GBU8A - GBU8M Bridge Rectifiers Features * * * * * Glass-Passivated Junction Surge Overload Rating: 200 A Peak Reliable Low-Cost Construction Utilizing Molded Plastic Technique Ideal for Printed Circuit Board UL Certified: UL #E258596 www.onsemi.com PACKAGE MARKING AND ORDERING INFORMATION Part Number Marking Package Packing Method GBU8A GBU8A GBU 4L Rail GBU8B GBU8B GBU8D GBU8D GBU8G GBU8G GBU8J GBU8J GBU8K GBU8K GBU8M GBU8M SIP4 CASE 127EL MARKING DIAGRAM RU$Y&Z&3 GBU - RU $Y &Z &3 GBU8A (c) Semiconductor Components Industries, LLC, 2010 April, 2019 - Rev. 2 1 ~ 8A ~ + = UL Marking = ON Semiconductor Logo = Assembly Plant Code = Numeric Date Code = Specific Device Code Publication Order Number: GBU8B/D GBU8A - GBU8M ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) Value Parameter Symbol 8A 8B 8D 8G 8J 8K 8M Units VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V VR IF(AV) Average Rectified Forward Current TA = 100C 8.0 A TA = 45C 6.0 A 200 A IFSM Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave TSTG Storage Temperature Range -55 to +150 C Operating Junction Temperature -55 to +150 C TJ Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARECTERISTICS (TA = 25C unless otherwise noted) Parameter Value Units Power Dissipation 16 W RqJA Thermal Resistance per Leg, Junction to Ambient (Note 1) 18 C/W RqJL Thermal Resistance per Leg, Junction to Case (Note 2) 3 C/W Value Units Symbol PD 1. Device mounted on PCB with 0.5 x 0.5 inch (12 x 12 mm) 2. Heat sink mounting, 4 x 4 x 0.15 inch copper plate ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Parameter Symbol VF Forward Voltage, per Element 8.0 A 1.0 V IR Reverse Current, per Element at Rated VR TA = 25C 5.0 mA TA = 100C 500 mA I2t I2t t < 8.35 ms 166 A2s Rating for Fusing Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 GBU8A - GBU8M TYPICAL PERFORMANCE CHARACTERISTICS 100 HEAT-SINK MOUNTING, TC 4"x4"x0.15" COPPER PLATE 6 IF, Forward Current (A) IF, Average Rectified Forward Current (A) 8 4 2 0 MOUNTED ON PC BOARD, TA 0.5" (12.7 mm) LEAD LENGTH 60 Hz RESISTIVE OR INDUCTIVE LOAD 0 50 100 10 TA = 25C Pulse Width = 300 ms 1% Duty Cycle 1 0.1 0.7 150 Ambient Temperature (5C) TC = 100C IFSM, Peak Forward Surge Current (A) IR, Reverse Current (mA) 1.1 1.2 1.3 1.4 250 1 0.1 TC = 25C 0 20 40 60 80 100 120 150 100 50 0 140 TA = 25C f = 1.0 MHz Visg = 50m Vp-p 50 5 10 50 10 Figure 4. Non-Repetitive Surge Current 400 1 1 Number of Cycles at 60 Hz Figure 3. Reverse Current vs. Reverse Voltage 100 TJ = 150C 8.3 ms Single Half Sine-Wave 200 Percent of Rated Peak Reverse Voltage (%) CT, Total Capacitance (pF) 1.0 Figure 2. Forward Voltage Characteristics 10 10 0.9 VF, Forward Voltage (V) Figure 1. Forward Current Derating Curve 0.01 0.8 100 VR, Reverse Voltage (V) Figure 5. Total Capacitance www.onsemi.com 3 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SIP4 22.05x18.55 CASE 127EL ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13717G SIP4 22.05x18.55 DATE 31 DEC 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative