WRITTEN APPROVAL OF BEL FUSE INC. THE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE LED POLARITY PIN 11 | PIN 10 PIN 12 - + COLOR GREEN LED + = [YELLOW W y SCHEMATIC FOR SINGLE PORT ELECTRICAL CHARACTERISTICS @ 25C 7 TURNS RATIO / TPL 1CT + 1CT +2% GREEN 12 Z RJ45 1CT + 1CT TPe 1CT + 1CT 42% YELLOW 10 TP3 1cT + 1CT +2% TRDI+ 1 +4 RJ1 TRP1+ TP4 ICT + 1CT 42% OCL @ 100kHz/100mVRMS +RDI- 2 Je TRPL- 8mA DC BIAS 350uH MIN, INS. LOSS TRD2+ 3 RJ3 TRP2+ O.1MHz TO 1MHz -11 dB MAX 1MHz TO 65MHz -0.5 dB MAX 65MHz TO 100MHz -0,8 dB MAX TRD2- 4 RJ6 TRP2- 100MHz TO 125MHz -12 dB MAX RET, LOSS MIND TRD3+ 5 o|/RJ4 TRP3+ 0.SMHz-40MHz -18 dB Sle Las fp 40MHz-100MHz -12+20LUGF/80MHz) oB TRD3 6 coe L les Tees CM TO CM REJ 100kKHz - 100MHz -30 oB MIN TRD4t 7 1CT + ICT lej7 TRP4+ CM TO DM REJ bie kaart 100kHz - 100MHz -35 dB MIN a HIPOT (Isolation Voltage): 1500 Vrms TRD4- 8 >/RJ8 TRP4- LED TRDCT VF <FORWARD VOLTAGE? IF=20mA YELLOW GREEN 22V TYP. yyayaz4 2) 4X 75 OHMS YELLOW 21V TYP, AD <DOMINANT WAVELENGTH? IF=20mA YELLOW GREEN 565nm TYP, YELLOW 590nm TYP, 2@KVDC 1000pF NOTES: SCHEMATIC & ELECTRICAL CHARACTERISTICS ARE IDENTICAL FOR PORT 1 & PORT 2. SHIELD 7777" STANDARD DIM. [ ] METRIC DIM. AS REFERENCE DRYN DATE 03-16-05 TITLE 5, gigabit Maguack PART NO. 7, DRAWING NO. th ININCH | unrr : INCH [mm]| REV. : A bel CHKD DATE with LED> TILE NAME Xx SCALE: N/A SIZE : Ad | comontursioin CHUNG 03-16-05 0843-2C1T-33-F 08432C1T33-FA.DWG XXX 46)--=-= | pace: 2 mANET/ FORM NO. - ENG02082001 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN I$ CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. NOTES: PLASTIC HOUSING: CONTACT PLATING: OUTPUT PINS: METAL SHIELD: eWkus UL RECOGNIZED - FILE #196366 AND 169987. 0125 [3.18] SIGNAL LED LEADS - fo t- 0.660 [16.76] MAX. LED FOR PORT 2 / BI-COLOR YELLOW/GREEN . & & c= PORT 2 =}; 1.350 [34.29] NOTE [7] DUTER a [ SHIELD 3 LED FOR PORT 1 OU BI-COLOR y 1 oF YELLOW/GREEN aI 4 on, @%3 PORT 1 P o Nnwe 3H 20s Ca 70S u b <a | u D oOo i a _l + 4 {ae Witty) 4 COUT TU 0.130 3.30) f Lt ; 7 0.425 [10,79] 0.900 Cle.70] M 0.296 [7.52] i- 0.865 [21,97] THERMOPLASTIC PBT FLAMMABILITY RATING UL 94V-0 30 MICRO-INCH HARD GOLD PLATING TIN-COATED COPPER WIRE, DIA 0.018 INCH. NICKEL OR TIN PLATED ON COPPER ALLOY, (NICKEL GROUND LEADS ARE SOLDER DIPPED) JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F. MARK PART WITH MFG LOGO, MFG NAME, PART NUMBER, AND DATE CODE. 3. RoHS COMPLIANCE, PER EU DIRECTIVE 2002/95/EC, p- 0.442 (11.23) -- 0.652 [16.56] STANDARD DIM. [ ] METRIC DIM. AS REFERENCE bel DRWN DATE TITLE ' ' PART NO. / DRAWING NO. TOL. IN INCH UNIT : INCH REV.: A QIN 03-16-05 2X1 gigabit MagJack 08432C1T33-F x [rom] CHED DATE (with LED) FILE NAME x SCALE: N/A SIZE : Ad | componers <i BILL/KEUNG 03-16-05 0843-2C1T-33-F 08432C1T33-FA.DWG xxx | soo | @--==}+ fpace: 3 | ny FORM NO. EN 1 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. LED