Telecom-, Signal and RF Relays
AXICOM
P2 V23079 Relay
108-98002 • Aug. 08 Rev. F • ECOC: JM10
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Index
Dimensions 4
Coil Operating Range 5
Relay Code 6
Coil Data and Ordering Information 7
Contact Data 10
Insulation 11
General Data 11
Packing 13
UL 508 File No. E 111441
UL 60950
IEC/EN60950 IEC Ref. Cert. No. 3271
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
tness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Speci-
cations are subject to change without notice.
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
2 pole telecom / signal relay, polarized,
Through Hole Type (THT) or
Surface Mount Technology (SMT),
Relay types: non-latching with 1 coil
latching with 2 coils
latching with 1 coil
ROHS compliant (Directive 2002/95/EC) as per
product date code 0427.
Features
• Standard telecom relay (ringing and test access)
• Slim line 15 x 7.5 mm, 0.590 x 0.295 inch
• Switching current 5 A
• 2 changeover contacts (2 form C / DPDT)
• Bifurcated contacts
• Immersion cleanable
• High sensitivity results in low nominal power
consumption 140 mW for non-latching and latching
with 2 coils 70 mW for latching with 1 coil
• For single coil version:
- Surge voltage resistance between
contact and coil for single coil version:
- 2.5 kV (2 / 10 µs) meets the Telcordia
Requirement GR-1089
- 1.5 kV (10 / 160 µs) meets FCC Part 68
Typical applications
• Communications equipment linecard application
(ringing and test access)
PABX
Voice over IP
• Ofce equipment
• Measurement and control equipment
• Automotive equipment
CAN bus, keyless entry, speaker switch
• Medical equipment
• Consumer electronics
Set Top Boxes, HiFi
Options
• 1500 Vrms between open contacts
Insulation category
Basic insulation according IEC / EN 60950
Working voltage ≤ 300 Vrms
Mains supply voltage ≤ 250 Vrms
Repetitive peak voltage 2500 V
Pollution degree Internal: 1
External: 2
Flammability classication V-0
Maximum operating temperature 85 °C
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Dimensions Dimensions in mm
THT Version
Mounting hole layout
View onto the component side
of the PCB (top view)
Terminal assignment
Relay – top view
Non-latching type
not energized condition
Latching type,
reset condition
Latching, 2 coils
reset condition
Contacts in reset position.
Both coils can be used either
as set or reset coils.
THT
V23079-x1xxx-B301
standard coil
THT
V23079-x2xxx-B301
overmolded coil
SMT long terminals
V23079-x1xxx-B301
standard coil
SMT long terminals
V23079-x2xxx-B301
overmolded coil
SMT short terminals
V23079-x1xxx-B301
standard coil
SMT short terminals
V23079-x2xxx-B301
overmolded coil
mm inch mm inch mm inch mm inch mm inch mm inch
L
W
H
14.5 ± 0.10
7.2 ± 0.10
9.8 ± 0.10
0.570 ± 0.004
0.283 ± 0.004
0.385 ± 0.004
14.6 ± 0.10
7.2 ± 0.10
9.5 ± 0.10
0.575 ± 0.004
0.283 ± 0.004
0.374 ± 0.004
14.5 ± 0.10
7.2 ± 0.10
10.4 ± 0.15
0.570 ± 0.004
0.283 ± 0.004
0.409 ± 0.006
14.6 ± 0.10
7.2 ± 0.10
9.9 ± 0.10
0.575 ± 0.004
0.283 ± 0.004
0.390 ± 0.004
14.5 ± 0.10
7.2 ± 0.10
10.4 ± 0.15
0.570 ± 0.004
0.283 ± 0.004
0.409 ± 0.006
14.6 ± 0.10
7.2 ± 0.10
9.9 ± 0.10
0.575 ± 0.004
0.283 ± 0.004
0.390 ± 0.004
T
T1
T2
Tw
S
3.25 – 0.25
N/A
N/A
0.5 ± 0.05
0.55 – 0.15
0.128 – 0.010
N/A
N/A
0.020 ± 0.002
0.022 – 0.006
3.25 – 0.25
N/A
N/A
0.5 ± 0.05
0.45
0.128 – 0.010
N/A
N/A
0.020 ± 0.002
0.018 ± 0.002
N/A
5.52 ± 0.15
9.4 ± 0.15
0.5 ± 0.05
N/A
N/A
0.217 ± 0.006
0.370 ± 0.006
0.020 ± 0.002
N/A
N/A
5.52
9.4 ± 0.15
0.5 ± 0.05
N/A
N/A
0.217 ± 0.006
0.370 ± 0.006
0.020 ± 0.002
N/A
N/A
5.52
7.4 ± 0.15
0.5 ± 0.05
N/A
N/A
0.217 ± 0.006
0.291 ± 0.006
0.020 ± 0.002
N/A
N/A
5.52
7.4 ± 0.15
0.5 ± 0.05
N/A
N/A
0.217 ±0.006
0.291 ±0.006
0.020 ±0.002
N/A
SMT Version
�
�
P2 SMT S
Long terminals Short terminals
0,9 ±0,1
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Note: Solder pad for pin 6 and 7
only for latching with 2 coils
Solder pad layout
View onto the component side of the PCB (top view)
Long terminals Short terminals
Note: Hole for pin 6 and 7 only
for latching with 2 coils. Basic
grid 2.54 mm
Latching type: Contacts in re-
set position. Contact position
might change during trans-
portation and must be reset
before use.
