Slim Relay G2RV 1
Slim Relay
G2RV
The only truly industrial 6 mm relay
• Lockable test switch models now available.
• Large plug-in terminals for reliable connection.
• LED indicator and mechanical flag for status indication.
• Input type with gold plated contacts available.
• Transparent housing allows inspection of contact condition.
• Slim width to save space.
• Push-in terminals and accessories for easy wiring.
• Lloyd’s approval (pending)
PATENTED
No test switch typeTest switch type
Features
■Test switch operation
OMRON Lockable test switch can be used in this way:
When the protection cover (located directly over the test switch) is closed, the test switch is retained in normal position (OFF state) by the
protection cover. After opening the protection cover, the test switch can be unlocked. The test switch can then be moved to the operated position
(ON state). After using the test switch, move it to the normal position (OFF state) and close the protection cover to prevent unwanted operation of
the test switch.
* Please check Precautions (Page. 17 : Precaution of test switch operation) when using test switch.
Application of test switch:
Example: Checking operation of Relays and sequence circuits.
Protection cover: lock
Protection cover: unlock
Contact normal position Contact operated position
(ON state)
Protection cover close
Protection cover open
2Slim Relay G2RV
Model Number Structure
■Model Number Legend
1. Auxiliary Type Designation
SL: Slim relay and socket combination
2. Wire Connection
7: Screw terminals
5: Push-in terminals
3. Relay LED
0: Without LED
4. Relay Test switch
0: No test switch type
1: Test switch type
5. Contact form
AP: Input type
Blank: Standard type
6. Input Voltage
Note: LED indicator available on socket.
Ordering Information
■List of Models
Relay and Socket Combinations
No test switch type
Test switch type
1234 5 6
G2RV-SL @ @ @ - @ - @
Classification Enclosure
rating
Input
voltage
Type of
connection
Test
switch
Contact form (SPDT)
Standard type Input type
Plug-in terminals General-purpose Unsealed AC/DC Screw terminals No G2RV-SL700 G2RV-SL700-AP
Ye s G 2 RV- S L 7 0 1 - - -
Push-in terminals No G2RV-SL500 G2RV-SL500-AP
Ye s G 2 RV- S L 5 0 1 - - -
Input voltage Contact form (SPDT)
Standard type (No test switch type) Input type (No test switch type)
Screw terminals Push-in terminals Screw terminals Push-in terminals
12 VDC G2RV-SL700 12 VDC G2RV-SL500 12 VDC G2RV-SL700-AP 12 VDC G2RV-SL500-AP 12 VDC
24 VDC G2RV-SL700 24 VDC G2RV-SL500 24 VDC G2RV-SL700-AP 24 VDC G2RV-SL500-AP 24 VDC
24 VAC/DC G2RV-SL700 24 VAC/DC G2RV-SL500 24 VAC/DC G2RV-SL700-AP 24 VAC/DC G2RV-SL500-AP 24 VAC/DC
48 VAC/DC G2RV-SL700 48 VAC/DC G2RV-SL500 48 VAC/DC G2RV-SL700-AP 48 VAC/DC G2RV-SL500-AP 48 VAC/DC
110 VAC G2RV-SL700 110 VAC G2RV-SL500 110 VAC G2RV-SL700-AP 110 VAC G2RV-SL500-AP 110 VAC
230 VAC G2RV-SL700 230 VAC G2RV-SL500 230 VAC G2RV-SL700-AP 230 VAC G2RV-SL500-AP 230 VAC
Input voltage Contact form (SPDT)
Standard type (Test switch type) Input type (Test switch type)
Screw terminals Push-in terminals Screw terminals Push-in terminals
24 VDC G2RV-SL701 24 VDC G2RV-SL501 24 VDC --- ---
24 VAC/DC G2RV-SL701 24 VAC/DC G2RV-SL501 24 VAC/DC --- ---
Slim Relay G2RV 3
Specifications
■Input Ratings
■Contact Ratings
*1) P level: λ60 = 0.1 × 10-6/operation
*2) If a gold layer is destroyed, contact ratings of standard type are applicable.
