CONNECTOR WITH SPRING LOCKING ASSEMBLY GMM -AZSSFDA GM -25LBPM Combination of Connectors with Spring Locking Assembly Retainer plate Connector 2) Clearance to be Tore than 15 mm a | Panel ji / oy ae 48 / \ a 5] Locked state Unlocked state Shield case Can be used for panel-to-cable and cable-to-cable con- nection. The spring and retainer plate should be ordered separately. Two sach of the spring and retainer plate are required for one connector. * Cannot be used for rear panel mounting. When locking the spring, pay attention to the connector mounting space. The fixing screw is also available in inch size (No. 4-4QUNC). with Spring Locking Assembly 7]CONNECTOR WITH SPRING LOCKING ASSEMBLY @ Ordering Information Connector with shield case and spring lock GM-C( )LBNSM @ 86 Series Prefix GM, GME, GMP Plating on Shell Blank:Chromate coating over zinc plating Cc: Nickel plating () Number of Contacts: 9, 15, 25, 37, 50 (4) Case LB: Chromate coating over zinc plating LBN: Nickel plating ) Spring Lock Connector Type M: Solder type male connector (GM series) Solderless type male housing (GMP series) F: Solder type female connector (GM & GME series) Solderless type female housing (GMP series) 72 Connector with Spring Lock GM-C( )SM 2aaag Series Prefix GM, GME, GMF, GMP, GMM Plating on Shell Blank:Chromate coating over zinc plating A: Chromate coating over zinc plating (for GMM) C: Nickel plating Number of Contacts: 9, 15, 25, 37, 50 @Q Spring Lock ) Connector Type M: Solder type male connector (GM series) Solderless type male housing (GMP series) F: Solder type female connector (GM & GME series) Solderless type female housing (GMP series) MW: Wrapping type male connector (GM series) FW: Wrapping type female connector (GM series) MD: DIP type male connector (GM series) FD: DIP type female connector (GM, GMF series) BMDA<: Right angle A size male connector (GM series) BFDA4: Right angle A size female connector (GM series) BMDBE: Right angle B size male connector (GM series} BFDB6: Right angle B size female connector (GM series) MDA: _ Right angle A size male connector (GMM series) FDA: Right angle A size female connector (GMM series) MDB: Right angle B size male connector (GMM series) FDB: Right angle B size female connector (GMM series) GM-25SFDConnector with Shield case and Retainer Plate GM-C( )LBNPNM a9 9 08 Series Prefix GM, GME, GMP @ Plating on Shell Blank:Chromate coating over zinc plating C: Nickel plating (3) Number of Contacts: 9, 15, 25, 37, 50 4) Case LB: Chromate coating over zinc plating LBN: Nickel plating ) Retainer plate @ Connector Type M: Solder type male connector (GM series) Solderless type male housing (GMP series) F: Solder type female connector (GH & GME series} Solderiess type female connector (GMP series) GM-25LBPM GM-25LBPF Connector with Retainer Piate GM-C( )PM @aaaea Series Prefix GM, GME, GMF, GMP, GMM Plating on Shell Blank:Chromate coating over zinc plating A: Chromate coating over zinc plating (for GMM) C: Nickel plating ) Number of Contacts: 9, 15, 25, 37, 50 4) Retainer Plate 8 Connector Type Solder type male connector (GM series) Solderless type male housing (GMP series) F: Solder type female connector (GMP & GME series) Solderless type female housing (GMP series) MW: Wrapping type male connector {GM series) FW: Wrapping type female connector (GM series) MD: DIP type male connector (GM series) FD: DIP type female connector (GM & GMF series) BMDA&: Right angle A size male connector (GM series) BFDA4: Right angle A size female connector (GM series) BMDBE: Right angie B size male connector (GM series) BFDB6: Right angle B size female connector (GM series) MDA: _ Right angle A size male connector (GMM series} FDA: Right angle A size female connector (GMM series) MDB: _ Right angle B size male connector (GMM series) FDB: Right angle B size female connector (GMM series) GM-25PF 73