Ha-VIS eCon 2000 Fast Ethernet Basic PoE / PoE+ 5 to 8 Ethernet ports RJ45, FOC, and PoE / PoE+ English Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial temp.: 0C ... +55C / Industrial temp.: -40C ... +70C Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) in accordance with IEEE 802.3at Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3 Variants with industrial temperature range of -40C ... +70C Surge protection and reverse polarity protection Minimum energy consumption due to energy-efficient Ethernet Target markets Machinery & Robotics Automation Industrial network infrastructures Wind Energy, Solar Energy Transportation Shipbuilding General Description The Ha-VIS eCon 2000 Fast Ethernet PoE family of unmanaged Ethernet switches is equipped with up to 8 Fast Ethernet ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures. The switches work as power sourcing equipment (PSE) and are capable of simultaneously providing the full PoE output of 34.2 watts on up to four ports. Due to the extremely flat design, these switches can be accommodated in installations where space is restricted towards the cable connection at the front. The selection includes various combinations of variants with RJ45 and fibre optic ports. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (auto-polarity and auto-MDI(X)) allow for simple plug & play. All variants are available with the temperature ranges "Industrial" and "Commercial". Specification Switch Features Ethernet ports 10BASE-Te / 100BASE-TX EEE Housing width 120 mm Number of ports 5, 7, 8 Type of connection RJ45 Auto-negotiation Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Frame Size Auto-MDI(X) 1552 bytes MAC table size Transfer conditions 1k entries Transfer speed 448 kbit 10 / 100 Mbit/s Transfer length 100 m (Twisted Pair, Cat 5) Packet buffer size Non-blocking Yes Quality of Service Yes Energy Efficient Ethernet Yes PROFINET compatible Yes EthernetIP compatible Type of connection Yes Transfer conditions Yes Twisted pair Ethernet ports 100BASE-FX Type of fibre Multi-mode (MM) FOC Wavelength Power supply 1310 nm Transfer speed Nominal voltage 24 VDC Permissible voltage range 48 VDC Yes Reverse polarity proof Yes 3.20 A Overcurrent protection at input Max. power consumption @ 24 VDC Conductor cross-section Type of connection Pinout 6.40 A Input sensitivity 7.20 A Yes (4 A) 2.40 W ... 3.84 W 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) 3-pole, pluggable screwed contact +/-/ Supply circuit (according to 60950) SELV (circuit breaker 10 A) HARTING Technologiegruppe P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495 Electric@HARTING.com, www.HARTING.com Transfer length Output power 9 VDC ... 60 VDC Surge protection Starting current 54 VDC Single-mode (SM) SC Duplex 100 Mbit/s 2 km 15 km -19 dBm ... -14 dBm -15 dBm ... -8 dBm -32 dBm -34 dBm Ambient conditions Commercial temperature range Industrial temperature range Storage temperature range 0C ... +55C -40C ... +70C -40C ... +85 C Relative humidity (operation) 0% ... 95% (not-condensing) Relative humidity (storage and transport) 0% ... 95% (not-condensing) Air pressure 2000 m (795 hPa) Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. PoE Housing Number of PoE ports 4 Standard IEEE 802.3af / IEEE 802.3at PoE type PSE Supported mode Alternative A Power supply PSE 54 VDC 48 VDC Maximum Power consumption Maximum output power PSE 375 mA 638 mA 15.4 W per port 61.6 W total 34.2 W per port 136.8 W total Supported cabling See 802.3at, section 33.1.4 PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Status and diagnostic displays Power ("Pwr") illuminated green Supply voltage is applied Link/Activity ("L/A") off No link Link/Activity ("L/A") illuminated green Link/Activity ("L/A") flashes green Link is active Link is active and data is transferred Link speed ("Spd") off 10 Mbit/s Link speed ("Spd") illuminated yellow 100 Mbit/s PoE status off PoE is inactive / low voltage PoE status illuminated green Voltage in PoE range PoE status illuminated blue Voltage in PoE+ range PoE status illuminated red Fault Housing width Dimensions H x W x D (without pluggable screwed contact and holding bracket) 120 mm 113.5 mm x 120 mm x 27.3 mm Weight 364 g ... 420 g Type of installation 35 mm DIN rail acc. to EN 60 715 Material hoods/housings Anodised aluminium Protection class (with plugged screwed contact) IP30 Protection class III Approvals (in preparation) CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK) EMC and environmental conditions EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Resonance search IEC 60068-2-27 Shock test Scope of delivery Pluggable screwed contact for power supply Installation instructions Drawings Specifications / order information Ports / order information Commercial temp.: 0C ... +55C Industrial temp.: -40C ... +70C RJ45 SFP SC Housing width Power consumption @ 24 VDC without PoE MTBF in million h switch Order no. switch Order no. 5 - - 120 mm 100 mA 0.84 Ha-VIS eCon 2050B-A-P 24020050030 Ha-VIS eCon 2050BT-A-P 24020050020 6 - 1x MM (2 km) 120 mm 130 mA 0.78 Ha-VIS eCon 2061B-AD-P 24020061130 Ha-VIS eCon 2061BT-AD-P 24020061120 6 - 1x SM (15 km) 120 mm 130 mA 0.79 Ha-VIS eCon 2061B-AF-P 24020061230 Ha-VIS eCon 2061BT-AF-P 24020061220 6 - 2x MM (2 km) 120 mm 160 mA 0.76 Ha-VIS eCon 2062B-AD-P 24020062130 Ha-VIS eCon 2062BT-AD-P 24020062120 6 - 2x SM (15 km) 120 mm 160 mA 0.78 Ha-VIS eCon 2062B-AF-P 24020062230 Ha-VIS eCon 2062BT-AF-P 24020062220 8 - - 120 mm 100 mA 0.73 Ha-VIS eCon 2080B-A-P 24020080030 Ha-VIS eCon 2080BT-A-P 24020080020 Copyright (c) 2014 HARTING Technologie All rights reserved Date of issue 04.2014 Doc No 2402000020/98