■Characteristics
Note: Values in the above table are the initial values.
Rated voltage Rated current*1 Must operate
voltage
Must release
voltage
Power consumption Input voltage
AC DC % of rated voltage AC (VA)
Approx.
DC (mW)
Approx.
% of rated voltage
50 Hz 60 Hz
12 VDC --- --- 27.2 mA 80% 10% --- 300 mW ±10%
24 VDC --- --- 13.3 mA --- 300 mW
24 VAC/DC 21.1 mA 22.5 mA 13.0 mA 0.5 VA 300 mW
48 VAC/DC 8.5 mA 9.0 mA 5.2 mA 0.4 VA 250 mW
110 VAC 7.1 mA 7.5 mA --- 0.8 VA ---
230 VAC 7.3 mA 7.9 mA --- 1.7 VA ---
*1) Rated currents are measured at 23 degrees Celsius (ambient)
Item Standard type (G2RV-SL700, 500, 701, 501) Input type (G2RV-SL700-AP, 500-AP)*2
Number of poles 1 pole
Load Resistive load
(cosφ = 1)
Inductive load
(cosφ = 0.4, L/R = 7 ms)
Resistive load
(cosφ = 1)
Rated load 6 A at 250 VAC;
6 A at 30 VDC
2.5 A at 250 VAC;
2 A at 30 VDC
50 mA at 30 VAC;
50 mA at 36 VDC
Rated carry current 6 A 50 mA
Max. switching voltage 400 VAC, 125 VDC 30 VAC, 36 VDC
Max. switching current 6 A 50 mA
Max. switching power 1,500 VA
180 W
500 VA
60 W ——
Failure rate (reference value)*1 10 mA at 5 VDC (P level) 1 mA at 100 mVDC (P level)
Item Standard type (G2RV-SL700, 500, 701, 501) Input type (G2RV-SL700-AP, 500-AP)
Contact resistance 100 mΩ max.
Operate (set) time 20 ms max.
Release time 40 ms max.
Max. operating frequency Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts*;
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)
Shock resistance Destruction: 1,000 m/s2
Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized
Endurance Mechanical: 5,000,000 operations min.
Electrical: 100,000 Typical;
NO 70,000 operations min. ;
NC 50,000 operations min.
Mechanical: 5,000,000 operations min.
Electrical: 5,000,000 operations min.
Ambient temperature Operating: –40°C to 55°C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 35 g
Overvoltage category III
Pollution degree 2
Contact material AgSnIn AgSnIn + Gold Plating
Creepage distance 7.0 mm
Clearance distance 5.5 mm
4Slim Relay G2RV
■Approved Standards
UL 508 (File No. E41643)
IEC/VDE (EN 61810)
Engineering Data
■Endurance Switching capacity of DC resistive load
Typical Operating and Release Time
Model Contact form Coil ratings Contact ratings Operations
G2RV-SL Series SPDT 12 to 48 VDC
24 to 230 VAC
250 VAC 6 A (Resistive Load)
30 VDC 6 A (Resistive Load)
400 VAC 2 A (Resistive Load)
6,000
Contact form Coil ratings Contact ratings Operations
SPDT 12, 24 VDC
24, 48 VAC/DC
110, 230 VAC
250 VAC 6 A (Resistive Load)
30 VDC 6 A (Resistive Load)
400 VAC 2 A (Resistive Load)
50,000
50,000
6,000
10
100
1000
02 4
Switching current (A)
Endurance (× 103 operations)
250VAC resistive load
30VDC resistive load
30VDC inductive load
(L/R=7ms)
250VAC inductive load
(cos ϕ = 0.4)
