e3
DS24012 Rev. 4 - 2 1 of 3 SF10AG - SF10JG
www.diodes.com ã Diodes Incorporated
SF10AG - SF10JG
1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER
Features
AA
B
C
D
DO-41
Dim Min Max
A25.40 ¾
B4.06 5.21
C0.71 0.864
D2.00 2.72
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
·Glass Passivated Die Construction
·Super-Fast Switching for High Efficiency
·Surge Overload Rating to 30A Peak
·Low Reverse Leakage Current
·Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
·Case: DO-41
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish - Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
·Polarity: Cathode Band
·Marking: Type Number
·Ordering Information: See Last Page
·Weight: 0.3 grams (approximate)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic SymbolSF10
AG
SF10
BG
SF10
CG
SF10
DG
SF10
FG
SF10
GG
SF10
HG
SF10
JG Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
VRRM
VRWM
VR
50 100 150 200 300 400 500 600 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 350 420 V
Average Rectified Output Current @ TA = 75°C
(Note 1) IO1.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load IFSM 30 A
Forward Voltage @ IF = 1.0A VFM 0.95 1.3 1.5 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage (Note 5) @ TA = 100°CIRM 10
100 mA
Reverse Recovery Time (Note 3) trr 35 40 50 ns
Typical Total Capacitance (Note 2) CT75 50 pF
Thermal Resistance Junction to Ambient RqJA 75 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. (See Figure 5)
4. RoHS revision13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect
DS24012 Rev. 4 - 2 2 of 3 SF10AG - SF10JG
www.diodes.com
I , PEAK FORWARD SURGE CURRENT (A)
FSM
0
10
20
30
1 10 100
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
1
10
100
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
R
Fig. 4 Typical Total Capacitance
T = 25°C
j
f = 1.0MHz
SF10HG - SF10JG
SF10AG - SF10GG
0
0.2
0.4
0.6
0.8
1.0
25 50 75 100 125 150 175 200
I , AVERAGE FORWARD RECTIFIED
(AV)
CURRENT (A)
T , AMBIENT TEMPERATURE ( C)
A
Fig. 1 Forward Current Derating Curve
°
Single phase half-wave
60Hz resistive or inductive load
0.01
0.1
1.0
10
0.6 0.8 1.0 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
Fig. 2 Typical Forward Characteristics
1.6 1.8 2.0
SF10HG-
SF10JG
o
T = 25 C
j
SF10FG-
SF10GG
SF10AG-
SF10DG
50V DC
Approx
Oscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
trr
Set time base for 50/100 ns/cm
+0.5A
0A
-0.25A
-1.0A
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
DS24012 Rev. 4 - 2 3 of 3 SF10AG - SF10JG
www.diodes.com
Ordering Information
Device Packaging Shipping
SF10AG-A DO-41 5K/Ammo Pack
SF10AG-B DO-41 1K/Bulk
SF10AG-T DO-41 5K/Tape & Reel, 13-inch
SF10BG-A DO-41 5K/Ammo Pack
SF10BG-B DO-41 1K/Bulk
SF10BG-T DO-41 5K/Tape & Reel, 13-inch
SF10CG-A DO-41 5K/Ammo Pack
SF10CG-B DO-41 1K/Bulk
SF10CG-T DO-41 5K/Tape & Reel, 13-inch
SF10DG-A DO-41 5K/Ammo Pack
SF10DG-B DO-41 1K/Bulk
SF10DG-T DO-41 5K/Tape & Reel, 13-inch
SF10FG-A DO-41 5K/Ammo Pack
SF10FG-B DO-41 1K/Bulk
SF10FG-T DO-41 5K/Tape & Reel, 13-inch
SF10GG-A DO-41 5K/Ammo Pack
SF10GG-B DO-41 1K/Bulk
SF10GG-T DO-41 5K/Tape & Reel, 13-inch
SF10HG-A DO-41 5K/Ammo Pack
SF10HG-B DO-41 1K/Bulk
SF10HG-T DO-41 5K/Tape & Reel, 13-inch
SF10JG-A DO-41 5K/Ammo Pack
SF10JG-B DO-41 1K/Bulk
SF10JG-T DO-41 5K/Tape & Reel, 13-inch
Notes: 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.
(Note 6)
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
