ITC117PL Integrated Telecom Circuits Relay Blocking Voltage Relay Load Current Relay Max RON Bridge Rectifier Reverse Voltage Darlington Collector Current Darlington Current Gain ITC117PL 350 120 20 Units V mA 100 120 10,000 V mA - Features * Small 16 Pin SOIC Package (PCMCIA Compatible) * Board Space and Cost Savings * 2mW Hookswitch Drive Power (Logic Compatible) * No Moving Parts * 3750VRMS Input/Output Isolation * Full-Wave Bridge Rectifier * Darlington Transistor for Electronic Inductor "Dry" Circuits * Full Wave Current Detector for Ring Signal or Loop Current Detect * Current Limiting * JEDEC Standard Lead Configuration Applications * Data/Fax Modem * Voice Mail Systems * Telephone Sets * Computer Telephony Integration * Set Top Box Modems Description The Integrated Telecom Circuit combines a 1-Form-A solid state relay, bridge rectifier, Darlington transistor and optocoupler into one 16 pin SOIC package, consolidating designs and reducing component count in telecom applications. The relay features the added benefit of current limiting. The ITC117's optocoupler provides for full wave detection of ring signals. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-12 * Certified to: * EN 60950 * EN 41003 * IEC 950 * AS/NZS 3260 Ordering Information Part # Description ITC117PL ITC117PLTR 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) Pin Configuration ITC117PL (N/C) - LED - Form A Relay - LED - Form A Relay (N/C) (N/C) (N/C) Collector - Phototransistor Emitter - Phototransistor 1 16 2 15 PV 3 4 13 5 12 6 11 7 10 ** 8 ** DS-ITC117PL-R1.0 www.clare.com 14 9 Output Form A Output Form A/Bridge Input -/+ Darlington Base Darlington Emitter Bridge Output +/Darlington Collector Bridge Output - LED - Phototransistor -/+ LED - Phototransistor +/- Denotes full-wave detection 1 ITC117PL Absolute Maximum Ratings (@ 25 C) Parameter Total Package Dissipation Isolation Voltage Input to Output Relay Blocking Voltage Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 Min 3750 -40 -40 - Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units 11 W - VRMS 350 V +85 C +125 C +220 C Above 25 derate linerity 8.33mw/C Total Power Dissipation (PD): PD=PHOOKSWITCH + PBRIDGE + PDARLINGTON + PLED PD=(RDS(on)) (I2L) + 2(VF)(IL) + (VCE)(IL) + (VLED)(IF) WHERE: RDS(on) = Maximum realy on resistance IL = Maximum loop current VF = Maximum diode forward voltage VCE = Maximum voltage collector to emitter VLED = Maximum LED forward voltage IF = Maximum LED current Electrical Characteristics Parameter Conditions Relay Portion (Pins 15,16) Output Characteristics @ 25C Load Current (Continuous) On-Resistance IL=120mA Off-State Leakage Current VL=350, TJ=25C Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF=5mA, VL=10V Output Capacitance 50V, f=1MHz Current Limit IF=5mA Relay Portion (Pins 2,3) Input Characteristics @ 25C Input Control Current IL=120mA Input Voltage Drop IF=5mA Reverse Input Voltage Reverse Input Current VR=5V Detector Portion (Pins 7,8) Output Characteristics @ 25C Phototransistor Blocking Voltage IC=10A Phototransistor Dark Current VCE=5V, IF=0mA Saturation Voltage IC=2mA, IF=16mA Current Transfer Ratio IF=6mA, VCE=0.5V Detector Portion (Pins 9,10) Input Characteristics @ 25C Input Control Current IC=2mA, VCE=0.5V Input Voltage Drop IF=5mA Input Current IC=1A, VCE=5V (Detector must be off) 2 Symbol Min Typ Max Units IL RON ILEAK - - 120 20 1 mA A TON TOFF COUT ICL 190 25 235 5 3 280 ms ms pF mA IF VF VR IR 5 0.9 - 1.2 - 50 1.4 5 10 mA V V A BVCEO