Coplanarity ≤ 0.1mm Coplanarity ≤ 0.1mm
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Coil Operating Range
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage) when coils are
continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
For latching relays Uset min. resp. Ureset min.
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
3
3.2
3.4
-40-30 -20-10 0102030405060708090100 110 120 130 140
Coil Voltage [U/Unom]
Uop. min.
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
70 mW
Unom. nominal coil voltage
Ambient Temperature [°C]
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
-40 -30 -20 -10 0102030405060708090 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/Unom]
140 mW
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
-40 -30 -20 -10 0102030405060708090 100 110 120 130 140
Ambient Temperature [°C]
Coil Voltage [U/Unom]
200 mW
Umax. at 0 A
Umax. at 2 x 2 A
Umax. at 2 x 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
SMT version with long terminals
D = non-latching, 1 coil
E = latching, 2 coils
F = latching, 1 coil
SMT version with short terminals
G = non-latching, 1 coil
H = latching, 2 coils
J = latching, 1 coil
Coil type
1 = standard coil; B1, E1, F1, J1, H1
2 = overmolded coil, A1*, A2, C1*, D1*, D2, G1*, G2
(only non latching versions, i.e. relay type A, D, G)
*both standard and overmolded coil possible
Coil number
Non Latching, 1 coil Latching, 1 coil Latching, 2 coils
008 = 3 V nominal voltage 108 = 3 V nominal voltage 219 = 2.0 V
011= 4.5 V 111 = 4.5 V 218 = 2.4 V nominal voltage
001 = 5 V 101 = 5 V 208 = 3 V
002 = 6 V 102 = 6 V 211 = 4.5 V
006 = 9 V 106 = 9 V 201 = 5 V
003 = 12 V 103 = 12 V 202 = 6 V
005 = 24 V 105 = 24 V 206 = 9 V
203 = 12 V
205 = 24 V
V23079
Identication of the
Miniature Relay P2
Relay type
THT version
A = non-latching, 1 coil
B = latching, 2 coils
C = latching, 1 coil
Contact arrangement / material
B301 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated
B201 = 2 changeover contacts; silver palladium, gold-plated, against silver palladium
Ordering example: V23079-D2001-B301
Miniature relay P2 SMT version with long terminals (overmolded coil), non-latching, 1 coil, 5 V nominal voltage,
2 changeover contacts, silver nickel gold-covered contacts
Relay Code
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
THT Standard, non-latching, standard 1 coil
3 2.25 6.50 0.30 140 64 V23079-A1008-B301 2-1393788-2
4 3.00 8.70 0.40 140 114 V23079-A1016-B301 2-1393788-9
4.5 3.38 9.80 0.45 140 145 V23079-A1011-B301 2-1393788-4
5 3.75 10.90 0.50 140 178 V23079-A1001-B301 1393788-3
6 4.50 13.00 0.60 140 257 V23079-A1002-B301 1393788-8
9 6.75 19.60 0.90 140 578 V23079-A1006-B301 2-1393788-0
12 9.00 26.15 1.20 140 1029 V23079-A1003-B301 1-1393788-1
24 18.00 52.30 2.40 140 4114 V23079-A1005-B301 1-1393788-6
THT non-latching, overmolded 1 coil
3 2.25 6.50 0.30 140 64 V23079-A2008-B301 6-1419120-6
4.5 3.38 9.80 0.45 140 145 V23079-A2011-B301 3-1393789-9
5 3.75 10.90 0.50 140 178 V23079-A2001-B301 3-1393789-5
6 4.50 13.00 0.60 140 257 V23079-A2002-B301 3-1393789-6
9 6.75 19.60 0.90 140 578 V23079-A2006-B301 3-1393789-8
12 9.00 26.15 1.20 140 1029 V23079-A2003-B301 3-1393789-7
THT latching, standard 2 coils
2.4 1.80 5.20 1.80 140 41 V23079-B1218-B301 1422002-8
3 2.25 6.50 2.25 140 64 V23079-B1208-B301 4-1393788-1
4.5 3.38 9.80 3.38 140 145 V23079-B1211-B301 4-1393788-2
