1. Product profile
1.1 General description
Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V Direct
Current (DC) in a SOT115J package. The module consists of two cascaded stages both in
cascode configuration.
1.2 Features
nExcellent linearity
nExtremely low noise
nHigh gain
nExcellent return loss properties
1.3 Applications
nSingle module line extender in CATV systems operating in the 40 MHz to 860 MHz
frequency range.
1.4 Quick reference data
[1] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
BGY835C
CATV amplifier module
Rev. 01 — 8 September 2008 Product data sheet
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken
during transport and handling.
Table 1. Quick reference data
Bandwidth 40 MHz to 860 MHz; V
B
= 24 V; T
mb
=30
°
C; Z
S
=Z
L
=75
Ω
unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Gppower gain f = 50 MHz 33.5 - 34.5 dB
f = 860 MHz 34 - - dB
Itot total current [1] - - 340 mA
http://store.iiic.cc/
BGY835C_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 8 September 2008 2 of 7
NXP Semiconductors BGY835C
CATV amplifier module
2. Pinning information
3. Ordering information
4. Limiting values
Table 2. Pinning
Pin Description Simplified outline Graphic Symbol
1 input
2 common
3 common
5+V
B
7 common
8 common
9 output
91357
2378
5
91
sym095
Table 3. Ordering information
Type number Package
Name Description Version
BGY835C - rectangular single-ended package; aluminium flange;
2 vertical mounting holes; 2 × 6-32 UNC and 2 extra
horizontal mounting holes; 7 gold-plated in-line leads
SOT115J
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VBsupply voltage - 25 V
Viinput voltage - 55 dBmV
Tstg storage temperature −40 +100 °C
Tmb mounting base temperature −20 +100 °C
http://store.iiic.cc/
BGY835C_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 8 September 2008 3 of 7
NXP Semiconductors BGY835C
CATV amplifier module
5. Characteristics
[1] 49 channels; Vo = 44 dBmV, flat output level.
[2] The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V.
Table 5. Characteristics
Bandwidth 40 MHz to 860 MHz; V
B
= 24 V; T
mb
=30
°
C; Z
S
=Z
L
=75
Ω
unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Gppower gain f = 50 MHz 33.5 - 34.5 dB
f = 860 MHz 34 - - dB
SL slope cable equivalent f = 40 MHz to 860 MHz 0.5 - 2.5 dB
FL flatness of frequency response f = 40 MHz to 860 MHz −0.5 - +0.5 dB
RLin input return loss f = 40 MHz to 80 MHz 20 - - dB
f = 80 MHz to 160 MHz 18.5 - - dB
f = 160 MHz to 320 MHz 17 - - dB
f = 320 MHz to 640 MHz 15.5 - - dB
f = 640 MHz to 860 MHz 14 - - dB
RLout output return loss f = 40 MHz to 80 MHz 20 - - dB
f = 80 MHz to 160 MHz 18.5 - - dB
f = 160 MHz to 320 MHz 17 - - dB
f = 320 MHz to 640 MHz 15.5 - - dB
f = 640 MHz to 860 MHz 14 - - dB
ϕs21 phase response f = 50 MHz 135 - 225 deg
CTB composite triple beat measured at f = 859.25 MHz [1] --−60 dB
CSO composite second-order distortion measured at f = 860.5 MHz [1] --−55 dB
NF noise figure f = 50 MHz - - 4.5 dB
f = 860 MHz - - 7 dB
Itot total current [2] - - 340 mA
http://store.iiic.cc/
BGY835C_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 8 September 2008 4 of 7
NXP Semiconductors BGY835C
CATV amplifier module
6. Package outline
Fig 1. Package outline SOT115J
UNIT A2
max. cee
1q
Q
max. q1q2U2
U1W
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 20.8 9.1 0.51
0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 4.15
3.85 2.4 38.1 25.4 10.2 4.2 44.75
44.25 8.2
7.8 0.25 0.1 3.8
bF
p
6-32
UNC
yw
0.7
x
S
DIMENSIONS (mm are the original dimensions)
SOT115J
0 5 10 mm
scale
A
max. D
max. L
min.
E
max. Z
max.
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J
D
U1q
q2
q1
b
F
S
A
Z p
E
A2
L
c
d
Q
U2
M
w
78923
Wee1
5
p
1
d
max.
xMB
yMB
B
99-02-06
04-02-04
yMB
http://store.iiic.cc/
BGY835C_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 8 September 2008 5 of 7
NXP Semiconductors BGY835C
CATV amplifier module
7. Abbreviations
8. Revision history
Table 6. Abbreviations
Acronym Description
CATV Community Antenna TeleVision
UNC UNified Coarse
Table 7. Revision history
Document ID Release date Data sheet status Change notice Supersedes
BGY835C_1 20080908 Product data sheet - -
http://store.iiic.cc/
BGY835C_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 8 September 2008 6 of 7
NXP Semiconductors BGY835C
CATV amplifier module
9. Legal information
9.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
9.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
9.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
9.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
10. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.
http://store.iiic.cc/
NXP Semiconductors BGY835C
CATV amplifier module
© NXP B.V. 2008. All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 8 September 2008
Document identifier: BGY835C_1
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
11. Contents
1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.1 General description. . . . . . . . . . . . . . . . . . . . . . 1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1
2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2
3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2
4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 5
9 Legal information. . . . . . . . . . . . . . . . . . . . . . . . 6
9.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 6
9.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10 Contact information. . . . . . . . . . . . . . . . . . . . . . 6
11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
http://store.iiic.cc/
