Model 6733, 6734 Test Lead Wire with Silicone or PVC Insulation Features Same wire as used with the Pomona test leads and patch cords. Make your own "Extra Long" test leads, jumpers or patch cords. Fits Pomona "Do-It-Yourself" banana plugs and jacks. High temperature and voltage ratings. Silicone insulation with high wire strand count allows for superb flexibility. Wear indication with double insulated (dual extruded) silicone leads shows white inner layer for increased safety. Wire will comply with International Safety Standard CAT III, IEC61010-031 requirements when correctly terminated with other components designed to meet CAT III, IEC61010-031 requirements. Specifications: Insulation: Length: Wire size: Wire: Diameter (OD): Temperature: Wire Rated Voltage: Current: 6733 6734 Silicone 50 FT (15,2 meters) 18 AWG 192 X 41 bare copper .144" (3,60mm) -58 to +302F (-50 to +150C) 10,000 DC * 20 A PVC 50 FT (15,2 meters) 18 AWG 65 X 36 tinned copper .144" (3,60mm) -4 to +221F (-20 to +105C) 5,000 DC * 15 A 6733-0 6733-2 6734-0 6734-2 Ordering Information: Black Wire: Red Wire: * Hands free testing in controlled voltage environment: For CE compliance: not intended for hand held use at voltages above 30 Vrms /42.2 Vpk / 60 Vdc or when current exceeds 8A maximum. USA: Sales: 800-490-2361 Technical Support: technicalsupport@pomonatest.com Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = .02" (,51 mm), .xxx = .005" (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright (c) 2012 D1100092 Rev. 101 Page 1 of 1