6
0,1
1,0
10,0
20 60 100 140 180 220
Switching voltage (VDC)
DC Breaking Current (A)
Model number Operating time (typical) Release time (typical)
G2RV-SL7@@/5@@ DC12 5 ~ 7 ms 5 ~ 8 ms
G2RV-SL7@@/5@@ DC24 5 ~ 7 ms 6 ~ 9 ms
G2RV-SL7@@/5@@ AC/DC24 5 ~ 7 ms 17 ~ 22 ms
G2RV-SL7@@/5@@ AC/DC48 5 ~ 7 ms 22 ~ 30 ms
G2RV-SL7@@/5@@ AC110 12 ~ 15 ms 22 ~ 30 ms
G2RV-SL7@@/5@@ AC230 12 ~ 15 ms 22 ~ 30 ms
Slim Relay G2RV 5
Accessories
■PLC Interface P2RVC-8-@-F
P2RVC-8-O-F (for G2RV-SL70@ series only)
List of Models
Specifications Electrical schematic P2RVC-8-O-F
P2RVC-8-I-F (for G2RV-SL700-AP series only)
List of Models
Specifications Electrical schematic P2RVC-8-I-F
Contact form Relay PLC Interface
Standard type G2RV-SL70@ series P2RVC-8-O-F
Input type G2RV-SL700-AP series P2RVC-8-I-F
Model number Description Connection
P2RVC-8-O-F PLC Output Interface for 8x
G2RV-SL70@-series
PNP - type
Ribbon cable connector
10 Pole, IEC603/1
Input Rated voltage 30 VAC/VDC max.
Current capacity 0.5 A per channel
2.0 A total current, power supply
terminal
Characteristics Ambient
temperature
Operating: 0 to 55°C
Storage: −20 to 85°C
Overvoltage
category
III
Pollution degree 2
Model number Description Connection
P2RVC-8-I-F PLC Output Interface for 8x
G2RV-SL700-series
PNP - type
Ribbon cable connector
10 Pole, IEC603/1
Input Rated voltage 30 VAC/VDC max.
Current capacity 0.5 A per channel
2.0 A total current, power supply
terminal
Characteristics Ambient
temperature
Operating: 0 to 55°C
Storage: −20 to 85°C
Overvoltage
category
III
Pollution degree 2
11
12
6Slim Relay G2RV
■Cables for PLC Interface P2RVC-8-@-F
Cables selection List
P2RV-4-@@@C
P2RV-4-@@@IMC
P2RV-4-@@@IFC
Cable to connect CJ1 to 4 × P2RVC-8-@-F
List of Models
Output
Model number
To be used for (combined with P2RVC-8-O-F)
P2RV-4-100C CJ1W-OD232/OD262
P2RV-4-200C CJ1W-OD232/OD262
P2RV-4-300C CJ1W-OD232/OD262
P2RV-4-500C CJ1W-OD232/OD262
P2RV-A100C Universal (stranded wires)
P2RV-A200C Universal (stranded wires)
P2RV-A300C Universal (stranded wires)
P2RV-A500C Universal (stranded wires)
P2RV-A050C-OMR GRT1 GRT1-OD8(G)-1
P2RV-A100C-OMR GRT1 GRT1-OD8(G)-1
P2RV-A050C-OMR NX NX-OD4256
P2RV-A100C-OMR NX NX-OD4256
P2RV-200C-SIM S7/300 6ES7 322-1BL00-0AA0, 32DO
P2RV-250C-SIM S7/300 6ES7 322-1BL00-0AA0, 32DO
P2RV-300C-SIM S7/300 6ES7 322-1BL00-0AA0, 32DO
P2RV-500C-SIM S7/300 6ES7 322-1BL00-0AA0, 32DO
P2RV-200C-SIM S7/400
6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO
P2RV-250C-SIM S7/400
6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO
P2RV-300C-SIM S7/400
6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO
P2RV-500C-SIM S7/400
6ES7422-1BL00-0AA0 & 6ES7422-7BL00-0AB0, 32DO
Input
Model number
To be used for (combined with P2RVC-8-I-F)
P2RV-4-100IFC CJ1W-ID231/ID233/ID261