ICEO VSAT CTR 20 33 50 50 0.3 400 500 0.5 - V A V % IF VF IF 6 0.9 5 2 1.2 25 100 1.4 - mA V A www.clare.com Rev. 1.0 ITC117PL Electrical Characteristics Parameter Bridge Rectifier Electrical Ratings @ 25C Reverse Voltage Forward Drop Voltage Reverse Leakage Current TJ=85C Forward Current (Continuous) Forward Current (Peak) Darlington Electrical Ratings @ 25C Collector-Emitter Voltage Collector-Current Continuous Power Dissipation @ 25C Off-State Collector Emitter Leakage Current DC Current Gain VCE =10VDC Saturation Voltage Total Harmonic Distortion IC=40mA Rev. 1.0 Conditions Symbol Min Typ Max Units IFD=120mA TJ=25C, VR=100V - 50 - 100 1.5 10 140 0.5 V V A t=10mS VRD VFD IRD IFD IFD mA A Ic=10mA DC, IB=0 VC=3.5V - VCEO IC Pd 40 - - 120 500 V mA mW VCE=10V; IB=0mA IC =120mA, ICEX hFE 10,000 - 1 - A IC =120mA fo=300Hz @ -10dBm VCE(SAT) - - - 1.5 -80 V dB www.clare.com 3 ITC117PL PERFORMANCE DATA* 35 Device Count (N) 25 20 15 10 30 20 15 10 5 0 0 1.19 1.21 1.23 20 15 10 0 17.0 1.25 17.4 17.8 18.2 18.6 19.0 365 19.4 20 20 10 5 0 Device Count (N) 20 Device Count (N) 25 15 15 10 5 0.78 0.90 1.02 0.18 0.30 0.42 LED Current (mA) 0.54 0.66 0.78 Percent of Maximum Load Rating (Typical) (%) 20 15 10 5 0 0.88 0.14 0.18 0.22 100 IF = 5mA 75 50 25 0.26 0.30 -40 0 Turn-Off (ms) ITC117PL Typical Blocking Voltage vs. Temperature 415 3.0 410 2.5 Turn-On (ms) 405 400 395 390 25 385 380 50 0 20 40 60 Temperature (C) 80 100 2.28 2.63 2.98 0.10 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 -40 85 -20 0 20 40 60 80 Temperature (C) ITC117PL Typical Turn-On vs. Temperature (Load Current = 120mADC) ITC117PL Typical Turn-Off vs. Temperature (Load Current = 120mA) 100 0.30 0.25 5mA 2.0 10mA 1.5 20mA 1.0 0.20 0.15 0.10 5mA 0.05 0 -20 1.93 Ambient Temperature (C) 0.5 -40 1.58 ITC117PL Typical Leakage vs. Temperature (Measured across Pins 15 & 16) Turn-Off (ms) 0.10 1.23 Turn-On (ms) 0 0.06 5 ITC117PL Load Current vs. Ambient Temperature 25 425 10 LED Current (mA) ITC117PL Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) 415 15 0.90 Leakage (A) 0.66 405 0 0 0.54 395 ITC117PL Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF = 2mADC) ITC117PL Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) 25 0.42 385 Blocking Voltage (V) 25 0.30 375 On-Resistance () ITC117PL Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 120mADC) Device Count (N) 25 5 LED Forward Voltage Drop (V) Device Count (N) 35 25 5 1.17 Blocking Voltage (VRMS) ITC117PL Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 30 30 Device Count (N) ITC117PL Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 120mADC; IF=2mADC) Device Count (N) 35 ITC117PL Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 0 -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 1.0 ITC117PL PERFORMANCE DATA* ITC117PL Typical Turn-On vs. LED Forward Current (Load Current = 120mADC) ITC117PL Typical LED Forward Voltage Drop vs. Temperature 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 10 15 20 25 30 35 40 45 ITC117PL Typical On-Resistance vs. Temperature (Load Current = 120mADC; IF = 5mADC) ITC117PL Typical IF for Switch Operation vs. Temperature (Load Current = 120mADC) LED Current (mA) 30 20 10 0.10 0.08 0 50 1.8 1.8 1.6 1.6 1.4 1.4 1.0 0.8 0 20 40 60 80 0.6 0.4 100 50 0 -50 -20 0 20 60 80 100 -3 -2 -1 0 1 2 3 0.4 7 3.5 3.0 2.5 2.0 1.5 1.0 6 8 10 12 IF (mA) 14 16 18 20 80 100 Operating Area ITC117PL V-I Characteristics for Test Circuit 9 3 2 0 60 10 4 1 40 Temperature (C) 5 0 20 25 30 35 40 45 