Rectangular Rosettes - Vishay

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document No: 11510

Revision 04-Feb-03

www.vishaymg.com

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

General Purpose Strain Gages - Rectangular Rosettes

FEATURES

• Gage patterns designed for determining principle stresses and strains

• All patterns have three grids orientated at 0°, 45° and 90° angles

• Both stacked and planar constructions available

• Gage lengths from 0.015 in (0.38 mm) to 0.500 in (12.7 mm)

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.015 ES 0.070 CP 0.020 ES 0.140 CP

0.38 ES 1.78 CP 0.51 ES 3.56 CP

0.18L x 0.23W 4.6L x 5.8W

Micro-miniature three-element 45° rosette with one tab common to all

sections. See also 015RJ pattern.

Note: See Strip Patterns datasheet for discussion of common-tab

gages.

EA-XX-015RC-120

SA-XX-015RC-120

015RC

120 ±0.6%

120 ±1.0%

0.015 ES 0.070 CP 0.020 ES 0.140 CP

0.38 ES 1.78 CP 0.51 ES 3.56 CP

0.19L x 0.23W 4.8L x 5.8W

Micro-miniature three-element 45° rosette. Similar to 015RC pattern

except each section has separate tabs for electrical isolation.

EA-XX-015RJ-120

SA-XX-015RJ-120

015RJ

120 ±0.6%

120 ±1.0%

E, SE

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.030 ES 0.18 M 0.030 ES 0.19 M

0.76 ES 4.4 M 0.76 ES 4.8 M

0.18L x 0.19W 4.4L x 4.8W

Miniature three-element 45° rectangular stacked rosette.

WA-XX-030WR-120

WK-XX-030WR-120

SA-XX-030WR-120

SK-XX-030WR-120

030WR

120 ±0.8%

0.031 ES 0.085 CP 0.031 ES 0.175 CP

0.79 ES 2.16 CP 0.79 ES 4.45 CP

0.19L x 0.24W 4.8L x 6.1W

Miniature 45° rectangular single-plane rosette with compact

geometry.

EA-XX-031RB-120

EP-08-031RB-120

SA-XX-031RB-120

031RB

120 ±0.4%

120 ±0.8%

0.060 ES 0.24 M 0.060 ES 0.30 M

1.52 ES 6.1 M 1.52 ES 7.6 M

0.24L x 0.30W 6.1L x 7.6W

Small three-element 45° rectangular stacked rosette.

WA-XX-060WR-120

WK-XX-060WR-120

WK-XX-060WR-350

WK-XX-060WR-10C

SA-XX-060WR-120

SK-XX-060WR-120

SK-XX-060WR-350

SK-XX-060WR-10C

060WR

120 ±0.5%

350 ±0.5%

1000 ±0.5%

120 ±0.5%

350 ±0.5%

1000 ±0.5%

E, SE, L, LE

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.062 ES 0.171 CP 0.062 ES 0.300 CP

1.57 ES 4.34 CP 1.57 ES 7.62 CP

0.42L x 0.46W

10.7L x 11.7W

Small 45° rectangular single-plane rosette with compact geometry.

See also 062RG and 062UR patterns.

EA-XX-062RB-120

WA-XX-062RB-120

WK-XX-062RB-350

EP-08-062RB-120

SA-XX-062RB-120

SK-XX-062RB-350

062RB

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

0.062 ES 0.154 CP 0.062 ES 0.400 CP

1.57 ES 3.91 CP 1.57 ES 10.16 CP

0.25L x 0.46W 6.4L x 11.7W

Small 45° rectangular single-plane rosette designed for use with

Option W. Similar to 062RG pattern except for resistance. See also

062UR pattern.

EA-XX-062RF-350

SA-XX-062RF-350

062RF

350 ±0.2%

350 ±0.4%

0.062 ES 0.154 CP 0.062 ES 0.400 CP

1.57 ES 3.91 CP 1.57 ES 10.16 CP

0.27L x 0.48W 6.9L x 12.2W

Small 45° rectangular single-plane rosette. Similar to 062RB pattern

but specifically designed for use with Option W. See also 062RF and

062UR patterns.