P2RV-4-100IMC CJ1W-ID233/ID262
P2RV-4-200IFC CJ1W-ID231/ID233/ID261
P2RV-4-200IMC CJ1W-ID233/ID262
P2RV-4-300IFC CJ1W-ID231/ID233/ID261
P2RV-4-300IMC CJ1W-ID233/ID262
P2RV-4-500IFC CJ1W-ID231/ID233/ID261
P2RV-4-500IMC CJ1W-ID233/ID262
P2RV-A100C Universal (stranded wires)
P2RV-A200C Universal (stranded wires)
P2RV-A300C Universal (stranded wires)
P2RV-A500C Universal (stranded wires)
P2RV-A050IC-OMR GRT1
GRT1-ID8-1
P2RV-A100IC-OMR GRT1
GRT1-ID8-1
P2RV-A050IC-OMR NX NX-ID4442
P2RV-A100IC-OMR NX NX-ID4442
P2RV-200C-SIM S7/300 6ES7 321-1BL00-0AA0, 32DI
P2RV-250C-SIM S7/300 6ES7 321-1BL00-0AA0, 32DI
P2RV-300C-SIM S7/300 6ES7 321-1BL00-0AA0, 32DI
P2RV-500C-SIM S7/300 6ES7 321-1BL00-0AA0, 32DI
P2RV-200C-SIM S7/400
6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI
P2RV-250C-SIM S7/400
6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI
P2RV-300C-SIM S7/400
6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI
P2RV-500C-SIM S7/400
6ES7421-1BL00-0AA0 & 6ES7421-1BL01-0AA0, 32DI
I/O Model number Cable length Interface unit PLC Connection Connectors
Output P2RV-4-100C 1.0 m P2RVC-8-O-F
× 4
OMRON PLC
CJ1 Series: MIL
MIL40 - MIL10
× 4
P2RV-4-200C 2.0 m
P2RV-4-300C 3.0 m
P2RV-4-500C 5.0 m
Input P2RV-4-100IMC 1.0 m P2RVC-8-I-F
× 4
OMRON PLC
CJ1 Series: MIL
MIL40 - MIL10
× 4
P2RV-4-200IMC 2.0 m
P2RV-4-300IMC 3.0 m
P2RV-4-500IMC 5.0 m
Input P2RV-4-100IFC 1.0 m P2RVC-8-I-F
× 4
OMRON PLC
CJ1 Series:
Fujitsu
FCN40 -MIL10
× 4
P2RV-4-200IFC 2.0 m
P2RV-4-300IFC 3.0 m
P2RV-4-500IFC 5.0 m
P2RV-4-@@@C/P2RV-4-@@@IMC
P2RV-4-@@@IFC
12
39 40
1
2
10 9
(300)
(45)
CN1
CN2
CN3
CN4
CN1CN2CN3CN4
1
2
10 9
1
2
10 9
1
2
10 9
Cable length as indicated
by model number.
@@@ = length in centimeters
1
2
10 9
(300)
A1B1
(45)
A20B20
CN1
CN2
CN3
CN4
CN1CN2CN3CN4
1
2
10 9
1
2
10 9
1
2
10 9
Cable length as indicated
by model number.
@@@ = length in centimeters
P2RV-4-@@@IFCP2RV-4-@@@C/P2RV-4-@@@IMC
Slim Relay G2RV 7
4 × 10 pole IDC mounting to 4 × P2RVC-8-@-F
Technical data
P2RV-A@@@C
Cable, single sided 10 pole IDC connector, to connect to P2RVC-8-@-F
List of Models
CN1
123456789
A1 A2 A3 A4 A5 A6 A7 A8NCA9
40 pole IDC mounting to Omron PLC CJ1-OD232
P2RV-4-@@@IFC
P2RV-4-@@@IMC
P2RV-4-@@@C
10
CN2
123456789
A10 A11 A12 A13 A14 A15 A16 A17 NCA18
10
CN3
123456789
B1 B2 B3 B4 B5 B6 B7 B8NCB9
10
CN4
123456789
B10 B11 B12 B13 B14 B15 B16 B17 NCB18
10
CN1
123456789
40 3836 34 32 30 2826 NC24
10
CN2
123456789
39 37 35 33 31 29 27 25 NC23
10
CN3
123456789
20 1816 14 12 10 86NC4
10
CN4
123456789
19 17 15 13 11 9 7 5 NC3
10
CN1
123456789
40 3836 34 32 30 2826 22 24
10
CN2
123456789
39 37 35 33 31 29 27 25 21 23
10
CN3
123456789
20 1816 14 12 10 8624
10
CN4
123456789
19 17 15 13 11 9 7 5 1 3
10
Cable length as indictad
by model number.
