SEAF-20-05.0-S-10-2-A-K-TR F-219 (Rev 08MAY20) SEAF-30-05.0-S-08-2-A-K-TR (1.27 mm) .050" SEAF SERIES SEAF-30-05.0-S-08-2-A-LP-K-TR HIGH-SPEED/HIGH-DENSITY OPEN-PIN-FIELD Board Mates: SEAM, SEAMP, SEAR, SEAMI Cable Mates: SEAC* Standoffs: JSO SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SEAF Insulator Material: Black LCP Contact Material: Copper Alloy Operating Temp Range: -55 C to +125 C Current Rating (7 mm stack height): 2.7 A per pin (10 adjacent pins powered) Plating: Au or Sn over 50 " (1.27 m) Ni Working Voltage: 240 VAC RoHS Compliant: Yes (-2 Solder type only) Lead-Free Solderable: Yes Up to 500 pins (1.12 mm) .044" NOMINAL WIPE 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES *NOTE: SEAFC is recommended to mate to SEAC cable. Visit www.samtec.com?SEAFC for specifications. Low insertion/ extraction forces HIGH-SPEED CHANNEL PERFORMANCE SEAF/SEAM @ 10 mm Mated Stack Height Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality NO. PINS PER ROW LEAD STYLE -10, -15, - 20, - 30, -40, -50 Specify LEAD STYLE from chart SEAF Solder charges PLATING OPTION NO. OF ROWS -L - 04 SOLDER TYPE A OPTION K "X"R FILE NO. E111594 STANDARDS *VITA 47 *VITA 57.1 FMC *VITA 57.4 FMC+ *VITA 74 VNX *PISMOTM 2 Visit www.samtec.com/standards for more information. DIFFERENTIAL SIGNAL ROUTING (1.27) .050 (-10 only available in 04 row) (-15 only available in 04 or 10 row with -05.0 lead style) NO. OF B ROWS (5.66) .223 -04 -05, -06 (8.20) .323 (10.74) .423 -08 (13.28) .523 -10 LEAD STYLE = 10 " (0.25 m) Gold on contact area, Matte Tin on solder tail -06.0 (6.05) .238 -07.5 - 05 =Five Rows - 06 -S A -05.0 (5.05) .199 -06.5 =Four Rows (6.55) .258 (7.54) .297 =Six Rows = 30 " (0.76 m) Gold on contact area, Matte Tin on solder tail The above signal routing configuration allows for the use of 25 to 125 differential pair counts. Contact sig@samtec.com for specific details. Notes: IPC-A-610F and IPC J-STD-001F Class 3 solder joint. Some sizes, styles and options are non-standard, non-returnable. -2 = Lead-Free Solder Charge - LP = Latch Post (-LP required for SEAC mate only) (Available with -05.0 lead style and -04, -06, -08 & -10 rows only) - 08 =Eight Rows =Ten Rows H1 -TR = Tape & Reel -FR = Full Reel Tape & Reel Packaging (Must order max. quantities per reel. Contact Samtec for parts per reel) POWER/SIGNAL APPLICATION - 10 (1.27) .050 (1.27) .050 -1 = Tin/Lead Alloy Solder Charge (1.27) .050 B No. of positions x (1.27) .050 + (5.82) .229 (1.27) .050 A1 (15.49) .610 (1.78) .070 A (1.12) .044 DIA No. of positions x (1.27) .050 + (3.58) .141 (0.29) .009 -LP Compatible with UMPT/UMPS for flexible two-piece power/signal solutions Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.