UF4003-E3/4 - VISHAY - Pdf.Support

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007

www.vishay.com Vishay General Semiconductor

Revision: 15-Aug-13 1Document Number: 88755

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Ultrafast Plastic Rectifier

FEATURES

• Glass passivated chip junction

• Ultrafast reverse recovery time

• Low forward voltage drop

• Low switching losses, high efficiency

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in high frequency rectification and freewheeling

application in switching mode converters and inverters for

consumer, computer, and telecommunication.

MECHANICAL DATA

Case: DO-204AL (DO-41)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 1.0 A

VRRM 50 V, 100 V, 200 V, 400 V, 600 V,

800 V, 1000 V

IFSM 30 A

trr 50 ns, 75 ns

VF1.0 V, 1.7 V

TJ max. 150 °C

Package DO-204AL (DO-41)

Diode variations Single die

DO-204AL (DO-41)

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT

Maximum repetitive peak

reverse voltage VRRM 50 100 200 400 600 800 1000 V

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V

Maximum average forward rectified current

0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 1.0 A

Peak forward surge current 8.3 ms single half

sine-wave superimposed on rated load IFSM 30 A

Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007

www.vishay.com Vishay General Semiconductor

Revision: 15-Aug-13 2Document Number: 88755

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse test: 300 μs pulse width, 1 % duty cycle

Note

(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT

Maximum instantaneous

forward voltage 1.0 A VF (1) 1.0 1.7 V

Maximum DC reverse

current at rated DC

blocking voltage

TA = 25 °C

μA

TA = 100 °C 50

Maximum reverse

recovery time

IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 50 75 ns

Typical junction

capacitance 4.0 V, 1 MHz CJ17 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT

Typical thermal resistance RJA (1) 60 °C/W

RJL (1) 15

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

UF4007-E3/54 0.33 54 5500 13" diameter paper tape and reel

UF4007-E3/73 0.34 73 3000 Ammo pack packaging

1.0

20 40 60 80 100 120 140 160

0.5

Ambient Temperature (°C)

Average Forward Rectied Current (A)

Resistive or Inductive Load

0.375" (9.5 mm) Lead Length

110 100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= 55 °C

8.3 ms Single Half Sine-Wave

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007

www.vishay.com Vishay General Semiconductor

Revision: 15-Aug-13 3Document Number: 88755

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Leakage Characteristics

Fig. 5 - Typical Instantaneous Forward Characteristics

Fig. 6 - Typical Reverse Leakage Characteristics

Fig. 7 - Typical Junction Capacitance



0.01

0.1

100

1.00.80.60.40.2 1.2 1.4 1.6

Instantaneous Forward Current (A)

Instantaneous Forward Voltage (V)

= 150 °C

= 125 °C

= 25 °C

= 100 °C

UF4001 thru UF4004

1.0 1.2 1.4 1.6 1.80.80.60.40.2

Instantaneous Forward Voltage (V)

0.1

0.01

TJ = 150 °C

TJ = 125 °C

TJ = 25 °C

TJ = 100 °C

UF4005 thru UF4007

Instantaneous Forward Current (A)

0.001

0.01

0.1

100

0 20406080100

Percent of Peak Reverse Voltage (%)

Instantaneous Reverse Leakage

Current (μA)

= 150 °C

= 125 °C

= 25 °C

= 100 °C

UF4001 thru UF4004

0.001

0.01

0.1

100

0 20406080100

Percent of Peak Reverse Voltage (%)

Instantaneous Reverse Leakage

Current (μA)

= 150 °C

= 125 °C

= 25 °C

= 100 °C

UF4005 thru UF4007

0.1 110 100

100

Reverse Voltage (V)

Junction Capacitance (pF)

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

UF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007

www.vishay.com Vishay General Semiconductor

Revision: 15-Aug-13 4Document Number: 88755

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

DO-204AL (DO-41)

0.107 (2.7)

0.080 (2.0)

DIA.

0.034 (0.86)

0.028 (0.71)

DIA.

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.205 (5.2)

0.160 (4.1)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.