@@@ = length in centimeters
Split into 4 sections
Length = 30 cm
40 Pole
CN2
CN1
CN4
CN3
Control line AWG28/0.08 mm2, tin-plated copper
Diameter cable 10.7 mm (one end splits into 4 sections: A, B, C, D)
Operating voltage 60 VDC
Continuous current per signal wire 0.5 A
Max. total current, 4 bytes, each 1.0 A
Test voltage 0.5 KV, 50 Hz, 1 min
Operating temperature range -20°C to +50°C
I/O Model number Cable length Interface unit PLC interface Connectors
Universal
(Output/
Input)
P2RV-A100C 1.0 m P2RVC-8-@-F - MIL10 -
No connector
P2RV-A200C 2.0 m
P2RV-A300C 3.0 m
P2RV-A500C 5.0 m
?P
?R?T?V?X
9
1
10
2
1
10
(45)
(10)
(2)
(70)
Cable length as indicated
by model number.
@@@ = length in centimeters
8Slim Relay G2RV
10 pole IDC mounting to P2RVC-8-@-F
Technical data
P2RV-A@@@C-OMR GRT1
P2RV-A@@@IC-OMR GRT1
List of Models
10 pole IDC mounting to P2RVC-8-@-F
GRAY / BLACK
GRAY / RED
ORANGE / BLACK
ORANGE / RED
GREEN / BLACK
GREEN / RED
PINK / BLACK
PINK / RED
BLUE / BLACK
BLUE / RED
10
9
8
7
6
5
4
3
2
1
Open end
Cable length as indictad
by model number.
@@@ = length in centimeters
Outer isolation removed
10 Pole
Control line AWG26/0.14 mm2, tin-plated copper
Diameter cable 7.6 mm
Operating voltage 60 VDC
Continuous current per signal wire 0.5 A
Max. total current 1.0 A
Test voltage 0.5 KV, 50 Hz, 1 min
Operating temperature range -20°C to +50°C
I/O Model number Cable
length Interface unit PLC interface Connectors
Output P2RV-A050C-OMR GRT1 0.5 m P2RVC-8-O-F OMRON Smart
slice I/O module
GRT1 Series
GRT1-OD8(G)-1
XW7E 12pole -
MIL10
P2RV-A100C-OMR GRT1 1.0 m
Input P2RV-A050IC-OMR GRT1 0.5 m P2RVC-8-I-F OMRON Smart
slice I/O module
GRT1 Series
GRT1-ID9(G)-1
P2RV-A100IC-OMR GRT1 1.0 m
9
1
10
2
(45)
A1
A6
B1
B6
?P
?R?T?V?X
(45)
Cable length as indicated
by model number.
@@@ = length in centimeters
1
2
3
4
5
6
7
8
9
10
P2RV-A@@@C-OMR GRT1
A1
B1
A2
B2
A4
B4
A5
B5
NC
B6
1
2
3
4
5
6
7
8
9
10
P2RV-A@@@IC-OMR GRT1
B6
A6
B4
A4
B3
A3
B1
A1
B2
NC
Slim Relay G2RV 9
P2RV-A@@@C-OMR NX
P2RV-A@@@IC-OMR NX
List of Models
10 pole IDC mounting to P2RVC-8-@-F
P2RV-@@@C-SIM S7/@00
Cables to connect Siemens S7/300 or S7/400 to 4 × P2RVC-8-@-F
List of Models
I/O Model number Cable
length Interface unit PLC interface Connectors
Output P2RV-A050C-OMR GRT1 0.5 m P2RVC-8-O-F OMRON I/O
module NX
Series
XW7F 16pole-
MIL10
P2RV-A100C-OMR GRT1 1.0 m
Input P2RV-A050IC-OMR GRT1 0.5 m P2RVC-8-I-F
P2RV-A100IC-OMR GRT1 1.0 m
?P
?R?X ?V?T
A1
B1
A6
B6
(45)
9
1
10
2
(45)
Cable length as indicated
by model number.
