SERIES MFX MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION A B .096 2x RECEPTACLE SOCKET #1 .088 RECEPT: .195 .001 PLUG: .183 .002 PLUG PIN #1 .308 MAX .239 RECEPT .093 .003 C .270 MAX SECTION A-A RECEPT: .429 MAX PLUG: .416 MAX .120 .010 TYP FLEX A .086 TYP A .028 .010 0.017 x 0.004 FLAT LEAD .135 .105 GAP .005 MAX .018 (25 AWG) IN-LINE SURFACE MOUNT (A DOUBLE SIDED FLEX) EXTENDER CARD SEE OPTIONAL LENGTHS FLEX A B C NO. OF CONTACTS MAX BSC MAX 9 15 21 25 31 37 .785 .935 1.085 1.185 1.335 1.485 .565 .715 .865 .965 1.115 1.265 .400 .550 .700 .800 .950 1.100 RIGHT ANGLE THRU HOLE MOUNT (ENCAPSULATE AT A RIGHT ANGLE TO CONNECTOR) TERMINATION OPTIONS TOLERANCE: .XXX .005 .XX .01 ANGLE 1 CRISTEK.COM TITLE MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION DWG. NO. SHT 1 OF 3 REV MFX E 888.265.9162 SERIES MFX MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION PLUG MATING FACE 9 5 9 25 13 15 8 6 1 25 37 19 15 14 1 9 1 21 11 31 16 37 RECEPTACLE MATING FACE 12 1 21 31 6 1 17 1 9 9 1 9 5 14 1 25 20 1 20 1 15 8 15 25 13 12 1 21 17 1 31 21 11 31 16 37 19 37 MFX XXX X X X X CRISTEK FLEX TERMINATION MICRO-D CONNECTORS (MATE WITH M83513) TERMINATION IN-LINE SURFACE MOUNT (PLUG ONLY) (.017 x .004 FLAT LEAD, PRE-SOLDER DIPPED) 1 = .105 - .135 INCH RIGHT-ANGLE THRU HOLE MOUNT (PLUG OR RECEPTACLE) (26 AWG SOLID PRE-SOLDER DIPPED) 2 = 0.06 INCH 3 = 0.09 INCH 4 = 0.12 INCH 5 = EXTENDER CARD NUMBER OF CONTACTS 009 025 015 031 021 037 GENDER P = PLUG, PIN CONTACTS S = RECEPTACLE, SOCKET CONTACTS HARDWARE 0 = NONE FACTORY INSTALLED (NON-REMOVABLE) J = HIGH PROFILE HEX DRIVE JACKSCREW F = FLOAT MOUNT K = HIGH PROFILE SLOTTED JACKSCREW L = LOW PROFILE HEX DRIVE JACKSCREW * T = THREADED INSERT M83513 HARDWARE - FACTORY INSTALLED 2 = LOW PROFILE HEX DRIVE JACKSCREW * 3 = HIGH PROFILE HEX DRIVE JACKSCREW 5 = LOW PROFILE SLOTTED JACKSCREW * 6 = HIGH PROFILE SLOTTED JACKSCREW 7 = JACKPOST KIT * SHELL FINISH A = CADMIUM B = NICKEL C = ANODIZE D = CHEM FILM E = BLACK CADMIUM G = GOLD * = MOST COMMONLY USED & STOCKED HARDWARE OPTIONS MATERIALS AND FINISHES ARE IAW MIL-DTL-83513 FOR DETAILS SEE MIL SPEC OR WWW.CRISTEK.COM 1. MATERIALS: SHELL - ALUMINUM ALLOY INSULATOR - GLASS FILLED THERMOPLASTIC INTERFACIAL SEAL - FLUOROSILICONE BLEND PIN/SOCKET CONTACT - COPPER ALLOY 2. FINISH: SHELL - SEE OPTIONS ABOVE CONTACT - GOLD OVER NICKEL TOLERANCE: .XXX .005 .XX .01 ANGLE 1 CRISTEK.COM TITLE 3. SPECIFICATIONS: CURRENT RATING ------------------ 3 AMPS MAX TEMPERATURE RATING ---------- -55 C TO +125 C INSULATION RESISTANCE ------- 5000 MEGOHMS MIN DWV AT SEA LEVEL ---------------- 600 VAC DWV AT 70,000 FT ALTITUDE --- 150 VAC CONTACT RETENTION ------------ 5 lb MINIMUM AXIAL LOAD ENGAGEMENT FORCE ------------ 6 oz MAX SEPARATION FORCE -------------- 0.5 oz MIN MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION 4. ADDITIONAL INFORMATION: DESIGN AND PERFORMANCE IN GENERAL ACCORDANCE WITH M83513 WHERE APPLICABLE. FOR OTHER TERMINATIONS, CONTACT CRISTEK. DWG. NO. SHT 2 OF 3 REV MFX E 888.265.9162 SERIES MFX MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION .025 .125 .035 IN-LINE SURFACE MOUNT PAD DIMENSIONS .086 .070 .030 EXTENDER CARD PAD DIMENSIONS TOLERANCE: .XXX .005 .XX .01 ANGLE 1 CRISTEK.COM TITLE MICRO-D METAL SHELL FLEX CIRCUIT TERMINATION DWG. NO. SHT 3 OF 3 REV MFX E 888.265.9162