5 3.75 10.90 3.75 140 178 V23079-B1201-B301 3-1393788-3
6 4.50 13.00 4.50 140 257 V23079-B1202-B301 3-1393788-5
9 6.75 19.60 6.75 140 578 V23079-B1206-B301 3-1393788-9
12 9.00 26.15 9.00 140 1029 V23079-B1203-B301 3-1393788-6
24 18.00 52.30 18.00 140 4114 V23079-B1205-B301 3-1393788-7
THT latching, overmolded 2 coils
2 1.50 4.30 1.50 140 28 V23079-B2219-B301 1-1422002-2
2.4 1.80 5.20 1.80 140 41 V23079-B2218-B301 1-1422002-1
3 2.25 6.50 2.25 140 64 V23079-B2208-B301 1-1422002-0
5 3.75 10.90 3.75 140 178 V23079-B2201-B301 1422002-9
THT latching, standard 1 coil
3 2.25 9.20 -2.25 70 128 V23079-C1108-B301 5-1393788-3
4.5 3.38 13.85 -3.38 70 289 V23079-C1111-B301 5-1393788-4
5 3.75 15.33 -3.75 70 357 V23079-C1101-B301 4-1393788-5
6 4.50 18.50 -4.50 70 514 V23079-C1102-B301 4-1393788-7
9 6.75 27.75 -6.75 70 1157 V23079-C1106-B301 5-1393788-1
12 9.00 37.00 -9.00 70 2057 V23079-C1103-B301 4-1393788-8
24 18.00 74.00 -18.00 70 8228 V23079-C1105-B301 5-1393788-0
SMT long pins, non-latching, standard 1 coil
3 2.25 6.50 0.30 140 64 V23079-D1008-B301 6-1393788-1
4.5 3.38 9.80 0.45 140 145 V23079-D1011-B301 6-1393788-2
5 3.75 10.90 0.50 140 178 V23079-D1001-B301 5-1393788-5
6 4.50 13.00 0.60 140 257 V23079-D1002-B301 5-1393788-6
9 6.75 19.60 0.90 140 578 V23079-D1006-B301 5-1393788-9
12 9.00 26.15 1.20 140 1029 V23079-D1003-B301 5-1393788-7
24 18.00 52.30 2.40 140 4114 V23079-D1005-B301 5-1393788-8
Further coil versions are available on request.
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
SMT long pins, non-latching, overmolded 1 coil
3 2.25 6.50 0.30 140 64 V23079-D2008-B301 4-1393789-7
4.5 3.38 9.80 0.45 140 145 V23079-D2011-B301 4-1393789-8
5 3.75 10.90 0.50 140 178 V23079-D2001-B301 4-1393789-3
6 4.50 13.00 0.60 140 257 V23079-D2002-B301 4-1393789-4
9 6.75 19.60 0.90 140 578 V23079-D2006-B301 4-1393789-6
12 9.00 26.15 1.20 140 1029 V23079-D2003-B301 4-1393789-5
SMT long pins, latching, standard 2 coils
2 1.50 4.33 1.50 140 28 V23079-E1219-B301 1-1422007-0
2.4 1.80 5.20 1.80 140 41 V23079-E1218-B301 1422007-5
3 2.25 6.50 2.25 140 64 V23079-E1208-B301 7-1393788-1
4.5 3.38 9.80 3.38 140 145 V23079-E1211-B301 7-1393788-2
5 3.75 10.90 3.75 140 178 V23079-E1201-B301 6-1393788-8
6 4.50 13.00 4.50 140 257 V23079-E1202-B301 1393789-5
9 6.75 19.60 6.75 140 578 V23079-E1206-B301 1393789-9
12 9.00 26.15 9.00 140 1029 V23079-E1203-B301 6-1393788-9
24 18.00 52.30 18.00 140 4114 V23079-E1205-B301 7-1393788-0
SMT long pins, latching, standard 1 coil
3 2.25 9.20 -2.25 70 128 V23079-F1108-B301 7-1393788-5
4.5 3.38 13.85 -3.38 70 289 V23079-F1111-B301 1-1393789-4
5 3.75 15.33 -3.75 70 357 V23079-F1101-B301 7-1393788-3
6 4.50 18.50 -4.50 70 514 V23079-F1102-B301 1-1393789-0
9 6.75 27.75 -6.75 70 1157 V23079-F1106-B301 1-1393789-2
12 9.00 37.00 -9.00 70 2057 V23079-F1103-B301 7-1393788-4
24 18.00 74.00 -18.00 70 8228 V23079-F1105-B301 1-1393789-1
SMT short pins, non-latching, standard 1 coil
3 2.25 6.50 0.30 140 64 V23079-G1008-B301 8-1393788-0
4.5 3.38 9.80 0.45 140 145 V23079-G1011-B301 1-1393789-7
5 3.75 10.90 0.50 140 178 V23079-G1001-B301 7-1393788-6
6 4.50 13.00 0.60 140 257 V23079-G1002-B301 1-1393789-5
9 6.75 19.60 0.90 140 578 V23079-G1006-B301 1-1393789-6
12 9.00 26.15 1.20 140 1029 V23079-G1003-B301 7-1393788-7
24 18.00 52.30 2.40 140 4114 V23079-G1005-B301 7-1393788-8
Further coil versions are available on request.