@@@ = length in centimeters
1
2
3
4
5
6
7
8
9
10
P2RV-A@@@C-OMR NX
A1
B1
A3
B3
A5
B5
A7
B7
NC
B8
1
2
3
4
5
6
7
8
9
10
P2RV-A@@@IC-OMR NX
B7
A7
B5
A5
B3
A3
B1
A1
B8
NC
Model number Cable length PLC type Configuration
P2RV-200C-SIM S7/300 2.0 m Siemens S7/300
4x1 Byte
P2RV-250C-SIM S7/300 2.5 m
P2RV-300C-SIM S7/300 3.0 m
P2RV-500C-SIM S7/300 5.0 m
P2RV-200C-SIM S7/400 2.0 m Siemens S7/400
4x1 Byte
P2RV-250C-SIM S7/400 2.5 m
P2RV-300C-SIM S7/400 3.0 m
P2RV-500C-SIM S7/400 5.0 m
10 Slim Relay G2RV
■Single Relays for Maintenance
Model Number Legend
1. Number of Poles
1: 1 pole
2. Terminals
S: Plug-In
3. Relay LED
Blank: Without LED
4. Relay Test switch
Blank: No test switch
I: Test switch
5. Contact Material
Blank: AgSnIn
AP: AgSnIn hard gold-plated
6. Rated Coil Voltage
11 VDC, 21 VDC, 48 VDC
List of Models
■Cross bars
Model Number Legend
1. Number of Poles 2. Color
020: 2 poles R: Red
030: 3 poles S: Blue
040: 4 poles B: Black
100: 10 poles
200: 20 poles
List of Models
@ select color: R = Red, S=Blue, B=Black
Specification
■Plastic Labels for G2RV Sockets
12345
6
G2RV-@ - @ @ @ - @- @
Model number Replacement for
G2RV-1-S 11 VDC G2RV-SL700/500 12 VDC
G2RV-1-S 21 VDC G2RV-SL700/500 24 VDC
G2RV-SL700/500 24 VAC/DC
G2RV-1-S 48 VDC G2RV-SL700/500 48 VAC/DC
G2RV-SL700/500 110 VAC
G2RV-SL700/500 230 VAC
G2RV-1-S-AP 11 VDC G2RV-SL700/500-AP 12 VDC
G2RV-1-S-AP 21 VDC G2RV-SL700/500-AP 24 VDC
G2RV-SL700/500-AP 24 VAC/DC
G2RV-1-S-AP 48 VDC G2RV-SL700/500-AP 48 VAC/DC
G2RV-SL700/500-AP 110 VAC
G2RV-SL700/500-AP 230 VAC
G2RV-1-SI 21 VDC G2RV-SL701/501 24 VDC
G2RV-SL701/501 24 VAC/DC
G2RV-1-SI G2RV-1-S
12
P2RVM -@ @
Model number Poles Color
P2RVM-020@2
Red (R)
Blue (S)
Black (B)
P2RVM-030@3
P2RVM-040@4
P2RVM-100@10
P2RVM-200@20
Max current
(EN60947-7-1 section 8.3.3 / 1991)
32 A
Max. Voltage 400 VAC
Max. Voltage
when cutting Cross-bar without using separation
plate or end-bracket
250 VAC
Model number Box quantity Color
R99-15 for G2RV 1 piece = 1 sheet = 120 labels White
Slim Relay G2RV 11
■Labels (Stickers) for G2RV Sockets
■Separating Plates
Model number Box quantity Color
R99-16 for G2RV 1 piece = 1 sheet = 484 labels
(stickers)
White
Model number Description
P2RV-S Provides isolation between adjacent relays to
achieve 400 V isolation.