CONFIGURATION COMMON 11 ty GREEN 1e YELLOW 10 PORT 1 PORT 2 1eNt 10 | 10 it/le @\ G10 8/8 6X 60.038 [40.97] 40.035 (40,89) TYPICAL 4x 00.062 [41.57] 0.865 [21.97] 0.690 TRD 1+ QO 99:90 @ TRD 1- 8 57/7098 TRD 2+ TRD 2- 40.128 [43.25] a ! a 40 5| o4 TRD 3+ 2 PLACES 03'130 TRD 3- oilte TRD 4+ TRD 4- SD] CO} J) OS) OT) 1G 1p | TRDCT 1/2/3/4 YELLOW LED CATHODE COMMON ANODE O GREEN LED CATHODE oO oO PIN-OUT_ INFORMATION (COMPONENT SIDE VIEW) | 0.010 [0,25] | 0.100 [2.54] _ 0.290 [7.37] 0.100 2.54] 0.690 [17.53] 0.100 [2.54] Re oeee 0.100 [2.54] of 8 EF{ rf 0.346 [8.79] a ee 8 0.296 [7.52] Ble if BS | o 0 rt t 0.120 [3.05] 0.170 [4.32] 0.330 [8.38] 0.380 [9,65] Q.500 (12.70) i 0.635 [16.13] SUGGESTED FOOTPRINT CCOMPONENT SIDE VIEW) oHS 2002/95/EC, STANDARD DIM. [ ] METRIC DIM. AS REFERENCE J DRWN DATE TITLE , \ PART NO. / DRAWING NO. TOL. IN INCH UNIT : INCH REV. : A b QIN 03-16-05 2X1 gigabit MagJack 08432C1T33-F x mma] el CHKD DATE (with LED FILE NAME Xx SCALE: N/A |SIZE : A4 | comommndi, BILL/KEUNG 03-16-05 0843-eC1T-33-F 08432C1T33-FA.DWG xxx | 0010 @--=- pace: 4 | TY FORM NO. - ENG02082001 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. SUGGESTED PANEL OPENING METAL PANEL 0.690 [17,53] [~ 0.081 [2.06] \ a METAL PANEL a aN J L 2) 1070 [27.18] a A, Tv Wirt XO > /f t PCB PCB \ SUGGE A, ? STED PANEL OPENING X ) NOTE: THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY. PACKING INFORMATION PACKING TRAY: 0200-0148-36 <TOP? 0200-0148-34 BOTTOM> PACKING QUANTITY: 40 PCS FINISHED GOODS PER TRAY 6 TRAYS (240 PCS FINISHED GOODS> PER CARTON BUDX. NOTE: CARDBOARD ARE PLACED BETWEEN LAYERS OF PACKING TRAY INSIDE CARTON BOX. CINCLUDE THE UPPERMOST AND LOWEREST TRAY) STANDARD DIM. [ ] METRIC DIM. AS REFERENCE J DRWN DATE TITLE , \ PART NO. / DRAWING NO. TOL. IN INCH UNIT : INCH REV. : A b QIN 03-16-05 2X1 gigabit MagJack 08432C1T33-F x mma] el CHKD DATE (with LED? FILE NAME xx SCALE: N/A [SIZE : A | comomuis BILL/KEUNG 03-16-05 0843-eC1T-33-F 08432C1T33-FA.DWG xxx | 20005 | @--=-t+ pack: 5 | TY FORM NO. - ENG02082001 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. NOTES: dooloo by) \ 4 8 | ge e| o | o oO O 2 | ee eo, | 0.440 [11,18] aN" 1.230 [31.24] 0.425 [10.80] 0.580 [14,73] | | =f 0,100 C254] = =0,700 [17.78] SHIELD COVER AREA IN PCB THE SHADED AREA ON THE CUSTOMER BOARD ARE RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR COMPONENT PAD. oH 2002/88/EC, DRWN DATE QIN 03-16-05 CHKD DATE BILL/KEUNG 03-16-05 TITLE 2X1 gigabit MagJack Cwith LED) 0843-2C1T-33-F STANDARD DIM. [ ] METRIC DIM. AS REFERENCE PART NO. / DRAWING NO. TOL. IN INCH UNIT : INCH REV. : A 08432C1T33-F x [mm] FILE NAME Xx SCALE: N/A SIZE: A4 08432C1T33-FA.DWG XxX | 40.004 46 } | pace: 6 bel conmonnnsiod, CONNECTED PLANET(/ FORM NO. - ENG02082001 This document is electronically generated. This is a controlled copy if used internally