DSSK 10-018A IFAV = 2x5 A VRRM = 180 V VF = 0.62 V Power Schottky Rectifier with common cathode Preliminary Data VRSM VRRM V V 180 180 TO-220 AB Type A DSSK 10-018A C A A C A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV IFAV TC = 165C; rectangular, d = 0.5 TC = 165C; rectangular, d = 0.5; per device IFSM 35 5 10 A A A TVJ = 45C; tp = 10 ms (50 Hz), sine 120 A EAS IAS = tbd A; L = 180 H; TVJ = 25C; non repetitive tbd mJ IAR VA =1.5 * VRRM typ.; f=10 kHz; repetitive tbd A tbd V/ms (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25C Md mounting torque Weight typical Symbol Conditions IR VF -55...+175 175 -55...+150 C C C 90 W 0.4...0.6 2 g Characteristic Values typ. max. TVJ = 25C VR = VRRM TVJ = 100C VR = VRRM IF = 5 A; IF = 5 A; IF = 10 A; Nm TVJ = 125C TVJ = 25C TVJ = 125C RthJC RthCH 0.3 2.5 mA mA 0.62 0.78 0.68 V V V 1.7 K/W K/W 0.5 Features * International standard package * Very low VF * Extremely low switching losses * Low IRM-values * Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2000 IXYS All rights reserved 007 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-2 http://store.iiic.cc/ DSSK 10-018A 100 1000 10 mA T =175C VJ A IR IF pF 1 CT 150C 0.1 125C 10 TVJ = 175C 125C 25C 100 100C 0.01 75C 0.001 50C 25C 1 0.0 TVJ= 25C 10 0.0001 0.2 0.4 0.6 0.8 1.0 V 1.2 VF Fig. 1 Maximum forward voltage drop characteristics 0 50 Fig. 2 Typ. value of reverse current IR versus reverse voltage VR 40 A 35 P(AV) d=0.5 DC 50 100 150 V 200 VR Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 10000 35 W 30 30 IF(AV) 0 150 V 200 VR 100 A IFSM 25 25 20 d= DC 0.5 0.33 0.25 0.17 0.08 20 15 15 10 10 1000 5 5 0 0 0 40 80 120 TC 160 C Fig. 4 Average forward current IF(AV) versus case temperature TC 0 5 10 15 20 25 IF(AV) 30 A 100 10 100 1000 s 10000 tP Fig. 5 Forward power loss characteristics 2 1 K/W ZthJC D=0.5 0.33 0.25 0.17 0.08 Single Pulse 0.1 0.01 0.0001 DSSK 10-018A 0.001 0.01 0.1 1 s 10 t Note: All curves are per diode 007 Fig. 6 Transient thermal impedance junction to case at various duty cycles (c) 2000 IXYS All rights reserved 2-2 http://store.iiic.cc/