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Coil Data (values at 23 °C) Ordering Information
Further coil versions are available on request.
SMT short pins, non-latching, overmolded 1 coil
3 2.25 6.50 0.30 140 64 V23079-G2008-B301 5-1393789-4
4 3.00 8.70 0.40 140 114 V23079-G2016-B301 1393790-5
4.5 3.38 9.80 0.45 140 145 V23079-G2011-B301 5-1393789-5
5 3.75 10.90 0.50 140 178 V23079-G2001-B301 4-1393789-9
6 4.50 13.00 0.60 140 257 V23079-G2002-B301 5-1393789-0
9 6.75 19.60 0.90 140 578 V23079-G2006-B301 5-1393789-3
12 9.00 26.15 1.20 140 1029 V23079-G2003-B301 5-1393789-1
SMT short pins, latching, standard 2 coils
3 2.25 6.50 2.25 140 64 V23079-H1208-B301 2-1393789-4
4.5 3.38 9.80 3.38 140 145 V23079-H1211-B301 8-1393788-4
5 3.75 10.90 3.75 140 178 V23079-H1201-B301 2-1393789-0
6 4.50 13.00 4.50 140 257 V23079-H1202-B301 2-1393789-1
9 6.75 19.60 6.75 140 578 V23079-H1206-B301 2-1393789-3
12 9.00 26.15 9.00 140 1029 V23079-H1203-B301 8-1393788-3
24 18.00 52.30 18.00 140 4114 V23079-H1205-B301 2-1393789-2
SMT short pins, latching, standard 1 coils
3 2.25 9.20 -2.25 70 128 V23079-J1108-B301 2-1393789-9
4.5 3.38 13.85 -3.38 70 289 V23079-J1111-B301 3-1393789-0
5 3.75 15.33 -3.75 70 357 V23079-J1101-B301 2-1393789-5
6 4.50 18.50 -4.50 70 514 V23079-J1102-B301 2-1393789-6
12 9.00 37.00 -9.00 70 2057 V23079-J1103-B301 2-1393789-7
24 18.00 74.00 -18.00 70 8228 V23079-J1105-B301 2-1393789-8
High Dielectric Version
SMT short pins, non-latching, overmolded 1 coil
3 2.25 6.10 0.30 200 45 V23079-G2008-X079 1422006-5
5 3.75 10.10 0.50 200 125 V23079-G2001-X071 1422006-1
6 4.50 12.10 0.60 200 180 V23079-G2002-X072 1422006-2
9 6.75 18.20 0.90 200 405 V23079-G2006-X073 1422006-3
12 9.00 24.20 1.20 200 720 V23079-G2003-X074 1422006-4
Nominal
voltage
Unom
Operate/set voltage range Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
voltage Umin
Maximum
voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Contact Data
Number of contacts and type 2 changeover contacts
Contact assembly Bifurcated contacts
Contact material Silver nickel, gold-covered
Limiting continuous current at max. ambient temperature 2 A
Maximum switching current 5 A
Maximum swichting voltage 220 Vdc
250 Vac
Maximum switching capacity 60 W, 62.5 VA
Thermoelectric potential < 10 µV
Minimum switching voltage 100 µV
Initial contact resistance / measuring condition: 10 mA / 20 mV < 50 mΩ
Electrical endurance at 12 V / 10 mA
at 6 V / 100 mA
at 60 V / 500 mA
at 30 V / 1000 mA
at 30 V / 2000 mA
typ. 5 x 107 operations
typ. 1 x 107 operations
typ. 5 x 105 operations
typ. 1 x 106 operations
typ. 2 x 105 operations
Mechanical endurance typ. 108 operations
UL contact ratings 220 Vdc / 0.24 A - 60 W
125 Vdc / 0.24 A - 30 W
250 Vac / 0.25 A - 62.5 VA
125 Vac / 0.5 A - 62.5 VA
30 Vdc / 2 A - 60 W
Max. DC Load Breaking Capacity
DC Voltage [Vdc]
DC current [A]
resistive load
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 11 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Insulation
Standard Version High dielectric Version
Insulation resistance at 500 Vdc > 109 Ω > 109 Ω
Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
1500 Vrms
1000 Vrms
1000 Vrms
1500 Vrms
1500 Vrms
1500 Vrms
Surge voltage resistance
according to Telcordia TR-NWT-001089 (2 /10 µs)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
according to (10/700 µs IEC 60950)
between coil and contacts (Relay with 1 coil)
between adjacent contact sets
