Click on Series name for product info on aimtec.com Series AM1SS-N(J)Z 1 Watt | DC-DC Converter FEATURES: * * * * * * * * Unregulated 4 Pin SIP Package Low ripple and noise High efficiency up to 82% Operating temperature -40oC to +105oC Input / Output isolation 1500 VDC Pin compatible with multiple manufacturers Continuous Short Circuit Protection Models Single output Model AM1SS-0303S-NZ * AM1SS-0305S-NZ AM1SS-0312S-NZ AM1SS-0503S-NZ* AM1SS-0503SJZ* AM1SS-0505S-NZ AM1SS-0505SJZ* AM1SS-0509S-NZ AM1SS-0509SJZ* AM1SS-0512S-NZ AM1SS-0512SJZ* AM1SS-0515S-NZ AM1SS-0515SJZ* AM1SS-0524S-NZ AM1SS-0524SJZ* AM1SS-1203S-NZ* AM1SS-1205S-NZ AM1SS-1209S-NZ AM1SS-1212S-NZ AM1SS-1215S-NZ AM1SS-1224S-NZ AM1SS-1515S-NZ* AM1SS-2403S-NZ * AM1SS-2405S-NZ AM1SS-2409S-NZ AM1SS-2412S-NZ AM1SS-2415S-NZ AM1SS-2424S-NZ Input Voltage (VDC) Output Voltage (VDC) Output Current max (mA) Isolation (VDC) Max. Capacitive Load (F) Efficiency (%) 2.97-3.63 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 12 3.3 3.3 5 5 9 9 12 12 15 15 24 24 3.3 5 9 12 15 24 15 3.3 5 9 12 15 24 303 200 84 303 303 200 200 111 111 84 84 67 67 42 42 303 200 110 83 67 42 67 303 200 110 83 67 42 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 220 220 220 220 2400 220 2400 220 1000 220 560 220 560 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 72 76 80 72 74 80 82 80 83 81 83 81 83 81 85 72 80 80 81 80 80 81 72 80 80 81 82 82 With Momentary short circuit protection of 1 second Input Specifications Parameters Voltage range Absolute Max Rating (1 sec. max.) www.aimtec.com F 051e R11.F REV: 05/19/A Conditions Typical Nominal 3.3V input Nominal 5 input Nominal 12 input Nominal 15 input Nominal 24 input 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Nominal 3.3 input Nominal 5 input Nominal 12 input Nominal 15 input Nominal 24 input Maximum VDC 5 9 18 21 30 Tel: +1 514 620 2722 1 of 5 Units VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1SS-N(J)Z 1 Watt | DC-DC Converter 3.3V output models with suffix NZ 5V output models with suffix NZ 12V output models with suffix NZ 15V output models with suffix NZ 24V output models with suffix NZ 3.3V/5V output models with suffix JZ 9V/12V output models with suffix JZ 15V/24V output models with suffix JZ 30 70 20 60 15 50 10 35 Input no load current 17 30 5 10 12 20 18 30 Reflected Ripple Current 15 Filter Capacitor Hot Plug Unavailable Note: Reflected ripple current testing method please see DC-DC Converter Application Notes for specific operation. mA mA Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Rated Units 1500 VDC MOhm pF Maximum Units 60 sec > 1000 20 Output Specifications Parameters Voltage accuracy Short Circuit protection Line voltage regulation Load voltage regulation Temperature coefficient Temperature coefficient (for part number with suffix JZ) Ripple & Noise Ripple & Noise (for part number with suffix JZ) Conditions Typical See tolerance graph 5 For 1.0% Vin, 3.3V Model For 1.0% Vin, Other Model 3.3V output 5V output 10 - 100% load for 9V output parts with suffix NZ 12V output 15V output 24V output 3.3V output 5V output 10 - 100% load for 9V output parts with suffix JZ 12V output 15V output 24V output % Continuous, unless marked with 1.5 % of Vin 1.2 18 12 8 7 6 5 15 10 8 7 6 5 0.03 20 15 10 10 10 10 %/oC %/oC 0.02 At 20 MHz Bandwidth Other Model At 20 MHz Bandwidth 24V Model % 60 30 50 150 75 100 mV p-p mV p-p General Specifications Parameters Switching frequency Switching frequency (for part number with suffix JZ) Operating temperature Storage temperature Maximum case temperature Cooling Humidity Soldering Lead Temperature Case material Weight www.aimtec.com F 051e R11.F REV: 05/19/A Conditions Typical 100% load 100-300 KHz 270 KHz 100% load Derating Above 85oC Maximum Units oC -40 to +105 -55 to +125 oC 125 oC 95 300 oC Free air convection Non condensing 1.5mm from Lead, for 10 Sec Plastic UL94-V0 1.3 Tel: +1 514 620 2722 2 of 5 % g Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1SS-N(J)Z 1 Watt | DC-DC Converter Dimensions (L x H x W) 0.46 x 0.4x 0.24 inches 11.60 x 10.16 x 6.00 mm MTBF >3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency approvals cULus Standards Information technology Equipment Pin Out Specifications Single 1 2 3 4 - V Input +V Input -V Output +V Output Dimensions for part number with suffix JZ 6.00 (0.24) 11.60 (0.46) 10.16 (0.40) Pin UL 60950-1 (except the models marked with *) Design to meet UL 62368 (for part number with suffix JZ) Printed Front AM1SS-XXXXS-NZ AM1SS-XXXXSJZ 4.10 (0.161) 0.50 (0.02) XXXX 7.62 (0.30) 0.50 (0.02) 0.30 (0.02) 0.90 (0.04) 2.45 (0.10) Typical Application Circuit Capacitor selection Table Single Vin C1 VDC 3.3 4.7 F 3.3 V 5 4.7 F 5V 12 2.2F 9V 15 2.2F 12 V 24 1F 15 V 24V 9V for part number with suffix JZ 24 V www.aimtec.com F 051e R11.F REV: 05/19/A DC-DC Convertor C2 Vin+ 10 F 10F 4.7 F 2.2F 1F 0.47 F 2.2 F 1F Vo+ C2 C1 VinVo- Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1SS-N(J)Z 1 Watt | DC-DC Converter Derating Free Air Convection 85 C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 20 - 40 0 20 40 60 80 105 85 100 Ambient Temperature C Typical Characteristics AM1SS-0503SJZ Other Model 10 % 12% Typic al loa d 5% 5% Rated Output Voltage Rated Output Voltage line +2.5 % -2.5 % Output Voltage Accuracy% Output Voltage Accuracy% +2% -5% -12% -7.5 % 70 % 10 % 50 % 100 % 50 % 10 % 100 % Output Current % (Nominal Input) Output Current% (Nominal Input) Recommended Circuit for EMI Class B Vin+ Vin+ 4.7 F 50V Vin- www.aimtec.com F 051e R11.F REV: 05/19/A Vo+ Aimtec DC/DC Converter Vin- Load 6.8H Vo- Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1SS-N(J)Z 1 Watt | DC-DC Converter Recommended Circuit for EMI Class B (for part numbers with suffix JZ) Vin+ 4.7 F 25V 4.7 F 25V Vo+ Aimtec DC/DC Converter Vin- C1 Load Vin+ 6.8H Vo- Vin- CY1 Single VDC 3.3 V 5V 9V 12 V 15 V 24V C1 10 F 2.2F 1F CY1 N/C 1nF / 4KVDC VISHAY HGZ102MBP TDK CD45-E2GA102M-GKA NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.F REV: 05/19/A Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only