SF10AG - SF10JG 1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER Features * * * * * Glass Passivated Die Construction Super-Fast Switching for High Efficiency Surge Overload Rating to 30A Peak B A Low Reverse Leakage Current A Lead Free Finish, RoHS Compliant (Note 4) C Mechanical Data D * * Case: DO-41 * * Moisture Sensitivity: Level 1 per J-STD-020C * * * * Polarity: Cathode Band Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-41 Terminals: Finish - Tin. Plated Leads Solderable per MIL-STD-202, Method 208 e3 Marking: Type Number Ordering Information: See Last Page Dim Min Max A 25.40 3/4 B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Weight: 0.3 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Symbol SF10 AG SF10 BG SF10 CG SF10 DG SF10 FG SF10 GG SF10 HG SF10 JG Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 105 140 210 280 350 420 V Average Rectified Output Current @ TA = 75C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IO 1.0 A IFSM 30 A Forward Voltage VFM Peak Reverse Current at Rated DC Blocking Voltage (Note 5) @ IF = 1.0A @ TA = 25C @ TA = 100C trr Typical Total Capacitance (Note 2) CT Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 1.3 1.5 10 100 IRM Reverse Recovery Time (Note 3) Thermal Resistance Junction to Ambient 0.95 35 V mA 40 75 50 50 ns pF RqJA 75 C/W Tj, TSTG -65 to +150 C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. (See Figure 5) RoHS revision13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect DS24012 Rev. 4 - 2 1 of 3 www.diodes.com SF10AG - SF10JG a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 SF10AGSF10DG 10 SF10FGSF10GG 1.0 SF10HGSF10JG 0.1 o Tj = 25 C 0.01 125 150 175 0.6 200 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 SF10AG - SF10GG CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) TA, AMBIENT TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve 0.8 20 10 SF10HG - SF10JG 10 Tj = 25C f = 1.0MHz 1 0 1 10 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS24012 Rev. 4 - 2 2 of 3 www.diodes.com SF10AG - SF10JG Ordering Information Notes: (Note 6) Device Packaging Shipping SF10AG-A DO-41 5K/Ammo Pack SF10AG-B DO-41 1K/Bulk SF10AG-T DO-41 5K/Tape & Reel, 13-inch SF10BG-A DO-41 5K/Ammo Pack SF10BG-B DO-41 1K/Bulk SF10BG-T DO-41 5K/Tape & Reel, 13-inch SF10CG-A DO-41 5K/Ammo Pack SF10CG-B DO-41 1K/Bulk SF10CG-T DO-41 5K/Tape & Reel, 13-inch SF10DG-A DO-41 5K/Ammo Pack SF10DG-B DO-41 1K/Bulk SF10DG-T DO-41 5K/Tape & Reel, 13-inch SF10FG-A DO-41 5K/Ammo Pack SF10FG-B DO-41 1K/Bulk SF10FG-T DO-41 5K/Tape & Reel, 13-inch SF10GG-A DO-41 5K/Ammo Pack SF10GG-B DO-41 1K/Bulk SF10GG-T DO-41 5K/Tape & Reel, 13-inch SF10HG-A DO-41 5K/Ammo Pack SF10HG-B DO-41 1K/Bulk SF10HG-T DO-41 5K/Tape & Reel, 13-inch SF10JG-A DO-41 5K/Ammo Pack SF10JG-B DO-41 1K/Bulk SF10JG-T DO-41 5K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS24012 Rev. 4 - 2 3 of 3 www.diodes.com SF10AG - SF10JG