12 Slim Relay G2RV
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Complete Unit
12
11
14
A1
A2
24 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
12 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
Other Coil Voltage
Terminal Arrangement/
Internal Connections
(Top View)
Five,
M2.5 × 6
6.2 max.
99.2
7.188.9
26.1
47.2
70.9
83
106.7 max.
92.7 max.
35
Input circuit
G2RV-SL700
G2RV-SL700-AP
12
11
14
A1
A2
24 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
12 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
Other Coil Voltage
Terminal Arrangement/
Internal Connections
(Top View)
Five,
M2.5 × 6
26.1
47.2
70.9
83
7.1
88.9
102.2
109.7 max.
6.2 max.
92.7 max.
35
Dimensions Terminal Arrangement
Dimensions Terminal Arrangement
Input circuit
G2RV-SL701
Slim Relay G2RV 13
12
11
14
A1
A2
24 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
12 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
Other Coil Voltage
Terminal Arrangement/
Internal Connections
(Top View)
6.2 max.
99.2
88.9 7.1
24.6
46
69.8
82.9
106.7 max.
97.4 max.
35
Input circuit
G2RV-SL500
G2RV-SL500-AP
12
11
14
A1
A2
24 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
12 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
Other Coil Voltage
Terminal Arrangement/
Internal Connections
(Top View)
6.2 max.
24.6
46
69.8
82.9
88.9
102.2 7.1
109.7 max.
97.4 max.
35
Input circuit
G2RV-SL501
Dimensions Terminal Arrangement
Dimensions Terminal Arrangement
14 Slim Relay G2RV
Single Relay
A2
A1
12
11
14
Terminal Arrangement/
Internal Connections
(Bottom View)
30.5 max.
3.5
0.5 2.4
1.8
5.2 max.
5.04 5.04
322
33 max.
16.2
Input circuit
G2RV-1-S
G2RV-1-S-AP
G2RV-1-SI
A2
A1
12
11
14
Terminal Arrangement/
Internal Connections
(Bottom View)
30.5 max.
5.2 max.
1.80.5
2.4
5.04
5.04
3
22
36 max.
16.2
3.5
Input circuit
Slim Relay G2RV 15
Installation
■Tools
G2RV-SL70@ series: Flat-Blade screwdriver should be used for mounting and / or releasing cables.
G2RV-SL50@ series: Flat-Blade screwdriver should be used for mounting stranded wires without ferrules and / or releasing cables.
Applicable Screwdriver
● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Examples: FACOM AEF.2.5×75E (AEF. 3×75E)
VESSEL No. 9900-(-)2.5×75 (No. 9900-(-)3×100)
WAGO 210-119
WIHA 260/2.5×40 (260/3×50)
*Chamfering the tip of the driver improves insertion when used as an exclusive tool.
P2RVC-8-O-F (for G2RV-SL70@ series only)
List of Models
■Applicable Wires
Applicable Wire Sizes
G2RV-SL700 Series
Box clamp technology
G2RV-SL500 Series
Push-in technology
● Flat-blade, Parallel-tip
● Flat-blade, Flared-tip
2.5 dia. (3.0 mm max.)
Cannot be used.
Model number Description Connection
P2RVC-8-O-F PLC Output Interface for 8x
G2RV-SL70@-series
PNP - type
Ribbon cable connector
10 Pole, IEC603/1
Wire type Applicable wire size Stripping length
Stranded without ferrules 0.5 - 2.5 mm27mm
Stranded with ferrules and plastic collar 0.5 - 2.5 mm27mm
Stranded with ferrules without plastic collar 0.5 - 2.5 mm27mm
Solid 0.5 - 2.5 mm27mm
Wire type Applicable wire size Stripping length
Stranded without ferrules 0.5 - 2.5 mm212 mm
Stranded with ferrules and plastic collar 0.5 - 2.5 mm212 mm
Stranded with ferrules without plastic collar 0.5 - 2.5 mm212 mm
Solid 0.5 - 2.5 mm212 mm
16 Slim Relay G2RV
■Wiring
Use wires of the applicable sizes specified above. The length of the exposed conductor should be 7 mm for a G2RV-SL700 series, 12 mm for a
G2RV-SL500 series.
Wiring Procedure for G2RV-SL500 series
● Wiring
Insert the exposed conductor into the connection hole.
No other tools are required.
Note: In case of wiring stranded wires without ferrules screwdriver
should be inserted before inserting the wire.
Screwdriver should be removed after fully insertion of the wire.
● Removing
Insert the specified screwdriver into the release hole.
Removing wire.
Removing screwdriver.
7 mm
Fig. 1 Exposed Conductor Length
12 mm
G2RV-SL700
G2RV-SL500
Screwdriver hole
Wire connection hole
Wire
Slim Relay G2RV 17
Precautions
Precautions for Connection
•Do not move the screwdriver up, down, or from side to side while it
is inserted in the hole. Doing so may cause damage to internal
components (e.g., deformation of the clamp spring or cracks in the
housing) or cause deterioration of insulation.
•Do not insert the screwdriver at an angle. Doing so may break the
side of socket and result in a short-circuit.
•Do not insert two or more wires in the hole. Wires may come in
contact with the spring causing a temperature rise or be subject to
sparks.
•Insert the screwdriver along the hole wall as shown below.
•If lubricating liquid, such as oil, is present on the tip of screwdriver,
the screwdriver may fall out resulting in injury to the operator.
•Insert the screwdriver into the bottom of the hole. It may not be
possible to connect cables properly if the screwdriver is inserted
incorrectly.
General Precautions
•Do not use the product if it has been dropped on the ground.
Dropping the product may adversely affect performance.
•Confirm that the socket is securely attached to the mounting track
before wiring. If the socket is mounted insecurely it may fall and
injure the operator.
•Ensure that the socket is not charged during wiring and
maintenance. Not doing so may result in electric shock.
•Do not pour water or cleansing agents on the product. Doing so
may result in electric shock.
•Do not use the socket in locations subject to solvents or alkaline
chemicals.
•Do not use the socket in locations subject to ultraviolet light (e.g.,
direct sunlight). Doing so may result in markings fading, rust,
corrosion, or resin deterioration.
•Do not dispose the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of
screwdriver in the fixture rail, and move it in the direction shown
below.
Precaution for Operation of Test switch
■Tool: G2RV-SL701/501 series: 2.5 mm
width Flat-Blade screwdriver should be
used for operation of test switch.
● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
■Cautions:
•When you operate a test switch, please turn off electrical power
supply.
•After you have finished to operate a test switch, return the test
switch to its original state
•Do not use test switch as a switch.
•Durability of test switch operation is more than 100 times.
•Please avoid to use the latching lever by ON state with carry
current in long time, more than 24 hours to maintain the initial
performance for operation checking.
Screwdriver
● Flat-blade, Parallel-tip
● Flat-blade, Flared-tip
2.5 dia. (3.0 mm max.)
Cannot be used.
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. J11E-EN-06
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.
55.59.01.43.00
• 01-800-226-6766 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
Authorized Distributor:
J46I-E-02 06/14 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems
• Machine Automation Controllers (MAC) • Programmable Controllers (PLC)
• Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls
• Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers
• Single and Multi-loop Controllers
Sensors & Vision
• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors
• Amplified Photomicrosensors • Measurement Sensors
• Ultrasonic Sensors • Vision Sensors
Industrial Components
• RFID/Code Readers • Relays • Pushbuttons & Indicators
• Limit and Basic Switches • Timers • Counters • Metering Devices
• Power Supplies
Safety
• Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety
Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. •
Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands.
•
+31 (0) 23 568 13 00
•
www.industrial.omron.eu
