D-Sub Number of contacts 9--50 IP 67, turned solder cups, with front metal mounting plate No. of contacts Identification Part No. S41) Male connector D-Sub - W metal shell with dimples 9 15 25 37 50 09 67 809 09 67 815 09 67 825 09 67 837 09 67 850 . . . . . 615 615 615 615 615 9 15 25 37 50 09 67 809 09 67 815 09 67 825 09 67 837 09 67 850 . . . . . 715 715 715 715 715 Please insert digit for flange thread 4-40 UNC M3 7 9 Female connector metal shell Please insert digit for flange thread 4-40 UNC M3 06 . 12 1) S4: 0.76 m Au (30 inch) 6 8 D-Sub Number of contacts 9--50 IP 67, turned solder cups, with front metal mounting plate Identification Drawing Dimensions in mm 9-37 Male connector 50 9-37 9 - 50 contacts 50 Mating face acc. to: CECC 75.01-802 * DIN 41 652 * MIL-C-24308 D-Sub - W 4-40 UNC or M3 9-37 Female connector 50 9-37 9 - 50 contacts 50 Mating face acc. to: CECC 75.01-802 * DIN 41 652 * MIL-C-24308 4-40 UNC or M3 9 15 25 37 50 a 40.0 48.3 62.0 78.5 76.1 b 25.00 33.30 47.04 63.50 61.10 c 16.4 24.7 38.5 54.9 51.3 d 16.9 25.2 38.9 55.3 52.8 Panel cut out for front/rear mount Values are taken from the CECC 75 301-802 Front mount 9 15 25 37 50 b0.13 25.0 33.3 47.0 63.5 61.1 e0.2 22.2 30.5 44.3 60.7 58.3 Rear mount f0.2 12.3 12.3 12.3 12.3 15.1 9 15 25 37 50 b0.13 25.0 33.3 47.0 63.5 61.1 e0.2 20.5 28.8 42.5 59.1 56.3 f0.2 11.4 11.4 11.4 11.4 14.1 06 . 13