24020080020 - HARTING

English

General Description

Speciﬁ cation

Switch Features

Housing width 120 mm

Number of ports 5, 7, 8

Switching technology Store and Forward

Supported standards IEEE 802.3

Frame Size 1552 bytes

MAC table size 1k entries

Packet buﬀ er size 448 kbit

Non-blocking Yes

Quality of Service Yes

Energy Eﬃ cient Ethernet Yes

PROFINET compatible Yes

EthernetIP compatible Yes

Ethernet ports 10BASE-Te / 100BASE-TX EEE

Type of connection RJ45

Auto-negotiation Yes

Auto-polarity Yes

Auto-MDI(X) Yes

Transfer conditions Twisted pair

Transfer speed 10 / 100 Mbit/s

Transfer length 100 m (Twisted Pair, Cat 5)

Ethernet ports 100BASE-FX

Type of ﬁ bre Multi-mode (MM) Single-mode (SM)

Type of connection SC Duplex

Transfer conditions FOC

Wavelength 1310 nm

Transfer speed 100 Mbit/s

Transfer length 2 km 15 km

Output power -19 dBm ... -14 dBm -15 dBm ... -8 dBm

Input sensitivity ≤ -32 dBm ≤ -34 dBm

Power supply

Nominal voltage 24 VDC 48 VDC 54 VDC

Permissible voltage range 9 VDC ... 60 VDC

Surge protection Yes

Reverse polarity proof Yes

Starting current 3.20 A 6.40 A 7.20 A

Overcurrent protection at input Yes (4 A)

Max. power consumption @ 24 VDC 2.40 W ... 3.84 W

Conductor cross-section 0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)

Type of connection 3-pole, pluggable screwed contact

Pinout + / - /

Supply circuit (according to 60950) SELV (circuit breaker 10 A)

The Ha-VIS eCon 2000 Fast Ethernet PoE family of unmanaged Ethernet

switches is equipped with up to 8 Fast Ethernet ports and allow for

cost-eﬃ cient and quick expansion and/or reconstruction of network

infrastructures. The switches work as power sourcing equipment (PSE) and

are capable of simultaneously providing the full PoE output of 34.2 watts

on up to four ports. Due to the extremely ﬂ at design, these switches can

be accommodated in installations where space is restricted towards the

cable connection at the front. The selection includes various combinations

of variants with RJ45 and ﬁ bre optic ports. Automatic detection of the

transmission rate (auto-negotiation) and of the wiring of the twisted pair data

cable (auto-polarity and auto-MDI(X)) allow for simple plug & play. All variants

are available with the temperature ranges "Industrial" and "Commercial".

Target markets

Machinery & Robotics Automation Industrial network

infrastructures

Wind Energy,

Solar Energy Transportation Shipbuilding

■ Energy supply of up to 4 terminal devices via PoE+ (137 watts) in

accordance with IEEE 802.3at

■ Fast Ethernet Non-Blocking Switch architecture in accordance with IEEE 802.3

■ Variants with industrial temperature range of -40°C ... +70°C

■ Surge protection and reverse polarity protection

■ Minimum energy consumption due to energy-eﬃ cient Ethernet

5 to 8 Ethernet ports RJ45, FOC, and PoE / PoE+

Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control

cabinets

Commercial temp.: 0°C ... +55°C / Industrial temp.: -40°C ... +70°C

HARTING Technologiegruppe

P.O.Box 1473, D-32325 Espelkamp

Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany

Service hotline: +49 5772 47-97100, Fax: +49 5772 47-495

Electric@HARTING.com, www.HARTING.com

Note: We reserve the right to make technical changes to the products and to the content of this

document at any time without prior notiﬁ cation. The HARTING Technologiegruppe does not ac-

cept any responsibility for possible errors or incompletions in this document. We reserve all the

rights to this document and the topics and illustrations contained within it. Copying, disclosure to

third parties or use of its content - even partially - is forbidden without the prior written consent

of the HARTING Technologiegruppe.

Ha-VIS eCon 2000 Fast Ethernet Basic PoE / PoE+

Energy

Efficient

Ethernet

Ambient conditions

Commercial temperature range 0°C ... +55°C

Industrial temperature range -40°C ... +70°C

Storage temperature range -40°C ... +85 °C

Relative humidity (operation) 0% ... 95% (not-condensing)

Relative humidity (storage and

transport) 0% ... 95% (not-condensing)

Air pressure 2000 m (795 hPa)

Drawings

Speciﬁ cations / order information

PoE

Number of PoE ports 4

Standard IEEE 802.3af / IEEE 802.3at

PoE type PSE

Supported mode Alternative A

Power supply PSE 48 VDC 54 VDC

Maximum Power consumption 375 mA 638 mA

Maximum output power PSE 15.4 W per port

61.6 W total

34.2 W per port

136.8 W total

Supported cabling See 802.3at, section 33.1.4

PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+)

Housing

Housing width 120 mm

Dimensions H x W x D (without

pluggable screwed contact and

holding bracket)

113.5 mm x 120 mm x 27.3 mm

Weight 364 g ... 420 g

Type of installation 35 mm DIN rail acc. to EN 60 715

Material hoods/housings Anodised aluminium

Protection class (with plugged

screwed contact) IP30

Protection class III

Date of issue 04.2014

Doc No 2402000020/98

HARTING Technologie

Ports / order information

Power consump-

tion @ 24 VDC

without PoE

Commercial temp.: 0°C ... +55°C Industrial temp.: -40°C ... +70°C

RJ45 SFP SC Housing

width

MTBF

in million h switch Order no. switch Order no.

5 - - 120 mm 100 mA 0.84 Ha-VIS eCon 2050B-A-P 24020050030 Ha-VIS eCon 2050BT-A-P 24020050020

6 - 1x MM (2 km) 120 mm 130 mA 0.78 Ha-VIS eCon 2061B-AD-P 24020061130 Ha-VIS eCon 2061BT-AD-P 24020061120

6 - 1x SM (15 km) 120 mm 130 mA 0.79 Ha-VIS eCon 2061B-AF-P 24020061230 Ha-VIS eCon 2061BT-AF-P 24020061220

6 - 2x MM (2 km) 120 mm 160 mA 0.76 Ha-VIS eCon 2062B-AD-P 24020062130 Ha-VIS eCon 2062BT-AD-P 24020062120

6 - 2x SM (15 km) 120 mm 160 mA 0.78 Ha-VIS eCon 2062B-AF-P 24020062230 Ha-VIS eCon 2062BT-AF-P 24020062220

8 - - 120 mm 100 mA 0.73 Ha-VIS eCon 2080B-A-P 24020080030 Ha-VIS eCon 2080BT-A-P 24020080020

Approvals (in preparation)

CE (FCC CFR 47 Part 15, cUL US 508 listed, DNV, GL, ABS, NK)

EMC and environmental conditions

EMC interference immunity (EN 61000-6-1, 61 000-6-2 55024)

Electrostatic discharge (ESD) EN 61 000-4-2

Electromagnetic ﬁ eld EN 61 000-4-3

Rapid transients (burst) EN 61 000-4-4

Surge voltages EN 61 000-4-5

Conducted interference voltages EN 61 000-4-6

EMC interference emission (EN 61000-6-4, EN 55 022, FCC CFR 47 Part 15)

Mechanical stability (EN 60721-3)

IEC 60068-2-6 Vibration

IEC 60068-2-6 Resonance search

IEC 60068-2-27 Shock test

Scope of delivery

■ Pluggable screwed contact for power supply

■ Installation instructions

Status and diagnostic displays

Power ("Pwr") illuminated green Supply voltage is applied

Link/Activity ("L/A") oﬀ No link

Link/Activity ("L/A") illuminated green Link is active

Link/Activity ("L/A") ﬂ ashes green Link is active and data is transferred

Link speed ("Spd") oﬀ 10 Mbit/s

Link speed ("Spd") illuminated yellow 100 Mbit/s

PoE status oﬀ PoE is inactive / low voltage

PoE status illuminated green Voltage in PoE range

PoE status illuminated blue Voltage in PoE+ range

PoE status illuminated red Fault