Mar 25, 2013 ©2013 Integrated Device Technology, Inc
100.00 MHz Ultra-Low Jitter Oscillator
Plus-PPM Margining MEMS Oscillator (LVPECL)
ADVANCE DATASHEET
4HF100000Z3
Features
Nominal Frequency: 100.00 MHz (LVPECL)
Any Freq Tuning (±1000 ppm): 99.900 to 100.100 MHz
RMS phase jitter: 0.1 ps typical
Frequency Stability: ±25 / ±50 ppm
Standard Packages: 7050 / 5032 / 3225
Internal MEMS Resonator No external XTAL or XO required
7.0 x 5.0 mm package shown
(also available in 5.0 x 3.2 and 3.2 x 2.5 mm)
The 4HF100000Z3 is an ultra-low Phase Jitter (100 fs) oscillator capable of up to ± 1000 ppm of real time frequency margining in one
ppm steps. It is ideal for applications requiring extremely low jitter and/or Plus-PPM clocking. Any frequency from 99.900 to
100.100 MHz can be generated in real time without any external XTAL or XO.
Block Diagram Pin Description
Pin #
Name
OE
1*
FM
2*
ME#
3
GND
4
OUT+
5
OUT–
6
VDD
* Pulled high internally
Plus-PPM Margining & Real Time Frequency Tuning (± 1000 ppm)
Part Ordering Information Typical Phase Jitter
Ordering Code
Package
(mm)
Voltage
(V)
± 50 ppm
± 25 ppm
3.3
4HF100000Z3AACUGI
4HF100000Z3ABCUGI
7.0 x 5.0
2.5
4HF100000Z3BACUGI
4HF100000Z3BBCUGI
3.3
4HF100000Z3AACTGI
4HF100000Z3ABCTGI
5.0 x 3.2
2.5
4HF100000Z3BACTGI
4HF100000Z3BBCTGI
3.2 x 2.5
2.5
4HF100000Z3BACXGI
4HF100000Z3BBCXGI
* Factory minimum order quantity: 500pcs (T/R)
ME#
OUTPUT
OE/FM
Normal Mode (OE) Plus-PPM Margining Mode (FM) Normal Mode (OE)
Inc Mode
Enter
Dec Mode Exit
ME#
OUTPUT
OE/FM
Normal Mode (OE) Plus-PPM Margining Mode (FM) Normal Mode (OE)
Inc Mode
Enter
Dec Mode Exit
MEMSMEMS
Output
VDD OUT- OUT+
IDT
MEMS
ASIC
OE/FM ME# GND
1 0 0 0 0 0
CXG: 3.2 x 2.5
CTG: 5.0 x 3.2
CUG: 7.0 x 5.0
Package
C U G
4 H F
100.000 MHz
Frequency
A
A: 3.3 V
B: 2.5 V
Voltage
8
Blank: Tubes
8: T/R
Shipping
I
Z 3
Temperature
I: -40 to 85°C
A
A: ±50 ppm
B: ±25 ppm
Stability
0.12 ps
6024 Silver Creek Valley Road
San Jose, California 95138
Sales
800-345-7015 (inside USA)
+1 408-284-8200 (outside USA)
Technical Support
MEMS_Support@idt.com
www.idt.com/go/MEMS
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including
descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform
the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any
particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any
third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT
product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.
Copyright 2010, 2011, 2012, 2013. All rights reserved.
Mar 25, 2013 www.IDT.com ©2013 Integrated Device Technology, Inc
100.00 MHz Ultra-Low Jitter Oscillator
4HF100000Z3 Datasheet
Specification
2.5 V
Specifications
3.3 V
Specifications
Parameter
Min
Typ
Max
Min
Typ
Max
Units
Conditions
Supply Voltage (VDD)
2.375
2.50
2.625
2.97
3.30
3.63
V
Output Frequency
100.00
100.00
MHz
Frequency Stability
- 50
+ 50
- 50
+ 50
ppm
Includes supply voltage and temperature variation (-40 to 85°C),
reflow drift, and aging.
Supply Current
90
95
mA
No load
Enable/Disable Time
1
1
us
Guaranteed by design
Input HIGH/LOW level
0. 7VDD
0.3VDD
0. 7VDD
0.3VDD
V
At OE pin
Output LOW level
0.8
VDD -1.8
1.5
VDD -1.8
V
Output HIGH level
VDD -1.0
1.6
VDD -1.1
2.3
V
Amplitude (VA )
0.75
0.75
V
Single Ended output swing (Pk-Pk)
Mid Level (VM)
VDD -1.3
VDD -1.3
V
Rise/Fall Time (TR)
300
250
ps
Maximum; 20/80% of VA; Output load (CL) = 2pF; Guaranteed by Char.
Symmetry (SYM)
48
50
52
48
50
52
%
Worst case; measured at 50% of waveform
0.12
0.12
ps
1.875MHz to 20MHz, RMS; Measured Differentially (IEEE802.3-2005)
Phase Jitter
0.25
0.25
ps
12k to 20MHz, RMS; Measured Differentially
Period Jitter
2.5
2.5
ps
RMS
Cycle-to-Cycle Jitter
20
20
0
ps
1,000 cycles, Peak
Start-up Time
10
10
ms
Output valid time after power up, 25°C
Aging
± 5
± 5
ppm
25°C, 10 years
Package Outline and Dimensions Typical PCB Land Pattern
Unit: (mm)
6L SMD
3.2 x 2.5mm 3.20 ±0.05
2.50 ±0.05
6L SMD
3.2 x 2.5mm 3.20 ±0.05
2.50 ±0.05
1.175 Bsc
Pin #1 ID
Chamfer
0.30 x 45°
0.65 ±0.05
0.65 ±0.05
1.175 Bsc
Pin #1 ID
Chamfer
0.30 x 45°
0.65 ±0.05
0.65 ±0.05
1.27 Bsc
1.00 ±0.05
Pin #1 ID
Chamfer
0.25 x 45°
0.64 ±0.05
0.30 Ref
1.2 ±0.05
0.91
1.27 Bsc
1.00 ±0.05
Pin #1 ID
Chamfer
0.25 x 45°
0.64 ±0.05
0.30 Ref
1.2 ±0.05
0.91
6L SMD
5.0 x 3.2mm 5.00 ±0.05
3.20 ±0.05
6L SMD
5.0 x 3.2mm 5.00 ±0.05
3.20 ±0.05
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
2.54
2.60
1.50
0.90
OE/FM
GND
VDD
OUT+
ME# OUT-
2.54
2.60
1.50
0.90
OE/FM
GND
VDD
OUT+
ME# OUT-
1.175
1.0
0.90
2.20
VDD
OUT+
OUT-
OE/FM
GND
FM#
1.175
1.0
0.90
2.20
VDD
OUT+
OUT-
OE/FM
GND
FM#
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
2.54 Bsc
1.30 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
1.50 ±0.05
1.00 Ref
2.4
2.54 Bsc
1.30 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
1.50 ±0.05
1.00 Ref
2.4
7.00 ±0.05
5.0 ±0.05
6L SMD
7.0 x 5.0mm 7.00 ±0.05
5.0 ±0.05
6L SMD
7.0 x 5.0mm
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
5.08
3.60
OE/FM
GND
VDD
OUT+
ME# OUT-
1.60
1.60
5.08
3.60
OE/FM
GND
VDD
OUT+
ME# OUT-
1.60
1.60