Crystal oscillator VOLTAGE-CONTROLLED CRYSTAL OSCILLATOR VG-1011JA Product number (please refer to page 4) Q3602JA0xxxxx00 * * * * * * High accuracy and high reliability due to trimmerless design. Use of CMOS IC assures low current consumption. Excellent environmental capability. Supply voltage: 5 V Available for lead (Pb)-free soldering. Available for lead (Pb)-free terminal. Actual size Specifications (characteristics) Item Symbol Specifications Output frequency range Remarks f0 1.5000 MHz to 28.63636 MHz Power source voltage Max. supply voltage VDD-GND -0.5 V to +7.0 V Operating voltage VDD 5.0 V 0.5 V Temperature range Storage temperature TSTG -55 C to +125 C Operating temperature TOPR As per below table f/f0 As per below table Frequency stability Stored as bare product after unpacking Current consumption Iop 10 mA Max. No load condition Pull range fC As per below table VC = 2.5 2.0 V Input resistance ZIN 10 M Min. DC Level Positive polarity VC = 0.5 to 4.5 V tw/ t 40 % to 60 % 1.4 V or 50 % VDD level VOH VDD -0.4 V Min. IOH = -0.8 mA VOL 0.4 V Max. IOL = 1.6 mA Output load condition (fan out) CL 2 TTL or 15 pF Max. TTL load / CMOS load Output rise time tR 8 ns Max. CMOS load: 20 % 80 % VDD Frequency change polarity Duty Output voltage Output fall time tF Oscillation start up time TTL load: 0.4 V 2.4 V 8 ns Max. CMOS load: 80 % 20 % VDD 5 ns Max. TTL load: 2.4 V 0.4 V tOSC 4 ms Max. Time at 4.5 V to be 0 s fa 5 x 10-6 Max. Ta = +25 C, VDD = 5 V, first year S.R. 5 x 10-6 Max. Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions Aging Shock resistance 5 ns Max. Note: Please contact us for inquiries about operating temperature, frequency stability, pull range. External dimensions (Unit: mm) Stability / Temperature range Stability NO. Pin terminal 8.65 #3 9.8 Max. #4 1 2 3 4 VC GND OUT VDD 15 x 10-6 20 x 10-6 25 x 10-6 Pull range Temperature range -20 C to +70 C -30 C to +75 C -40 C to +85 C V W X S - B - A G, K, N - - B - - G, K, N Pull range B 20 x 10-6 Min. G 50 x 10-6 Min. K 75 x 10-6 Min. N 100 x 10-6 Min. Please contact us for inquiries about the available frequency. Recommended soldering pattern #2 #1 14.0 Max. (Unit: mm) 0.51 5.08 0.25 Min. 8.8 0.25 4.7 Max. 4.06 3.0 1.3 7.62 5.08 68