32 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
NACH 100 M 35V 5x6.3 TR 13 Y F
RoHS Compliant
97% Sn (min.), 3% Bi (max.)
330mm (13”) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%
Capacitance Code in mF, fi rst 2 digits are signifi cant
Third digit is no. of zeros, “R” indicates decimal for
values under 10μF
Series
PART NUMBER SYSTEM
Optional: Suitable for automotive equipment, sourced to special
production and inspection at TS-16949 certifi ed production site
FEATURES
• CYLINDRICAL V-CHIP CONSTRUCTION
• WIDE TEMPERATURE -40° ~+105°C
• LONG LIFE (+105°C, 2000 HOURS)
• 6.3 mm MAXIMUM HEIGHT
• DESIGNED FOR REFLOW SOLDERING
Surface Mount Aluminum Electrolytic Capacitors NACH Series
CHARACTERISTICS
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specifi c application - process details with
NIC’s technical support personnel: tpmg@niccomp.com
Rated Voltage Range 4 ~ 50Vdc
Rate Capacitance Range 0.1 ~ 220μF
Operating Temp. Range -40°C ~ +105°C
Capacitance Tolerance ±20% (M)
Max. Leakage Current
After 2 Minutes @ 20°C
0.01CV or 3μA
whichever is greater
Working Voltage/Surge Voltage
Max. Tan δ @120Hz/20°C
W.V. (Vdc) 4 6.3 10 16 25 35 50
S.V. (Vdc) 5 8.0 13 20 32 44 63
Dissipation Factor 0.50 0.30 0.22 0.16 0.14** 0.12 0.12
Low Temperature Stability
Impedance Ratio @ 120Hz
Z-40°C/Z+20°C 7432222
Z-55/Z+20°C 12864433
Load Life Test @105°C
2,000 Hours
Capacitance Change Within ±25% of initial measured value
Tan δLess than 200% of specifi ed value
Leakage Current Less than specifi ed value
Cap (μF) Code Working Voltage (Vdc)
4.0 6.3 10 16 25 35 50
0.1R10------4x6.3
0.22 R22 ------4x6.3
0.33 R33 ------4x6.3
0.47 R47 ------4x6.3
1.01R0------4x6.3
2.22R2------4x6.3
3.33R3------4x6.3
4.74R7----4x6.3 - 5x6.3
10 100 - - - 4x6.3 - 5x6.3 6.3x6.3
22 220 - 4x6.3 - 5x6.3 - 6.3x6.3 -
33 330 - 4x6.3 5x6.3 - 6.3x6.3 - -
47 470 4x6.3 5x6.3 - 6.3x6.3 - - -
100 101 5x6.3 6.3x6.3 - -- - - -
220 221 6.3x6.3 ------
STANDARD VALUES AND CASE SIZES (mm)
*See Part Number System for Details
P N bS fD il
RoHS
Compliant
includes all homogeneous materials
33
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
Case Size a b c
4 φ1.0 2.6 1.8
5 φ1.4 3.0 1.8
6.3 φ1.8 3.6 1.8
a
c
b
RECOMMENDED LAND PATTERN DIMENSIONS (mm)
Surface Mount Aluminum Electrolytic Capacitors NACH Series
DIMENSIONS (mm)
0.3mm max.
Dφ
L
+ -
II
W
P
A
B
Case Size Dφ ±0.5 L max. A ±0.2 B ±0.2 I ±0.2 W P ±0.2
4 x 6.3 4.0 6.3 4.3 4.3 1.8 0.5 ~ 0.8 1.0
5 x 6.3 5.0 6.3 5.3 5.3 2.2 0.5 ~ 0.8 1.5
6.3 x 6.3 6.3 6.3 6.6 6.6 2.5 0.5 ~ 0.8 2.2
NIC Part Number Cap.
(μF)
W.V.
