STPR1220CTW SUPER FAST GLASS PASSIVATED RECTIFIER REVERSE VOLTAGE - 200Volts FORWARD CURRENT - 12 Amperes FEATURES TO-220AB * Glass passivated chip * Superfast switching time for high efficiency * Low forward voltage drop and high current capability * Low reverse leakage current MECHANICAL DATA * Case: JEDEC TO-220AB * Case Material: Plastic material, UL flammability classification 94V-0 * Moisture Sensitivity: Level 1 per J-STD-020C * Terminals: Lead Free Plating * Polarity indicator: As marked on the body * Weight: 0.08 ounces, 2.24 grams * Component in accordance to RoHs 2002/95/EC * ESD capability : HBM_8KV (JESD22-A114) * Maximum mounting torque = 0.5 N.m (5.1 Kgf.cm) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL STPR1220CTW UNIT Device marking code Note STPR1220CTW --- Maximum Repetitive Peak Reverse Voltage VRRM 200 V IF 12 A Peak Forward Surge Current 8.3ms single half sine-wave IFSM 90 A Storage temperature range TSTG -55 to +150 C TJ -55 to +150 C Average Rectified Output Current See FIG.1 Operating junction temperature range PARAMETER Breakdown voltage TEST CONDITIONS IR=10uA IF=6A Forward Voltage (1) IF=12A Leakage Current VR=200V Reverse recovery time IF= 0.5A Irr= 0.25A IR =1.0A THERMAL CHARACTERISTIC Tj=25C Tj=25C Tj=125C Tj=25C Tj=125C Tj=25C Tj=100C Tj=25C SYMBOL Min. VB 200 IR ------------- trr --- 22 30 VF SYMBOL Typ. Max. UNIT --- --- V 0.98 0.84 1.08 0.95 0.05 1.50 1.10 1.00 1.25 1.20 10 250 Typical V uA ns UNIT Typical thermal resistance_Junction to Case (2) RJC 4.0 C/W Typical thermal resistance_Junction to Lead (2) RJL 6.0 C/W Note : (1) 300us Pulse Width, 2% Duty Cycle. (2) Thermal Resistance test performed in accordance with JESD-51. RJL is measured at the PIN 2, RJC is measured at the top centre of body. REV. 2, Sep-2010, KTGA25 RATING AND CHARACTERISTIC CURVES STPR1220CTW FIG.1- FORWARD CURRENT DERATING CURVE 14 FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT 100 90 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) With heatsink_75*75*2 mm copper plate 12 10 8 6 Without heatsink 4 2 80 70 60 50 40 30 20 8.3ms Single Half Sine-Wave 10 0 0 0 25 50 75 100 125 150 1 175 10 CASE TEMPERATURE, ( ) FIG.3- TYPICAL FORWARD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE 100 100 CAPACITANCE, (pF) Tj=125 10 Tj=25 1 10 Tj=25, f=1MHz 1 0.1 0.1 0.4 0.6 0.8 1 1.2 1.4 1 10 REVERSE VOLTAGE, (V) INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.5- TYPICAL REVERSE CHARACTERISTICS 10 Tj=125 INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz Tj=100 1 Tj=25 0.1 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (V) 120 100 Legal Disclaimer Notice STPR1220CTW Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.