Non-polarized 1 Form C Relay FEATURES 7.4 .291 12 .472 HY-RELAYS * High sensitivity: 150 mW/200 mW * A wide range of ambient temperature: -40C to +70C -40F to +158F * Sealed construction * Rating: 1 A 30 V DC 10.1 .398 mm inch SPECIFICATIONS Characteristics (at 25C 77F, 50% Relative humidity) Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) 1 Form C 100 m Contact material Rating (resistive) Expected life (min. operations) Max. operating speed Between contacts Initial insulation Between contact and resistance*1 coil Gold-clad silver 1 A 30 V DC 30 W 60 V DC 1A 2A 107 Nominal switching capacity Max. switching power Max. switching voltage Max. switching current Max. carrying current Mechanical (at 180 cpm) Electrical (at 20 cpm) 1 A 30 V DC Between open contacts Between contacts and coil Operate time*3 (at nominal voltage) Release time (without diode)*3 (at nominal voltage) Temperature rise at nominal voltage Contact carrying current 1 A at 20C Functional*4 Shock resistance Destructive*5 Initial breakdown voltage*2 105 Coil Nominal operating power Standard type High sensitivity type 200 mW 150 mW Functional*6 Remarks Vibration resistance * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61) Destructive Conditions for opera- Ambient tion, transport and temp. storage*7 (Not freezing and condensing Humidity at low temperature) Unit weight 20 cpm (at nominal voltage) Min. 100 M at 500 V DC Min. 100 M at 500 V DC 500 Vrms 1,000 Vrms Max. 5 ms (approx. 2 ms) Max. 4 ms (approx. 1 ms) Max. 50C Min. 98 m/s2 (10 G) Min. 980 m/s2 (100 G) 58.8 m/s2 {6 G}, 10 to 55 Hz at double amplitude of 1 mm 117.6 m/s2 {12 G}, 10 to 55 Hz at double amplitude of 2 mm -40C to +70C -40F to +158F 5 to 85% R.H. 1.8 g .063 oz TYPICAL APPLICATIONS * Low-voltage signal switching and motor control of small home appliances such as portable video tape recorders and audio devices. * Automotive: Switching to small motor 1) Automirrow controller 2)Retractable head light controller * Push button device: Dial pulsing * Operating of dish-control motors for PCs and word processors ORDERING INFORMATION Ex. HY 1 3V Contact arrangement Sensitivity Coil voltage (DC) 1: 1 Form C Nil: High sensitivity 150 mW Z: Standard 200 mW 1.5, 3, 4.5, 5, 6, 9, 12, 24 V Standard packing: Carton: 100 pcs. Case 500 pcs. 180 Z HY TYPES AND COIL DATA (at 20C 68F) Standard packing: Carton: 100 pcs. Case: 500 pcs. 200 mW Standard type Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) HY1Z-1.5V HY1Z-3V HY1Z-4.5V HY1Z-5V HY1Z-6V HY1Z-9V HY1Z-12V HY1Z-24V 1.5 3 4.5 5 6 9 12 24 1.125 2.25 3.375 3.75 4.5 6.75 9 18 Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 11.25 45 101.2 125 180 405 720 2,880 Nominal operating current, mA 133.3 66.7 44.5 40 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 200 200 Max. allowable voltage, V DC (at 70C 158F) 1.8 3.6 5.4 6 7.2 10.8 14.4 28.8 Nominal operating current, mA 100 50 33.3 30.1 25 16.7 12.5 6.25 Nominal operating power, mW 150 150 150 150 150 150 150 150 Max. allowable voltage, V DC (at 70C 158F) 2.1 4.2 6.3 7 8.4 12.6 16.8 33.6 150 mW High sensitivity type Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) 1.5 3 4.5 5 6 9 12 24 1.125 2.25 3.375 3.75 4.5 6.75 9 18 HY1-1.5V HY1-3V HY1-4.5V HY1-5V HY1-6V HY1-9V HY1-12V HY1-24V Drop-out voltage, V DC (min.) 