5420/4 SL199 - ALPHA WIRE

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. 5420/4

Construction

Diameters (In)

1) Component 1 4 X 1 COND

a) Conductor 20 (10/30) AWG TC 0.037

b) Insulation 0.0325" Wall, Nom. PVC 0.102

(1) Color Code Alpha Wire Color Code E

Cond Color Cond Color Cond Color

1 BLACK 3 RED

2 BROWN 4 ORANGE

2) Cable Assembly 4 Components Cabled

a) Twists: 4.0 Twists/foot (min)

b) Core Wrap Nonwoven Polyester Tape, 25% Overlap, Min.

3) Shield: Alum/Mylar Tape, 25% Overlap, Min.

a) Foil Direction Foil Facing In

b) Drain Wire 20 (7/28) AWG TC

4) Jacket 0.063" Wall, Nom.,PVC 0.381 (0.401 Max.)

a) Color(s) Slate, Black, Yellow, Orange, Blue, Green, Red, Sand Beige, White

b) Ripcord 1 End 810 Denier Nylon

c) Print

ALPHA WIRE-* P/N 5420/4 4C 20 AWG

XTRAGUARD(R) 1 (UL) MTW 600V OR AWM 2501 105C

600V OR AWM 21896 105C 600V SUN RES 60C OIL

VW-1 --- LLXXXXXX CSA AWM I/II A/B 105C 600V

FT4 CE ROHS (SEQ FOOTAGE)

* = Factory Code

[Note: Product may have c(UL) or CSA markings depending upon plant of manufacture.]

Applicable Specifications

1) UL

a) Component 1 AWM/STYLE 1015 105°C / 600 VRMS

MTW 90°C Dry / 60°C Wet / 600 VRMS

b) Overall MTW 90°C Dry / 60°C Wet / 600 VRMS

AWM/STYLE 21896 105°C / 600 VRMS

SUN RES

60C OIL

AWM/STYLE 2501 105°C / 600 VRMS

VW-1

2) CSA International

a) Component 1 TEW 105°C / 600 VRMS

b) Overall AWM I/II A/B 105°C / 600 VRMS

FT4

3) IEC EN 60332-1 Flame Behavior

EN 60332-2 Flame Behavior

4) CE: EU Low Voltage Directive 2006/95/EC

Environmental

1) CE: EU Directive 2011/65/EU(RoHS2):

This product complies with European Directive 2011/65/EU (RoHS Directive) of the European

Parliament and of the Council of 8 June 2011. No Exemptions are required for RoHS

Compliance on this item. Consult Alpha Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain Substances of Very High Concern (SVHC) listed on the European

Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,

please see Alpha's REACH SVHC Declaration.

3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of

California Proposition 65.

Properties

Physical & Mechanical Properties

1) Temperature Range -30 to 105°C

2) Bend Radius 10X Cable Diameter

3) Pull Tension 40 Lbs, Maximum

4) Sunlight Resistance Yes

Electrical Properties (For Engineering purposes only)

1) Voltage Rating 600 VRMS

2) Capacitance 31 pf/ft @1 kHz, Nominal Conductor to Conductor

3) Ground Capacitance 56 pf/ft @1 kHz, Nominal

4) Inductance 0.24 µH/ft, Nominal

5) Conductor DCR 11.5 Ω/1000ft @20°C, Nominal

6) OA Shield DCR 7.5 Ω/1000ft @20°C, Nominal

Other

Packaging Flange x Traverse x Barrel (inches)

a) 1000 FT 20 x 11 x 8 Continuous length

b) 500 FT 16 x 11 x 8 Continuous length

c) 100 FT 12 x 10 x 5 Continuous length

d) Bulk(Made-to-order)

[Spool dimensions may vary slightly]

www.alphawire.com

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

ALPHA WIRE - CONFIDENTIAL AND PROPRIETARY

Notice to persons receiving this document and/or technical information.This document is confidential and is the exclusive property of ALPHA WIRE,

and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and

agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be

copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall

EU/China ROHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number: 5420/4

5420/4 , RoHS-Compliant Commencing With 8/1/2005 Production

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European

Parliament, better known as the RoHS Directive, with regards to restrictions of the use of certain hazardous substances used in the manufacture of

electrical and electronic equipment. The reader is referred to this Directive for the specific definitions and extents of this Directive. No Exemptions

are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking

for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2006.

Substance Maximum Control Value

Lead 0.1% by weight (1000 ppm)

Mercury 0.1% by weight (1000 ppm)

Cadmium 0.01% by weight (100 ppm)

Hexavalent Chromium 0.1% by weight (1000 ppm )

Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual

usage of the product.

Authorized Signatory for the Alpha Wire Company:

Dave Watson, Director of Engineering & QA 8/6/2015

Alpha Wire

711 Lidgerwood Ave.

Elizabeth, NJ 07207

Tel: 1-908-925-8000