SPEC NO: DSAA9551 REV NO: V.3 DATE: MAR/05/2005 PAGE: 1 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201001465
11mm x 1.4mm BACKLIGHT
Features
LOW POWER CONSUMPTION.
IDEAL FOR BACKLIGHTING.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
AA1114/2PBC/CC BLUE
Description
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
SPEC NO: DSAA9551 REV NO: V.3 DATE: MAR/05/2005 PAGE: 2 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201001465
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Part No. Dice Lens Type Iv (mcd)
@ 20mA
Viewing
Angle
Min. Typ. 2θ
θθθ1/2
AA1114/2PBC/CC BLUE (InGaN) WATER CLEAR 18 50 120°
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Blue 468 nm IF=20mA
λDDominant Wavelength Blue 470 nm IF=20mA
∆λ1/2 Spectral Line Half-width Blue 25 nm IF=20mA
C Capacitance Blue 65 pF VF=0V;f=1MHz
VFForward Voltage Blue 3.65 4.2 V IF=20mA
IRReverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 102 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAA9551 REV NO: V.3 DATE: MAR/05/2005 PAGE: 3 OF 3
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP: 1201001465
Remarks:
If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows:
1.Wavelength: +/-1nm (Test condition is based on the sorting standard).
2.Luminous intensity: +/-15% (Test condition is based on the sorting standard).
3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).
Blue AA1114/2PBC/CC
