BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier (R) Major Ratings and Characteristics IF(AV) 0.5 A VRRM 50 V to 400 V IFSM 10 A trr 50 ns VF 1.25 V, 1.35 V Tj max. 175 C d* e t n Pate *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AA (GL34) Features Mechanical Data * * * * * * * Case: DO-213AA, molded epoxy over glass body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Cavity-free glass-passivated junction Ideal for automated placement Ultrafast reverse recovery time Low switching losses, high efficiency Meets environmental standard MIL-S-19500 Meets MSL level 1, per J-STD-020C Solder Dip 260 C, 40 seconds Typical Applications For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and Telecommunication Maximum Ratings TA = 25 C unless otherwise specified Parameter Symbol BYM07-50 BYM07-100 Fast efficient device: 1st band is Green Polarity color bands (2nd Band) BYM07-150 BYM07-200 BYM07-300 BYM07-400 Unit EGL34A EGL34B EGL34C EGL34D EGL34F EGL34G Gray Red Pink Orange Brown Yellow Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 C IF(AV) 0.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 10 A Maximum full load reverse current, full cycle average at TA = 55 C IR(AV) 50 A TJ,TSTG - 65 to + 175 C Operating junction and storage temperature range Document Number 88580 10-Aug-05 www.vishay.com 1 BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor Electrical Characteristics TA = 25 C unless otherwise specified Parameter Test condition Symbol BYM07-50 BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34A EGL34B EGL34C EGL34D EGL34F Unit EGL34G TA = 25 C TA = 125 C IR at 0.5 A VF Max. reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance at 4.0 V, 1 MHz CJ 7.0 pF Maximum DC reverse current at rated DC blocking 5.0 50 A voltage (1) Maximum instantaneous 1.25 1.35 V forward voltage (1) Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle Thermal Characteristics TA = 25 C unless otherwise specified Parameter Symbol BYM07-50 EGL34A BYM07-100 BYM07-150 BYM07-200 BYM07-300 BYM07-400 EGL34B EGL34C EGL34F Unit EGL34G 150 70 RJA RJT Maximum thermal resistance (1, 2) EGL34D C/W Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal Ratings and Characteristics Curves (TA = 25 C unless otherwise specified) 12 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 0.5 0.4 0.3 0.2 Resistive or Inductive Load 0.1 8 6 4 2 0 0 0 25 50 75 100 125 150 175 1 10 100 Terminal Temperature (C) Number of Cycles at 60 Hz Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 TJ = TJ max. 8.3 ms Single Half Sine-Wave 10 Document Number 88580 10-Aug-05 BYM07-50 thru BYM07-400, EGL34A thru EGL34G Vishay General Semiconductor 35 Pulse Width = 300 s 1% Duty Cycle 10 TJ = 150 C 1 TJ = 25 C 0.1 0.4 0.6 0.8 1.0 1.4 1.2 1.6 1.8 25 20 15 10 5 EGL34A - EGL34D EGL34F & EGL34G 0.01 0.2 TJ = 25 C f = 1.0 MHz Vsig = 50mVp-p 30 Junction Capacitance (pF) Instantaneous Forward Current (A) 50 0 0.1 2.0 1 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 100 Transient Thermal Impedance (C/W) Instantaneous Reverse Leakage Current (A) 100 10 Reverse Voltage (V) 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 75 C 0.01 TJ = 25 C 0.001 0 20 40 60 80 10 1 0.1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t, Pulse Duration (sec.) Figure 4. Typical Reverse Characteristics Figure 6. Typical Transient Thermal Impedance Package outline dimensions in inches (millimeters) DO-213AA (GL34) SOLDERABLE ENDS 1st BAND 2nd BAND D2 D1= 0.066 0.060 (1.676) (1.524) 0.022 (0.559) 0.016 (0.406) 0.145 (3.683) 0.131(3.327) D2 = D1 + 0 - 0.008 (0.20) 1st band denotes type and polarity 2nd band denotes voltage type Document Number 88580 10-Aug-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1