EA-XX-062RG-120

062RG

120 ±0.2%

E, L, LE

W, E, L, LE

*Options available but not normally recommended. See Gage Series and Optional Features datasheet for details.

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

0.062 ES 0.222 CP 0.062 ES 0.420 CP

1.57 ES 5.64 CP 1.57 ES 10.67 CP

0.32L x 0.48W 8.1L x 12.2W

Small 45° rectangular single-plane rosette in a compact geometry.

Exposed solder tab area 0.07 x 0.04 in (1.8 x 1.0 mm).

CEA-XX-062UR-120

CEA-XX-062UR-350

120 ±0.4%

350 ±0.4%

062UR ‘C’ FEATURE

0.120 ES 0.34 M 0.080 ES 0.40 M

3.05 ES 8.6 M 2.03 ES 10.2 M

0.34L x 0.40W 8.6L x 10.2W

Three-element 45° rectangular stacked rosette.

WA-XX-120WR-120

WA-XX-120WR-350

WD-DY-120WR-350

WK-XX-120WR-120

WK-XX-120WR-350

SA-XX-120WR-120

SA-XX-120WR-350

SK-XX-120WR-120

SK-XX-120WR-350

SD-DY-120WR-350

120WR

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

0.125 ES 0.275 CP 0.062 ES 0.424 CP

3.18 ES 6.99 CP 1.57 ES 10.77 CP

0.39L x 0.46W 9.9L x 11.7W

125RA

120 ±0.2%

350 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

EA-XX-125RA-120

EK-XX-125RA-350

WA-XX-125RA-120

WK-XX-125RA-350

EP-08-125RA-120

SA-XX-125RA-120

SK-XX-125RA-350

General-purpose three-element 45° rectangular rosette. Compact

geometry. See also 125RD and 125UR patterns. EK-Series gages are

supplied with duplex copper pads (DP) when optional feature W or SE is

not specified.

W, E, L, LE

W, SE

*Options available but not normally recommended. See Gage Series and Optional Features datasheet for details.

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.125 ES 0.245 CP 0.060 ES 0.620 CP

3.18 ES 6.22 CP 1.52 ES 15.75 CP

0.34L x 0.70W 8.6L x 17.8W

Three-element 45° rectangular rosette with high-resistance grid.

Similar to 125RD pattern but designed particularly for use with Option

W in the EA Series. See also 125UR pattern.

EA-XX-125RS-350

WA-XX-125RS-350

125RS

350 ±0.2%

350 ±0.4%

0.125 ES 0.300 CP 0.060 ES 0.560 CP

3.18 ES 7.62 CP 1.52 ES 14.22 CP

0.42L x 0.62W

10.7L x 15.7W

General-purpose 45° single-plane rosette. Compact geometry.

Exposed solder tab area 0.08 x 0.06 in (2.0 x 1.5 mm).

CEA-XX-125UR-120

CEA-XX-125UR-350 120 ±0.4%

350 ±0.4%

125UR ‘C’ FEATURE

0.125 ES 0.275 CP 0.062 ES 0.424 CP

3.18 ES 6.99 CP 1.57 ES 10.77 CP

0.40L x 0.47W

10.1L x 11.9W

General-purpose three-element 45° rectangular rosette. Similar to

125RA pattern except for grid resistance. See also 125RS and

125UR patterns.

EA-XX-125RD-350

WA-XX-125RD-350

SA-XX-125RD-350

125RD

350 ±0.2%

350 ±0.4%

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

E, L, LE

*Options available but not normally recommended. See Gage Series and Optional Features datasheet for details.

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

0.250 ES 0.550 CP 0.125 ES 0.847 CP

6.35 ES 13.97 CP 3.18 ES 21.51 CP

0.78L x 0.93W 19.8L x 23.6W

Large three-element 45° rectangular rosette with convenient solder tab

arrangement. See also 250RD and 250UR patterns.

