RFD8P05, RFD8P05SM, RFP8P05 Data Sheet July 1999 8A, 50V, 0.300 Ohm, P-Channel Power MOSFETs * 8A, 50V Formerly developmental type TA09832. * rDS(ON) = 0.300 * UIS SOA Rating Curve * SOA is Power Dissipation Limited * Nanosecond Switching Speeds * Linear Transfer Characteristics * High Input Impedance * Related Literature - TB334 "Guidelines for Soldering Surface Mount Components to PC Boards" Ordering Information PACKAGE 2384.2 Features These products are P-Channel power MOSFETs manufactured using the MegaFET process. This process, which uses feature sizes approaching those of LSI circuits, gives optimum utilization of silicon, resulting in outstanding performance. They were designed for use in applications such as switching regulators, switching converters, motor drivers, and relay drivers. These transistors can be operated directly from integrated circuits. PART NUMBER File Number BRAND Symbol RFD8P05 TO-251AA D8P05 RFD8P05SM TO-252AA D8P05 RFP8P05 TO-220AB RFP8P05 D G NOTE: When ordering, use the entire part number. Add the suffix 9A to obtain the TO-252AA variant in tape and reel, i.e., RFD8P05SM9A. S Packaging JEDEC TO-220AB JEDEC TO-251AA SOURCE DRAIN GATE DRAIN (FLANGE) DRAIN (FLANGE) SOURCE DRAIN GATE JEDEC TO-252AA DRAIN (FLANGE) GATE SOURCE 4-112 CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright (c) Intersil Corporation 1999. RFD8P05, RFD8P05SM, RFP8P05 Absolute Maximum Ratings TC = 25oC Unless Otherwise Specified Drain to Source Voltage (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDSS Drain to Gate Voltage (RGS = 20K) (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VDGR Continuous Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID Pulsed Drain Current (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM Gate to Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VGS Maximum Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PD Dissipation Derating Factor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Pulse Avalanche Energy Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EAS Operating and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJ , TSTG Maximum Temperature for Soldering Leads at 0.063in (1.6mm) from Case for 10s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tpkg RFD8P05, RFD8P05SM, RFP8P05 -50 -50 -8 -20 20 48 0.27 See Figure 6 -55 to 175 UNITS V V A A V W W/oC oC oC oC 300 260 CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. TJ = 25oC to 150oC. Electrical Specifications TC = 25oC Unless Otherwise Specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS Drain to Source Breakdown Voltage BVDSS ID = 250A, VGS = 0V (Figure 9) -50 - - V Gate Threshold Voltage VGS(TH) VGS = VDS, ID = 250A (Figure 8) -2 - -4 V Zero Gate Voltage Drain Current IDSS Gate to Source Leakage Current IGSS Drain to Source On Resistance (Note 2) rDS(ON) Turn-On Time tON Turn-On Delay Time td(ON) Rise Time Turn-Off Delay Time VDS = Rated BVDSS, VGS = 0V - - 1 A VDS = 0.8 x Rated BVDSS, TJ = 150oC - - 25 A VGS = 20V - - 100 nA ID = 8A, VGS = -10V (Figure 7) - - 0.300 VDD = -25V, ID 4A, RG = 9.1, RL = 6.25, VGS = -10V - - 60 ns - 16 - ns tr - 30 - ns td(OFF) - 42 - ns tf - 20 - ns tOFF - - 100 ns Fall Time Turn-Off Time Total Gate Charge Qg(TOT) VGS = 0 to -20V Gate Charge at -5V Qg(-10) VGS = 0 to -10V Threshold Gate Charge Qg(TH) VGS = 0 to -2V Thermal Resistance Junction to Case RJC Thermal Resistance Junction to Ambient RJA VDD = -40V, ID = 8A,RL = 5, IG(REF) = -0.3mA TO-251AA, TO-252AA - - 80 nC - - 40 nC - - 2 nC - - 3.125 oC/W - - 100 oC/W 62.5 oC/W TO-220AB Source to Drain Diode Specifications PARAMETER TC = 25oC Unless Otherwise Specified SYMBOL Source to Drain Diode Voltage (Note 2) Reverse Recovery Time VSD trr TEST CONDITIONS MIN TYP MAX UNITS ISD = -8A - - -1.5 V ISD = -8A, dISD/dt = 100A/s - - 125 ns NOTE: 2. Pulse test: pulse width 300s, Duty Cycle 2%. 