50 55 60 65 70 75 80 85 10s 100s 6 0.5 0 0.65 0.60 0.55 0.50 VIN (Volts) Normalized CTR (%) 8 4 1s 1.00 0.95 0.90 0.85 0.80 0.75 0.70 ITC117PL Single Transistor Typical Normalized CTR vs. Temperature (VCE = 0.5V) 4.0 2 -20 Time 4.5 0 -40 ITC117PL Package Power Derating 0.6 Load Voltage (V) ITC117PL Single Transistor Typical Normalized CTR vs. Forward Current (VCE = 0.5V) 50 Temperature (C) 0.8 0 10s 100s 1ms 10ms 100ms -150 Normalized CTR (%) 40 0.2 -100 45 0.4 Power Dissipation (Watts) Load Current (A) Load Current (mA) 1.0 40 0.6 ITC117PL Energy Rating Curve 100 35 0.8 Temperature (C) 1.2 30 0 -40 150 25 0.2 Temperature (C) ITC117PL Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 2mADC 20 1.0 0 -20 15 1.2 0.2 -40 10 ITC117PL Typical IF for Switch Dropout vs. Temperature (Load Current = 120mADC) 1.2 0 5 LED Forward Current (mA) LED Forward Current (mA) 40 0.12 0.04 5 Temperature (C) 50 0.14 0.06 0 60 On-Resistance () 0.16 Turn-Off (ms) Turn-On (ms) 1.6 0.18 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 LED Current (mA) LED Forward Voltage Drop (V) 1.8 ITC117PL Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) -40 -20 0 20 40 60 Temperature (C) 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 8 7 6 5 4 20 40 60 80 100 120 IOUT (mA) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1.0 www.clare.com 5 ITC117PL PERFORMANCE DATA* 2.5 16 12 Normalized CTR (%) 14 10 12 IC (mA) 6 4 10 8 6 4 2 0 2 4 6 8 10 12 14 16 18 0 20 1.5 1.0 0.5 0 0 2 4 6 8 ITC117PL Darlington Transistor Typical Normalized CTR vs. Temperature (VCE = 0.8V) 3.0 2.0 5mA 1.5 10mA 1.0 15mA 0.5 20mA 20 40 16 18 0 20 2 4 6 8 60 Temperature (C) 80 100 10 12 14 16 20 18 IF (mA) ITC117PL Typical Transfer Characteristics of Darlington Transistor 120 24 10mA 20 16 5mA 12 8 2mA 1mA 4 0 0 0 14 28 Collector Current (mA) 2mA -20 12 ITC117PL Typical Transfer Characteristics of Single Transistor Detector 1mA 2.5 -40 10 IF (mA) IF (mA) Normalized CTR (%) 2.0 2 0 1 2 3 4 5 6 7 Collector Emitter Voltage 8 9 10 Collector Current (mA) IC (mA) 8 0 ITC117PL Darlington Transistor Typical Normalized CTR vs. Forward Current (VCE = 0.8V) ITC117PL Darlington Transistor Typical Collector Current vs. Forward Current (VCE = 0.5V) ITC117PL Single Transistor Typical Collector Current vs. Forward Current (VCE = 0.5V) 100 Ib = 10A 80 Ib = 8A 60 Ib = 6A 40 Ib = 4A 20 Ib = 2A 0 2 4 6 8 10 Collector Emitter Voltage * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 6 www.clare.com Rev. 1.0 ITC117PL MECHANICAL DIMENSIONS 16 Pin SOIC ("P" Suffix) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.270 TYP. (.050) 7.493 .051 (.295 .002) 7.493 .127 (.295 .005) 1.016 (.040) PC Board Pattern (Top View) 10.160 .051 (.400 .002) 1.270 (.050) 10.363 .127 (.408 .005) 9.728 .051 (.383 .002) .254 (.010) 1.193 (.047) .406 TYP. (.016) 8.890 TYP. (.350) .787 (.031) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) 6.731 MAX. (.265) Top Cover Tape Thickness .102 MAX. (.004) 1.753 .102 (.069 .004) .406 MAX. (.016) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 7.493 .102 (.295 .004) 1 16 10.693 .025 (.421 .001) 12.090 (.476) 3.175 (.125) Top Cover Tape Embossed Carrier Embossment 16.002 .305 (.630 .012) .050R TYP. 11.989 .102 (.472 .004) 10.897 .025 (.429 .001) 1.549 .102 (.061 .004) User Direction of Feed Dimensions mm (inches) Rev. 1.0 www.clare.com 7 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-ITC117PL-R1.0 (c)Copyright 2002, Clare, Inc. All rights reserved. Printed in USA. 6/21/02