, environmen-
tally sealed connector.
For additional information on Amphenol® 67 Series connec-
tors, or for special application requirements, contact your
local sales office, authorized distributor, or
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue
Sidney, New York 13838-1395
Phone: 607-563-5011
Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol Aerospace is a certified ISO 9001 manufacturer.
®
2
67 Series
connector applications
With
Grommet for
Individual
Wire Seal
With
Form for
Potting
Seal
With Standard
Type Cable
Clamp for
Unjacketed
Individual
Wire Leads
Plugs
67-06E
67-06P
67-06C
Panel Mounting
Receptacle
67-02E
Cable-to-Cable
Receptacles
67-01E
67-01P
67-01C
Round Flange
Receptacle
67-03E
Wall
Receptacles
67-00E
67-00P
67-00C
With Cable Seal for
Jacketed Cable
67-06J
NOTE: All dimensions for reference only.
Mounting Dimensions
(For all 67 Series square flange connectors)
Connector
Size AB
Suggested
Mounting
Hole
12 .812 1.031 .700
14 .906 1.125 .822
18 1.062 1.312 1.072
20 1.156 1.437 1.197
22 1.250 1.562 1.291
3
Suggested
67-02E 67-03E Mounting Hole
Connector
Size ABC Connector
Size ABEF
12 .662 .062 .690 12 1.031 .750 .695 .755
14 .781 .062 .812 14 1.156 .875 .820 .880
18 1.032 .093 1.062 18 1.406 1.125 1.079 1.130
20 1.156 .093 1.187 20 1.531 1.250 1.195 1.255
22 1.281 .093 1.281 22 1.656 1.375 1.320 1.380
67-06P 67-06E 67-06J 67-06C 67-01P
67-01E 67-00C 67-01C 67-00P 67-00E
NOTE: All dimensions for reference only.
Connector
Size ABCDEFGHJK
12 1.687 .093 .795 .895 1.870 .817 1.937 .706 .250 .957
14 1.687 .093 .920 1.000 1.870 .967 1.937 .812 .375 1.082
18 1.687 .093 1.170 1.250 1.870 1.185 1.937 1.062 .656 1.375
20 1.734 .093 1.223 1.375 1.970 1.312 2.312 1.187 .750 1.500
22 1.734 .093 1.352 1.468 1.970 1.440 2.312 1.317 .875 1.625
67 Series
connector applications
4
Contact Legend
16
20
shielded
Insert Arrangement 22-67 22-48 22-68 22-69
Number of Contacts 25 48 36 2 40 2
Contact Size 16 20 20 16 20 16
Current rating - #20 contact: 7.5 amps, #16 contact: 12 amps
Shielded contact: 7.5 amps
67 Series
insert arrangements
front face of insert illustrated
Insert Arrangement 12-7 12-60 14-5 14-9 14-12
Number of Contacts 7 3 5 9 12
Contact Size 20 16 20 20 20
Insert Arrangement 14-61 14-63 18-24 18-62
Number of Contacts 8 5 24 19
Contact Size 20 16 20 20
plus 1 shielded contact plus 1 shielded contact
Insert Arrangement 18-64 18-65 20-37 20-66
Number of Contacts 14 7 4 37 19
Contact Size 16 20 16 20 16
5
Alternate Insert Positions
Size Size Size
12 14 18, 20, 22
No letter
X
W
Front of socket and rear of pin insert
67 Series
how to order
Amphenol® 67 Series “Minni E” Connectors can be ordered
by coded part number. Ordering procedure is illustrated by
part number 67-06E12-7PW-100 as shown below:
67–06 E 12–7 P W – 100
Series Designation
Shell Style
Construction
Insert Arrangement
Type of Contact
Alternate Insert Positions
Deviations
Series Designation
67 –
Shell Style
00 - Wall mounting receptacle
01 - Cable mounting receptacle
02 - Panel mount receptacle
03 - Rear panel mount, round flange receptacle
06 - Cable plug - straight
Construction
E Environmentally sealed
(Unitized grommet)
P Environmentally sealed
(Disposable polyethylene potting form furnished)
J Sealing clamp for jacketed cable
(Waterproof)
C Mechanical Clamp
(Sealed only when potted)
Insert Arrangement
See available insert arrangements, page 4
Type of Contact
P - Pin
S - Socket
Deviations
100 - 100 µin. gold over silver contacts
106 - Pretinned solder wells
113 - Aluminum parts iridite finish