EA-XX-250RA-120

WA-XX-250RA-120

WK-XX-250RA-350

EP-08-250RA-120

SA-XX-250RA-120

SK-XX-250RA-350

250RA

120 ±0.2%

120 ±0.4%

350 ±0.4%

120 ±0.2%

120 ±0.4%

350 ±0.4%

0.250 ES 0.550 CP 0.125 ES 0.847 CP

6.35 ES 13.97 CP 3.18 ES 21.51 CP

0.78L x 0.93W 19.8L x 23.6W

Large three-element 45° rectangular rosette. Similar to the 250RA

pattern except for resistance. See also 250UR pattern. EK-Series gages

are supplied with duplex copper pads (DP) when optional feature W or

SE is not specified.

EA-XX-250RD-350

EK-XX-250RD-10C

S2K-XX-250RD-10C

WA-XX-250RD-350

WK-XX-250RD-10C

EP-08-250RD-350

SA-XX-250RD-350

SK-XX-250RD-10C

250RD

350 ±0.2%

1000 ±0.2%

1000 ±0.4%

350 ±0.4%

1000 ±0.4%

350 ±0.2%

350 ±0.4%

1000 ±0.4%

0.250 ES 0.500 CP 0.120 ES 0.760 CP

6.35 ES 12.70 CP 3.05 ES 19.30 CP

0.65L x 0.80W 16.5L x 20.3W

Large three-element 45° single-plane rosette. Exposed solder tab

area 0.13 x 0.08 in (3.3 x 2.0 mm).

CEA-XX-250UR-120

CEA-XX-250UR-350 120 ±0.4%

350 ±0.4%

250UR ‘C’ FEATURE

CEA-Series Strain Gages

feature large copper

solder tabs and a completely

encapsulated grid.

Available with Option P2

(preattached leadwire cables).

W, E, L, LE

W, SE

*Options available but not normally recommended. See Gage Series and Optional Features datasheet for details.

micro-measurements@vishay.com

Rectangular Rosettes

Vishay Micro-Measurements

Document Number: 11510

Revision 04-Feb-03

www.vishaymg.com

General Purpose Strain Gages - Rectangular Rosettes

GAGE PATTERN

Actual size shown.

Enlarged when necessary for definition.

ES = Each section CP = Complete pattern

S = Section (S1= Sec 1) M = Matrix

inch

millimeter

GAGE RES. IN OHMS

DESIGNATION Tolerance is

Insert desired S-T-C increased when OPTIONS AVAILABLE

number in spaces Option W, E, SE, LE,

marked XX. or P is specified.

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

GAGE OVERALL GRID OVERALL

LENGTH LENGTH WIDTH WIDTH

MATRIX SIZE

Three-element 45° rectangular stacked rosette.

WA-XX-500WR-120

WA-XX-500WR-350

WD-DY-500WR-350

WK-XX-500WR-350

SA-XX-500WR-120

SA-XX-500WR-350

SK-XX-500WR-350

SD-DY-500WR-350

500WR

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

0.500 ES 0.76 M 0.120 ES 0.84 M

12.70 ES 19.3 M 3.05 ES 21.3 M

0.76L x 0.84W 19.3L x 21.3W

0.250 ES 0.51 M 0.125 ES 0.60 M

6.35 ES 13.0 M 3.18 ES 15.2 M

0.51L x 0.60W 13.0L x 15.2W

Four-element tee-rectangular stacked rosette. This is a 45°

rectangular configuration with a fourth grid element at 90° to the center

gage.

WA-XX-250WF-120

WA-XX-250WF-350

WD-DY-250WF-350

WK-XX-250WF-120

WK-XX-250WF-350

SA-XX-250WF-120

SA-XX-250WF-350

SK-XX-250WF-120

SK-XX-250WF-350

SD-DY-250WF-350

250WF

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

0.250 ES 0.51 M 0.125 ES 0.60 M

6.35 ES 13.0 M 3.18 ES 15.2 M

0.51L x 0.60W 13.0L x 15.2W

Three-element 45° rectangular stacked rosette.

WA-XX-250WR-120

WA-XX-250WR-350

WD-DY-250WR-350

WK-XX-250WR-120

WK-XX-250WR-350

SA-XX-250WR-120

SA-XX-250WR-350

SK-XX-250WR-120

SK-XX-250WR-350

SD-DY-250WR-350

250WR

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

120 ±0.5%

350 ±0.5%

*Options available but not normally recommended. See Gage Series and Optional Features datasheet for details.