CARDINAL COMPONENTS Ceramic Surface Mount Series CX5 * Lowest maximum drive level available * Widest frequency range * Very tight stabilities Part Numbering Example: CX5 Z - A1 - B2 - C2 60 - 10.0 D18 - 3 CX5 Z A1* SERIES ADDED FEATURES CX5 BLANK = BULK PACK Z = TAPE AND REEL B2 OPERATING TEMP. A0 = -10C ~ +60C A1 = -10C ~ +70C A2 = -40C ~ +85C A3 = -55C ~ +125C C2 60 10.0 D18 -3 STABILITY TOLERANCE RESISTANCE FREQUENCY LOAD CAP. OVERTONE B1 = 100 SEE CHART C1 = 100 D16,18,20,ETC. BLANK: FUND. -3: 3rd OT B2 = 50 BELOW C2 = 50 DS = SERIES -5: 5th OT B3 = 30 C3 = 30 -7: 7th OT B4 = 10 C4 = 10 -BT: BT Cut *NOTE: The above ABC combinations cover basic specification options. We tailor our crystal specifications to meet customer requirements. Please contact our sales department if you don't see exactly what you need. Specifications: Frequency Range: CX5 9.000 ~ 40.320 MHz 40.000 ~ 90.000 MHz 90.000 ~ 150.000 MHz AT-Cut Fundamental 3rd Overtone 5th Overtone Standard Operating Temperature: 0C ~ +70C -40C ~ +85C Frequency Stability: 50 ppm Standard Stabilities from 5 ppm available. Frequency Tolerance: (at 25C) 50 ppm Standard Tolerances from 10 ppm available. Load Capacitance: Parallel or series. Please specify your required load. Resistance: Maximum resistance corresponds to frequency. See chart below. Standard: Shunt Capacitance: 7 pF Max Aging: 3 ppm first year Drive Level: 50 W Max Packaging: Tape and Reel (1K per Reel) Bottom View Resistance Chart: All resistances are maximum values. EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency MHz 9.500~10.999 11.000~13.999 14.000~15.999 16.000~39.999 ESR() 60 Max 50 Max 40 Max 30 Max Mode/cut Fund./AT Fund./AT Fund./AT Fund./AT Frequency MHz 40.000~49.999 50.000~89.999 90.000~150.000 ESR () 80 Max 50 Max 100 Max Mode/cut 3rd Overtone/AT 3rd Overtone/AT 5th Overtone/AT Cardinal Components, Inc. 155 Route 46 West Wayne, NJ 07470 Rev: C-090414-11 C-18 TEL: (973)785-1333 E-MAIL: sales@cardinalxtal.com WEB: http://www.cardinalxtal.com