(Vdc)
Dissipaton Factor
(Tan δ)
Max. Ripple Current (mA)
+105°C/120Hz
Maximum ESR (Ω)
+20OC/120Hz
Load Life Hours
@ +105°C
NACH470M4V4x6.3TR13F 47
4.0
0.50 34 17.7 2,000
NACH101M4V5x6.3TR13F 100 0.50 61 8.31 2,000
NACH221M4V6.3x6.3TR13F 220 0.50 82 3.77 2,000
NACH220M6.3V4x6.3TR13F 22
6.3
0.30 26 22.6 2,000
NACH330M6.3V4x6.3TR13F 33 0.30 29 15.1 2,000
NACH470M6.3V5x6.3TR13F 47 0.30 46 10.6 2,000
NACH101M6.3V6.3x6.3TR13F 100 0.30 71 4.98 2,000
NACH330M10V5x6.3TR13F 33 10 0.22 43 11.1 2,000
NACH100M16V4x6.3TR13F 10
16
0.16 28 26.6 2,000
NACH220M16V5x6.3TR13F 22 0.16 39 12.1 2,000
NACH470M16V6.3X6.3TR13F 47 0.16 70 5.66 2,000
NACH4R7M25V4x6.3TR13F 4.7 25 0.14 22 49.5 2,000
NACH330M25V6.3x6.3TR13F 33 0.14 65 7.05 2,000
NACH100M35V5x6.3TR13F 10 35 0.12 28 19.9 2,000
NACH220M35V6.3x6.3TR13F 22 0.12 55 9.05 2,000
NACHR10M50V4x6.3TR13F 0.1
50
0.12 1.0 1993 2,000
NACHR22M50V4x6.3TR13F 0.22 0.12 2.0 906 2,000
NACHR33M50V4x6.3TR13F 0.33 0.12 3.0 604 2,000
NACHR47M50V4x6.3TR13F 0.47 0.12 5.0 424 2,000
NACH1R0M50V4x6.3TR13F 1.0 0.12 10 199 2,000
NACH2R2M50V4x6.3TR13F 2.2 0.12 16 90.6 2,000
NACH3R3M50V4x6.3TR13F 3.3 0.12 16 60.4 2,000
NACH4R7M50V5x6.3TR13F 4.7 0.12 23 42.4 2,000
NACH100M50V6.3x6.3TR13F 10 0.12 35 19.9 2,000
RIPPLE CURRENT FREQUENCY CORRECTION FACTOR
Frequency Hz 50< f <100 100< f <1K 1K< f <10K 10K< f <100K
Correction
Factor 0.8 1.0 1.3 1.5
Review & Compare Refl ow Soldering Heat Limits
V-chip SMT Aluminum Electrolytic Capacitors
www.niccomp.com/RSL
STANDARD VALUES, CASE SIZES AND SPECIFICATIONS
For Automotive Equipment see part number system
34 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
Case Size A ± 0.5 B ± 0.5 C ± 0.3 D ± 0.1 P ± 0.1 T ± 0.2 t ± 0.2
4 x 6.3 4.7 4.7 12.0 5.5 8.0 6.4 0.6
5 x 6.3 5.7 5.7 12.0 5.5 12.0 6.4 0.6
6.x x 6.3 7.0 7.0 16.0 7.5 12.0 6.5 0.6
13∅ ±0.5
3.0 ± 0.5
330 or 380mm
50∅ Min.
21
±0.8
2.0±0.5
W
T
APFeeding
+
-
1.5∅ +0.1/- 1.75 ±
D
B
C
1.5φ+0.1/-0 1.75 + 0.15
t
4 + 0.1
EMBOSSED CARRIER DIMENSIONS (mm)
REEL DIMENSIONS AND QUANTITIES
Case Size W ± 1.0 Reel Quantity
330mm
Reel Quantity
380mm
4 x 6.3 14 1,200 1,000
5 x 6.3 14 800 1,000
6.x x 6.3 18 800 1,000
Surface Mount Aluminum Electrolytic Capacitors NACH Series
