45
PCB Power Relay – G5NB-E
Power Relays
Ordering Information
A Miniature Relay with 1-pole 5 A
Switching Capability and 10 kV
Impulse Withstand Voltage
■ ROHS compliant.
■ Highly efficient magnetic circuit for high
sensitivity (200 mW).
■ Compact, slim, yet provides 10 kV impulse
withstand voltage (between coil and contacts).
■ Standard model conforms to UL, CSA and EN
standards.
■ Tracking resistance: CTI>250
RC
Classification Contact form Enclosure ratings Model
Standard SPST-NO Flux protection G5NB-1A
Rated coil voltage
Note: When ordering, add the rated coil voltage to the model number.
Example: G5NB-1A-E 12 VDC
Model Number Legend
1. Number of Poles 3. Rated Coil Voltage
1: 1 pole 5, 12, 18, 24 VDC
2. Contact Form
A: SPST-NO
Water heaters, refrigerators, air conditioners, and small electric
appliances
Application Examples
Omron A5 Catalogue 2007 1-282 11/9/06 10:16 am Page 45
46
PCB Power Relay – G5NB-E
Rated voltage 5 VDC 12 VDC 18 VDC 24 VDC
Rated current 40.0 mA 16.7 mA 11.1 mA 8.3 mA
Coil resistance 125 Ω720 Ω1,620 Ω2,880 Ω
Must operate voltage 75% max. of rated voltage
Must release voltage 10% min. of rated voltage
Max. voltage 170% of rated voltage (at 23°C)
Power consumption Approx. 200 mW
Note: The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
The operating characteristics are measured at a coil temperature of 23°C.
The “Max. voltage” is the maximum voltage that can be applied to the relay coil.
Specifications
■ Coil Ratings
■ Contact Ratings
Load Resistive load (cosϕ= 1)
Rated load 5 A at 250 VAC, 3 A at 30 VDC
Contact material AgNi
Max. switching voltage 250 VAC, 30 VDC
Max. switching current 5 A
Max. switching power 1250 VA, 90 W
Failure rate (reference value) 10 mA at 5 VDC
Note: P level: λ60 = 0.1 x 10-6/operation (with an operating frequency of 120 operations/min)
■ Characteristics
Contact resistance (See note 2.) 100 mΩmax.
Operate time 10 ms max.
Release time 10 ms max.
Insulation resistance (See note 3.) 1,000 MΩmin. (at 500 VDC)
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts
750 VAC, 50/60 Hz for 1 min between contacts of same polarity
Impulse withstand voltage 10,000 V (1.2 x 50 ms) between coil and contacts
Creepage (Typ) 7.2 mm
Clearance (Typ) 7.1 mm
Tracking Resistance CTI) 250 V
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance Destruction: 1,000 m/s2
Malfunction: 100 m/s2
Endurance Mechanical: 5,000,000 operations min.
Electrical: 100,000 operations min (5 A at 250 VAC), 200,000 operations min. (3 A at 30 VDC)
Failure rate P level 5 VDC, 10 mA
(reference value) (See note 4.)
Ambient temperature Operating: -40˚C to 85˚C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 4 g
Note: 1. The data shown above are initial value.
2. Measurement conditions: 5 VDC, 1 A, voltage drop method.
3. Measurement conditions: Measured at the same points as the dielectric strength using a 500-VDC ohmmeter.
4. This value is for a switching frequency of 120 operations/minute.
Insulation
Distance
Omron A5 Catalogue 2007 1-282 11/9/06 10:17 am Page 46
47
PCB Power Relay – G5NB-E
Power Relays
■ Approved Standards
UL508 (File No. 41515)
Coil ratings Contact ratings
5 to 24 VDC 5 A, 30 VDC (resistive)
5 A, 125 VAC (resistive)
5 A, 250 VAC (general use)
CSA C22.2 (No. 0, No. 1, No. 14) (File No. LR31928)
■ Actual Load Life (Reference Values)
Coil ratings Contact ratings
5 to 24 VDC 5 A, 30 VDC (resistive)
5 A, 125 VAC (resistive)
5 A, 250 VAC (general use)
EN 61810-1 (VDE Reg No 137575)
Coil ratings Contact ratings
5 to 24VDC 5 A, 30 VDC (resistive)
5 A, 250 VAC (general use)
1. 120-VAC motor and lamp load (2.5-A surge and 0.5-A normal): 250,000 operations min.(at 23°C)
2. 160-VDC valve load (with varistor) (0.24-A): 250,000 operations min.(at 23°C)
Omron A5 Catalogue 2007 1-282 11/9/06 10:17 am Page 47
48
PCB Power Relay – G5NB-E
ALL DIMENSIONS SHOWN ARE IN MILLIMETRES.
To convert millimetres into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
■ Correct Use
Contact voltage (V)
10
1 10 30 100 250 1,000
DC resistive
load
AC resistive
load
Contact
resistance
Maximum Switching Capacity
Contact current (A)
100
50
30
10
5
3
1
01234
250 VAC, 30 VDC resistive load
Endurance
Contact current (A)
No. of operations (x 10
4
)
5
3
1
0.1
Precautions
HANDLING
The enclosure rating of the G5NB is for flux protection. Do not use
immersion-cleaning.
Dimensions
Note: All units are in millimetres unless otherwise indicated.
PCB Mounting Holes
(Bottom View)
Tolerance: ±0.1 mm
Terminal Arrangement/
Internal Connections
(Bottom View)
7.2 max.
(7.0)*
Four, 1.1 dia.
(No coil polarity)
*Average value
15. 3 max.
(15.0)*
3.4
0.4
11.5 7
0.27 0.33
20.5 max.
(20.4)*
G5NB-1A-E
Engineering Data
Ambient Temperature vs. Maximum Coil Voltage
Maximum coil voltage (%)
Ambient temperature (°C)
Test item:G5NB-1A-E, 24 VDC
Quantity tested: 5
No current
3-A current
Z
Z
Z'
Z'
Shock direction
Unit: m/s2
Y
Y
Y'
Y'
X
X
X'
X'
1,000
1,000
1,000 1,000
1,000 1,000
Excited
Not excited
700
125
Malfunctioning Shock
G5NB-1A
Quantity Tested: 5 units
Test Method: Shock was applied 3
times in 6 directions along 3 axes
and the level at which shock caused
malfunction was measured.
Rating: 100 m/s2
Uncon-
firmed
area
CAT. No. JI43-E2-02-X
Omron A5 Catalogue 2007 1-282 11/9/06 10:17 am Page 48
