Rectangular Thin Film Chip Resistors Features These Thin Film Chip Resistors are designed for high precision, stability and reliability. Available in 0201 thru 2512 sizes, having a TCR of either 25ppm/C, 50ppm/C or 100ppm/C. Suitable for flow and reflow soldering. Unit: inches (mm) Dimensions Specifications Series L W T i1 i2 TFCR0201 0.024 0.002 (0.6 0.05) 0.012 0.001 (0.3 0.02) 0.010 0.002 (0.25 0.05) 0.006 0.002 (0.15 0.05) 0.006 0.002 (0.15 0.05) TFCR0402 0.040 0.002 (1.0 0.05) 0.020 0.002 (0.5 0.05) 0.014 0.002 (0.35 0.05) 0.008 0.004 (0.2 0.01) 0.008 0.004 (0.2 0.01) TFCR0603 0.063 0.008 (1.6 0.2) 0.031 0.008 (0.8 0.2) 0.014 0.004 (0.45 0.10) 0.010 0.006 (0.25 0.15) 0.010 0.006 (0.25 0.15) TFCR0805 0.079 0.008 (2.0 0.2) 0.050 0.008 (1.25 0.20) 0.018 0.006 (0.45 0.15) 0.016 0.008 (0.4 0.2) 0.012 0.008 (0.3 0.2) TFCR1206 0.126 0.008 (3.2 0.2) 0.063 0.008 (1.6 0.2) 0.022 0.006 (0.57 0.15) 0.018 0.008 (0.45 0.2) 0.012 0.008 (0.3 0.2) TFCR1210 0.126 0.008 (3.2 0.2) 0.098 0.006 (2.50 0.15) 0.022 0.006 (0.56 0.15) 0.018 0.008 (0.45 0.2) 0.012 0.008 (0.3 0.2) TFCR2010 0.197 0.008 (5.0 0.20) 0.098 0.006 (2.50 0.15) 0.217 0.004 (0.55 0.10) 0.236 0.012 (0.60 0.30) 0.02 0.010 (0.50 0.25) TFCR2512 0.248 0.008 (6.30 0.20) 0.122 0.006 (3.10 0.15) 0.217 0.004 (0.55 0.10) 0.236 0.012 (0.60 0.30) 0.02 0.010 (0.50 0.25) Rated Power at 70C Maximum Working Voltage TFCR0201-20W 0.05W PR or 15V whichever is less 30V -55C ~ 150C 50W ~ 33KW TFCR0402-16W 0.063W PR or 25V whichever is less 75V -55C ~ 150C 10W ~ 255KW TFCR0603-16W 0.063W PR or 75V whichever is less 150V -55C ~ 150C 4.7W ~ 1 Meg W TFCR0603-10W TFCR0805-10W 0.10W 0.10W PR or 75V whichever is less PR or 100V whichever is less 150V 200V -55C ~ 150C -55C ~ 150C 4.7W ~ 1 Meg W 4.7W ~ 2 Meg W TFCR0805-8W TFCR1206-8W 0.125W 0.125W PR or 100V whichever is less PR or 150V whichever is less 200V 300V -55C ~ 150C -55C ~ 150C 4.7W ~ 2 Meg W 4.7W ~ 2.5 Meg W TFCR1206-4W 0.25W PR or 150V whichever is less 300V -55C ~ 150C 4.7W ~ 2.5 Meg W TFCR1210-4W 0.25W PR or 150V whichever is less 300V -55C ~ 150C 4.7W ~ 1 Meg W TFCR1210-2W TFCR2010-2W 0.5W PR or 150V whichever is less 300V -55C ~ 150C 4.7W ~ 1 Meg W 0.5W PR or 150V whichever is less 300V -55C ~ 150C 4.7W ~ 1 Meg W TFCR2512-2W 0.5W PR or 150V whichever is less 300V -55C ~ 150C 4.7W ~ 1 Meg W NOTE: *Maximum Operating Overload Voltage Temperature Range * Overload Voltage=2.5*(P*R) or Max. overload voltage listed above, whichever is lower. Markings on Thin Film Chip Resistors may have an internal lot identification code or the E-24 (5%) or E-96 (1%) marking code. If value identification is required, please consult your sales representative for availability. Values available in the E-24 Series that are crossover values (same value for 1% and 5%) will typically be marked with a 3-digit E-24 Series marking code. * For 0201 case size: TCR is 50ppm for values above 5K W TFCR1206-8W -- E -- How To Order XXXX B TCR E: 25PPM/C C: 50PPM/C K: 100PPM/C Resistance Value Standard termination finish for this T Series Resistance Tolerance B: 0.1% C: 0.25% D: 0.50% F: 1% All components in this section are RoHS compliant per the EU directives and definitions. 55 Resistance Range 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com product is 100% matte Tin (Sn) Packaging T: Tape Description Requirements Characteristics Within specified tolerance Temperature Coefficient of Resistance (T.C.R.) E: Within 25ppm/C C: Within 50ppm/C K: Within 100ppm/C Measuring temperature +25/ + 125C Within (0.5% +0.05W) No major visible damage 2.5 times rated voltage 5 seconds At least 1,000 Meg W 100V 1 minute Within (0.5% +0.05W) no flashover, scorching or insulation breakdown 1/10: AC 150V 1 minute 1/8: AC 300V 1 minute Insulation Resistance Withstanding Voltage 100 80 60 40 20 0 -55 0 70 125 150 Ambient temperature (C) Terminal Strength Within (0.5% +0.05W) No mechanical damage Install a sample on the board and bend the board 3/45mm for 10 seconds Solder Heat Resistance Within (0.5% +0.05W) No major visible damage Dip into 260C solder bath for 10 seconds Solderability At least 95% of the dipping surface must be covered by new solder 235C 2 seconds Temperature Cycle Within (0.5% +0.05W) No major visible damage Markings Legible Cycle between -55C and + 150C for 5 cycles Load Life in Moisture Within (0.5% +0.05W) No major visible damage Markings Legible Rated voltage 1.5 hours "ON" 0.5 hours "OFF" 40C, 95% RH 1,000 hours Load Life Within (0.5% +0.05W) No major visible damage Markings Legible Rated voltage 1.5 hours "ON" 0.5 hours "OFF" 70C 1,000 hours 50 Temperature Coefficient of Resistance (25C/125C) 25 Short-time Overload 0.10 0.05 0 0 -25 -0.05 -50 10 Solder Heat Resistance (260C, 10 seconds) 100 1K -0.10 10 10K 100k Resistance () Temperature Cycle (-55C/125C, 5 cycles) 0.10 R/R(%) R/R(%) These specifications are typical and are based on standard operating conditions. R/R(%) Examples of Typical Characteristics T.C.R.(ppm/C) * NOTE: 0.05 0.10 0.05 0 -0.05 -0.05 -0.05 1K 10K 100k Resistance () -0.10 10 100 1K 10K 100k Resistance () 0.05 0 100 1K 0.10 0 -0.10 10 100 Load Life in Moisture 40C, 90-95% RH, RCWV 1,000 hours R/R(%) Rated power (%) Resistance Value Short-time Overload DERATING CURVE Test method JIS C 5202 10K 100k Resistance () -0.10 10 5900 Shepherd Mountain Cove * Austin, TX 78730 Phone: 512 / 794-0081 * Fax: 512 / 794-0087 * Toll Free: 800 / 950-8365 e-mail: sales@venkel.com * www.venkel.com 100 1K 10K 100k Resistance () 56