3. Repetitive rating: pulse width is limited by maximum junction temperature. 4-113 RFD8P05, RFD8P05SM, RFP8P05 Typical Performance Curves Unless Otherwise Specified -10 1.0 -8 ID, DRAIN CURRENT (A) POWER DISSIPATION MULTIPLIER 1.2 0.8 0.6 0.4 -6 -4 -2 0.2 0 0 0 25 50 75 100 125 150 25 175 50 FIGURE 1. NORMALIZED POWER DISSIPATION vs CASE TEMPERATURE IAS , AVALANCHE CURRENT (A) DC OPERATION OPERATION IN THIS AREA IS LIMITED BY rDS(ON) 1 TC = 25oC TJ = 175oC ID, DRAIN CURRENT (A) VGS = -10V VGS = -9V VGS = -8V -12 VGS = -7V -8 VGS = -6V -4 VGS = -5V VGS = -4V 0 0 -2 -4 -6 -8 VDS, DRAIN TO SOURCE VOLTAGE (V) FIGURE 5. SATURATION CHARACTERISTICS 4-114 175 If R = 0 tAV = (L) (IAS) / (1.3 RATED BVDSS - VDD) IDM STARTING TJ = 25oC STARTING TJ = 150oC 10 1 0.1 1 10 100 FIGURE 4. UNCLAMPED INDUCTIVE SWITCHING CAPABILITY -20 -16 150 tAV, TIME IN AVALANCHE (ms) FIGURE 3. FORWARD BIAS SAFE OPERATING AREA PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX TC = 25oC 125 If R 0 tAV = (L/R) ln [(IAS*R) / (1.3 RATED BVDSS - VDD) + 1] -100 -10 VDS , DRAIN TO SOURCE VOLTAGE (V) -10 IDS(ON), DRAIN TO SOURCE CURRENT (A) ID , DRAIN CURRENT (A) 100 -1 100 FIGURE 2. MAXIMUM CONTINUOUS DRAIN CURRENT vs CASE TEMPERATURE 10 0.1 75 TC, CASE TEMPERATURE (oC) TC , CASE TEMPERATURE (oC) 20 PULSE DURATION = 80s DUTY CYCLE = 0.5% MAX VDD = 15V 16 25oC 175oC 12 -55oC 8 4 0 0 -3 -6 -9 -12 VGS , GATE TO SOURCE VOLTAGE (V) FIGURE 6. TRANSFER CHARACTERISTICS -15 RFD8P05, RFD8P05SM, RFP8P05 Typical Performance Curves Unless Otherwise Specified 2.5 1.50 PULSE DURATION = 80s DUTY CYCLE =0.5% MAX VGS = -10V, ID = -8A VGS = VDS, ID = -250A 1.25 NORMALIZED GATE THRESHOLD VOLTAGE NORMALIZED ON RESISTANCE 3.0 2.0 1.5 1.0 0.5 1.00 0.75 0.50 0.25 0 -50 0 50 100 150 0 -50 200 0 TJ , JUNCTION TEMPERATURE (oC) 50 100 FIGURE 7. NORMALIZED DRAIN TO SOURCE ON RESISTANCE vs JUNCTION TEMPERATURE 200 FIGURE 8. NORMALIZED GATE THRESHOLD VOLTAGE vs JUNCTION TEMPERATURE 1000 2.0 VGS = 0V, f = 1MHz CISS = CGS + CGD CRSS = CGD COSS CDS + CGS ID = -250A 800 C, CAPACITANCE (pF) 1.5 1.0 0.5 600 CISS 400 COSS 200 CRSS 0 -50 0 0 50 100 150 0 200 TJ , JUNCTION TEMPERATURE (oC) FIGURE 9. NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE vs JUNCTION TEMPERATURE -10 -10 VDD = BVDSS GATE SOURCE VOLTAGE VDD = BVDSS -37.5 -8 RL = 6.25 IG(REF) = 0.3mA VGS = 10V -25 -6 0.75BVDSS 0.50BVDSS 0.25BVDSS -12.5 -4 DRAIN TO SOURCE VOLTAGE 0 I I 20 G(REF) TIME (s) 80 G(REF) IG(ACT) IG(ACT) -2 0 NOTE: Refer to Application Notes AN7254 and AN7260. FIGURE 11. NORMALIZED SWITCHING WAVEFORMS FOR CONSTANT GATE CURRENT 4-115 -15 -20 -25 FIGURE 10. CAPACITANCE vs DRAIN TO SOURCE VOLTAGE -50 VDS , DRAIN TO SOURCE VOLTAGE (V) -5 VDS , DRAIN TO SOURCE VOLTAGE (V) VGS , GATE TO SOURCE VOLTAGE (V) NORMALIZED DRAIN TO SOURCE BREAKDOWN VOLTAGE 150 TJ , JUNCTION TEMPERATURE (oC) RFD8P05, RFD8P05SM, RFP8P05 Test Circuits and Waveforms VDS tAV L 0 VARY tP TO OBTAIN REQUIRED PEAK IAS - RG + VDD DUT 0V VDD tP VGS IAS IAS VDS tP 0.01 BVDSS FIGURE 12. UNCLAMPED ENERGY TEST CIRCUIT FIGURE 13. UNCLAMPED ENERGY WAVEFORMS tON tOFF td(OFF) td(ON) tr 0 RL - DUT VGS + 10% 10% VDS VDD RG tf 90% 90% VGS 0 10% 50% 50% PULSE WIDTH 90% FIGURE 14. SWITCHING TIME TEST CIRCUIT FIGURE 15. RESISTIVE SWITCHING WAVEFORMS VDS RL VDS Qg(TH) 0 VGS= -1V VGS VDD Qg(-5) + DUT VGS= -5V -VGS - VGS= -10V VDD Ig(REF) Qg(TOT) 0 Ig(REF) FIGURE 16. GATE CHARGE TEST CIRCUIT 4-116 FIGURE 17. GATE CHARGE WAVEFORMS RFD8P05, RFD8P05SM, RFP8P05 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 4-117 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029