FA
OS-CON
TM
-105C
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com66
FA OS-CON
TM
Series
The FA series is an OS-CON
TM
series with higher capacitance values than the older CFM series. The
low ESR, high ripple current capability and small size make these capacitors ideal for use in low
profile DC-DC converters and also for stereo and video recor der applications. These capacitors can
be used in filter circuits of switching power supplies and also for noise limiters.
The FA series capacitors are solvent pr oof. Refer to the Mini-Glossary for cleaning guidelines and
recommended cleaning agents that ar e compatible with United Chemi-Con products.
OS-CON
TM
Low ESR
Long Life
Solvent Proof
105C
Maximum
Temperature
Actual
Size
Radial lead terminals.
Capacitance range: 15 to 2,200µF.
Voltage range: 4 to 25VDC.
Category temperature range: 55Cto
105C.
Leakage current: After 2 minutes with rated voltage applied at
20C, see ratings
tables for leakage current values.
Standard capacitance tolerance: 20%;
10% optional for Ø6.3, Ø8 and Ø10.
Nominal case size (DL): 6.39.8mm to1625mm.
Rated lifetime: 1,000 to 2,000 hours at
105C depending on case diameter.
Summary of Specifications
FA
OS-CON
TM
-105C
FA Series
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com 67
FA Specifications
Item
Category Temperature Range 55 to
105C
Rated Voltage Range 4 to 25VDC
Capacitance Range 15 to 2,200F
Capacitance Tolerance 20% (M);
10% (K) optional for Ø6.3,Ø8 and Ø10; at
20C,120Hz
Leakage Current After 2 minutes with rated voltage applied at
20C, see Ratings Tables for specified values.
Characteristics
Moisture Resistance The following specifications shall be satisfied when the capacitors are restored to
20C
after exposing them for 1,000 hours at
60C, 90-95%RH without voltage applied. The rated
voltage shall be applied to the capacitors for a minimum of 30 minutes at
105C.
Capacitance change: ≤
10% of initial measured value
Tan (DF) : ≤150% of initial specified value except Ø105 case size
: ≤200% of initial specified value for Ø105 case size
Leakage current : ≤initial specified value
Endurance
(Load Life) The following specifications shall be satisfied when the capacitors are restored to
20C after
subjecting them to the DC rated voltage for the specified test time at
105C. (20V shall be
applied for the capacitors with a 25V rating.)
Capacitance change : ≤20% of initial measured value
Tan (DF) : ≤150% of initial specified value
Leakage current : ≤initial specified value
Rated Voltage (V)
Z(
55C)/Z(
20C)
Z(
40C)/Z(
20C)
Z(
105C)/Z(
20C)
4-25
1.00-1.25
1.00-1.20
0.75-1.00
Temperature
Characteristics At 100kHz, impedance (Z) ratio between the 55C,40C or
105C value and
20C value
shall not exceed the values given below.
Case Diameter
Test Time
Ø6.3,Ø8 & Ø10mm
2,000 Hours
Ø12.5 & Ø16mm
1,000 Hours
Rated Ripple Current Multipliers
Refer to Section 4 of the
Mini-Glossary for explanation of
Rated Ripple Current Multipliers.
Ambient Temperature (C)
≤
45C
1.0
65C
0.85
85C
0.7
95C
0.4
105C
0.25
Dissipation Factor (Tan ) Tan (DF) at
20C,120Hz shall not exceed the specified values given in the Ratings Tables.
Radial Lead Unit: mm
Diagram of Dimensions
15 MIN.
PVC Sleeve
L'
L
d
DD'F
: Standard position of lead terminals
: Actual position of lead terminals A & A'
: Middle point C between A & A'
4 MIN. G
F
K
A'
A
C
For optional lead configurations and
tape and ammo packaging, refer to
the beginning of the Miniature section.
ØD
6.3
8
10
12.5
16
ØD'max.
ØD0.5
ØD0.5
ØD0.5
ØD0.5
ØD0.5
L'max.
L1.0
L1.0
L1.0
L1.0
L1.0
Ød
0.5
0.6
0.5 (5L); 0.6 (10.5L)
0.8
0.8
F0.5
2.5
3.5
5.0
5.0
7.5
G max.
0.5
0.5
0.5
0.8
0.8
K max.
0.5
0.5
0.5
0.8
0.8
FA
OS-CON
TM
-105C
FA Series
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com68
Standard Voltage Ratings - Radial Lead
150 6FA150M 8 10.5 18.9 0.07 30 2,780
150 6FA150MA 10 5 18.9 0.07 60 2,100
330 6FA330M 10 10.5 41.5 0.07 25 3,500
2,200 6FA2200M 16 25 277.0 0.13 15 9,750
6.3 Volts
47 10FA47M 6.3 9.8 4.7 0.06 60 2,020
68 10FA68M 6.3 9.8 13.6 0.07 50 2,040
100 10FA100M 8 10.5 20.0 0.07 30 2,680
100 10FA100MA 10 5 20.0 0.07 60 2,100
220 10FA220M 10 10.5 44.0 0.07 27 3,370
10 Volts
47 16FA47M 6.3 9.8 15.0 0.06 60 1,830
68 16FA68M 8 10.5 21.8 0.06 40 2,600
68 16FA68MA 10 5 21.7 0.07 65 1,850
100 16FA100M 8 10.5 32.0 0.06 30 2,740
150 16FA150M 10 10.5 48.0 0.06 28 3,260
470 16FA470M 12.5 22 150.0 0.08 20 6,080
1,000 16FA1000M 16 25 320.0 0.09 15 9,750
16 Volts
Rated
Voltage
(WVDC)
Capacitance
(µF) Catalog
†Part Number†
Nominal
Case Size*
DL (mm)
Rated
Ripple Current
(mA rms) at
45C,100kHz
Maximum ESR
(mΩ)at
20C
100k-300kHz
Maximum
Leakage
Current (µA)
at
20C
Dissipation
Factor (Tan)
20C,120Hz
33 20FA33M 6.3 9.8 13.2 0.06 70 1,710
47 20FA47M 8 10.5 18.8 0.06 40 2,450
68 20FA68M 8 10.5 27.2 0.06 36 2,600
100 20FA100M 10 10.5 40.0 0.06 30 3,210
20 Volts
†M indicates20% capacitance tolerance. Substitute code letter K in part number for
10% tolerance (available for Ø6.3,Ø8 and Ø10 only).
*The case sizes in table are with no sleeve, refer to diagram for case sizes with sleeve.
15 25FA15M 6.3 9.8 3.7 0.04 70 1,650
22 25FA22M 8 10.5 5.5 0.06 40 2,330
22 25FA22MA 10 5 11.0 0.07 70 1,600
33 25FA33M 10 10.5 8.2 0.06 35 2,900
47 25FA47M 10 10.5 11.7 0.06 35 2,980
25 Volts
220 4FA220MA 10 5 17.6 0.07 55 2,400
4 Volts
Suffix A indicates Ø105 case size products and is also used to
identify one part from another when two capacitors have the same
capacitance value and rated voltage.
Capacitance Tolerance: M=20% or
K=
10% (optional for Ø6.3,Ø8 and Ø10)
Capacitance Value: Expressed in Microfarads.An R indicates a
decimal point (e.g. 2R2= 2.2F).
Series Name: Indicates Basic Capacitor Design.
DC Rated Voltage: Expressed in Volts (e.g.10 =10WVDC).
Note: Prefix code 6 indicates 6.3WVDC products.
Part Numbering System for FA Series When ordering, always specify complete catalog number for FA Series.
10 FA 220 M A
