© 2000 IXYS All rights reserved 1 - 2
Features
●Thyristor controller for AC (circuit
W3C acc. to IEC) for mains frequency
●Package with metal base plate
●Isolation voltage 3000 V~
●Planar passivated chips
●UL applied
Applications
●Switching and control of
three phase AC circuits
●Softstart AC motor controller
●Solid state switches
●Light and temperature control
Advantages
●Easy to mount with two screws
●Space and weight savings
●Improved temperature and power
cycling
●High power density
Symbol Test Conditions Maximum Ratings
VWO 80 VWO 95
IRMS TC = 85°C, 50 - 400 Hz (per phase) 82 96 A
ITRMS TVJ = TVJM 59 69 A
ITAVM TC = 85°C; (180° sine) 37 44 A
ITSM TVJ = 45°C; t = 10 ms (50 Hz), sine 1000 1150 A
VR = 0 t = 8.3 ms (60 Hz), sine 1100 1230 A
TVJ = TVJM t = 10 ms (50 Hz), sine 900 1000 A
VR = 0 t = 8.3 ms (60 Hz), sine 1000 1100 A
I2tTVJ = 45°C t = 10 ms (50 Hz), sine 5000 6600 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 5080 6280 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 4050 5000 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 4200 5080 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 150 A 100 A/ms
f =50 Hz, tP =200 ms
VD = 2/3 VDRM
IG = 0.3 A non repetitive, IT = ITAVM 500 A/ms
diG/dt = 0.3 A/ms
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 1000 V/ms
RGK = ¥; method 1 (linear voltage rise)
PGM TVJ = TVJM tp = 30 ms10W
IT = ITAVM tp = 300 ms5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V~
IISOL £ 1 mA t = 1 s 3000 V~
MdMounting torque (M5) 5/44±15 % Nm/lb.in.
Terminal connection torque (M3; M5) 1.5/13±15 % Nm/lb.in.
Weight typ. 180 g
VRSM VRRM Type
VDSM VDRM
VV
800 800 VWO 80-08io7 VWO 95-08io7
1200 1200 VWO 80-12io7 VWO 95-12io7
1400 1400 VWO 80-14io7 VWO 95-14io7
VWO 80
VWO 95
Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
IRMS = 80/95 A
VRRM = 800-1400 V
Three Phase
AC Controller Modules
Preliminary data
3
2
19
8
7
16
14
17
1011
13
14 1 16 2 17 3
710 811 913
© 2000 IXYS All rights reserved 2 - 2
Symbol Test Conditions Characteristic Values
VWO 80 VWO 95
ID, IRTVJ = TVJM; VR = VRRM; VD = VDRM £55mA
VTIT= 150 A; TVJ = 25°C£1.65 1.57 V
VT0 For power-loss calculations only 0.85 0.85 V
rT5.2 4.8 mW
VGT VD = 6 V; TVJ = 25°C£1.0 1.0 V
TVJ = -40°C£1.6 1.6 V
IGT VD = 6 V; TVJ = 25°C£100 100 mA
TVJ = -40°C£150 150 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM £0.2 0.2 V
IGD £55mA
ILTVJ = 25°C; tP = 10 ms£200 200 mA
IG = 0.3 A; diG/dt = 0.3 A/ms
IHTVJ = 25°C; VD = 6 V; RGK = ¥ £ 150 150 mA
tgd TVJ = 25°C; VD = 1/2 VDRM £22ms
IG = 0.3 A; diG/dt = 0.3 A/ms
tqTVJ = TVJM; IT = 20 A, tP = 200 ms;
di/dt = -10 A/ms typ. 150 150 ms
VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM
RthJC per thyristor; sine 180°el 0.81 0.66 K/W
per module 0.135 0.11 K/W
RthJK per thyristor; sine 180°el 1.0 0.93 K/W
per module 0.167 0.155 K/W
dSCreeping distance on surface 8.0 mm
dACreepage distance in air 4.5 mm
aMax. allowable acceleration 50 m/s2
Dimensions in mm (1 mm = 0.0394")
VWO 80
VWO 95