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 15 60 135 166 240 540 960 3,840 DIMENSIONS mm inch PC board pattern (Copper-side view) 2.54 .100 7.62 .300 (0.82) (.032) 12 .462 7.4 .291 10.1 .398 6-1 dia. 6-.039 dia. 5.08 .200 0.5 .020 2.54 .100 3.5 .138 0.5 .020 5.08 .200 0.25 .010 2.54 .100 0.4 dia. .016 dia. 2.54 .100 0.25 .010 7.62 .300 Schematic (Bottom view) N.C. (0.82) (.032) COM N.O. General tolerance: 0.3 .012 Tolerance: 0.1 .004 REFERENCE DATA 1. Maximum switching power 2. Life curve 3. Mechanical life 5.0 2.0 300 200 30 V DC resistive load 100 Life, x104 Contact current, A DC resistive AC resistive 1.0 50 30 20 10 0.5 100 V AC resistive load 0.2 Ratio against the rated voltage, %V Tested sample: HY1Z-12V, 10 pcs. Ambient temperature: 20C to 25C 68F to 77F 100 90 80 70 Pick-up voltage 60 Max. 50 Min. 40 Drop-out voltage 30 Max. 20 Min. 10 0.1 10 30 60 100 300 Contact voltage, V 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Switching current, A 0 10 100 1,000 2,000 No. of operations, x104 181 HY 4. Electrical life Change of pick-up and drop-out voltage N.C. side: 3 pcs. N.O. side: 3 pcs. 90 Pick-up voltage 80 70 Max. 60 Min. 50 40 Drop-out voltage Max. 30 20 Min. 10 No. of operations, x104 5-(2). Coil temperature rise (200 mW Standard type) Tested sample: HY1-9V, 5 pcs. Ambient temperature:24C 75F Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 23C 74F 100 100 90 90 1A 60 50 0A 40 30 Coil temperature rise, C Coil temperature rise, C 5-(1). Coil temperature rise (150 mW high sensitivity type) 70 20 Max. 40 Min. 20 0 20 10 20 No. of operations, x 104 6. Operate/release time characteristics Tested sample: HY1Z-12V, 5 pcs. Ambient temperature: 25C 77F 3 80 1A 70 60 0A 50 40 30 Operate time 2 1 Release time 20 10 0 60 10 0 80 80 Operate/release time, ms Circuit: Change of contact resistance 100 Contact resistance, m Ratio against the rated voltage, %V Tested sample: HY1-12V, 6 pcs. Condition: 1 A 30 V DC resistive load, 30 cpm 10 80 100 0 120 140 160 180 Coil applied voltage, %V 80 100 120 140 160 180 Coil applied voltage, %V 0 80 100 120 Coil applied voltage, %V 7. Distribution of pick-up and drop-out voltages 8. Distribution of contact resistance 9. Malfunction shock Tested sample: HY1-12V, 50 pcs. Ambient temperature: 23C 74F Tested sample: HY1-12V, 50 pcs. N.C. side N.O. side Tested sample: HY1Z-12V, 6 pcs. 30 30 Drop-out voltage 20 Pick-up voltage 15 20 Y Z X X' Z' 980m/s 2 Y Y' 980m/s 2 X Deenergized condition Energized condition Z 980m/s 2 15 10 10 5 5 0 0 10 20 30 40 50 60 70 80 90 100 Pick-up/drop-out voltage, V N.C. side N.O. side 25 Quantity Quantity 25 Max. x Min. Max. x Min. 980m/s 2 Z' 980m/s 2 X' 980m/s 2 Y' 30 40 Contact resistance m NOTE Soldering and cleaning HY relays have the sealed construction. It is possible to do automatic soldering and automatic cleaning, but avoid the ultrasonic cleaning. For cleaning, it is recommended that a fluorinated hydrocarbon or other alcoholic solvent be used. For Cautions for Use, see Relay Technical Information (Page 48 to 76). 182 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. Go To Online Catalog