between open contacts
2500 V
2500 V
2000 V
2500 V
2500 V
2000 V
2500 V
2500 V
2500 V
2500 V
2500 V
2500 V
Insulation according to IEC / EN 60950
Clearance
Creepage distance
Basic insulation
1.3 mm
2.5 mm
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 1.5 pF
max. 1 pF
RF Characteristics
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
- 39.0 dB / - 20.7 dB
- 0.02 dB / - 0.27 dB
1.04 / 1.40
General Data
Operate time at Unom typ. / max. 3 ms / 4 ms
Reset time (latching) at Unom , typ. / max. 3 ms / 4 ms
Duration of set / reset pulse (latching) min. 20ms*
Release time without diode in parallel (non-latching), typ. / max. 2 ms / 4 ms
Release time with diode in parallel (non-latching), typ. / max. 4 ms / 6 ms
Bounce time at closing contact, typ. / max. 1 ms / 3 ms
Maximum switching rate without load 50 operations/s
Ambient temperature -40 °C ... +85 °C
Thermal resistance < 125 K/W
Maximum permissible coil temperature 125 °C
Vibration resistance (function) 35 G
10 to 1000 Hz
Shock resistance, half sinus, 11 ms 50 G (function)
150 G (damage)
Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III
Needle ame test application time 20 s, no burning < 15s
Mounting position any
Processing information Ultrasonic cleaning is not recommended
Weight (mass) max. 2.8 g
Terminal surface SnCu 0.7
Moisture sensitive level (JEDEC J-STD-020B) - SMD types MSL 3
Resistance to soldering heat 265 °C / 10 s
* Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature
All data refers to 23 °C unless otherwise specied.
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 12 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Soldering conditions according IEC 60058-2-58 and
IPC/JEDEC J-STD-020B
Infrared Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
240 °C
180 °C
130 °C
100 °C
20 - 40 sec Full line: typical
Dotted line: process limits
forced
cooling
Time (s)
Temperature °C
Time (s)
Infrared Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
Temperature °C
Time (s)
Recommended Soldering Conditions
Recommended reflow soldering profile
Resistance to soldering heat - Reflow profile
Temperature °C
Vapor Phase Soldering: Temperature/Time Prole
(Lead and Housing Peak Temperature)
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 13 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
Packing Dimensions in mm
16
10.5 0.3
Tube for THT version
50 relays per tube
2‘000 relays per box
Tape and reel for SMT
version
with long terminals
400 relays per reel
2‘000 relays per box
12
15.5
9
10.5 0.3
Reel dimension
Tape and reel for SMT
version
with short terminals
500 relays per reel
2‘500 relays per box
108-98002 Rev. F
All specications subject to change. Consult Tyco Electronics for latest specications. 14 of 15
Telecom-, Signal and RF Relays
P2 V23079 Relay
AXICOM
IM Relays
4th generation slim line – low prole polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
The IM relay is tested according CECC/IECQ and certied in accordance
with IEC/EN 60950 and UL 60950.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fullls FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric
strength fullls the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fullls the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay with AC coil. The benet is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax +41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752