8T SERIES
Low Prole Bayonet Connectors
MIL-DTL-38999 Series II
3
8T Series | Low Prole Bayonnet Connectors
Presentation
Contents
38999 bayonet circular connector for more compacity
The design and performances of the 8T connectors meet the most severe requirements set for applications in
military and civil aerospace. With the increasing requirement for Space, Weight and Power (SWaP) reduction,
SOURIAU has more than doubled its 8T range. It features:
• Lower prole design: Lightweight, space saving (30% shorter compared to 8LT Series)
• High reliability: EMI shielding, excellent shock vibration and uid resistance, QPL approuved
• A high contact density: From 1 to 128 contacts
• A wide range: 11 different shells available, 43 layouts available from size 8 to 24
Typical applications .......................................... 6
Features & Benets .......................................... 7
A large offer ..................................................... 8
Main characteristics ......................................... 9
A versatile range available ............................... 9
A universal product platform ............................ 10
Contact layouts ................................................ 13
Overview
Technical features ............................................. 16
Ordering information ....................................... 17
Dimensions ...................................................... 19
Aluminum backshells ........................................ 24
Aluminum protective caps ............................... 27
Standard Series
Contacts / Filler plugs ...................................... 30
Tooling / Wiring instruction .............................. 31
Gaskets ............................................................. 33
Orientations ...................................................... 33
Dummy receptacles .......................................... 33
Backshells assembly ......................................... 34
Coordinates for PC tail contacts ....................... 36
Cross reference list ........................................... 45
Common Section
Box mount interconnect solutions ................... 48
Rack and panel ................................................. 48
microComp® Series .......................................... 49
Double ange .................................................. 49
Integrated clinch nut or helicoils ...................... 50
PC tail contacts without shoulder ..................... 50
Range Extension
8T SERIES
© 2019 SOURIAU - SOURIAU is a registered trademark
Overview
8T Series
Typical applications ................................................................................................ 6
Features & Benets ................................................................................................ 7
A large offer ............................................................................................................ 8
Main characteristics ................................................................................................ 9
A versatile range available ..................................................................................... 9
A universal product platform .................................................................................. 10
Worldwide sales network ........................................................................................ 10
Contact layouts ....................................................................................................... 11
Contact layouts (matrix) .......................................................................................... 13
6
8T Series | Overview
Typical applications
Civil and Military Aerospace
Communication Equipment
Marine Equipment
Missiles and Weapon Systems
Medical Instrumentation
Armored Carrier and Tanks
© Mikhail / Shutterstock
© Dell / Fotolia © JPS / Fotolia © Aleksey Stemmer / Fotolia
© Gennadiy Poznyakov / Fotolia
© Dougg / Fotolia
7
8T Series | Overview
Features & Benets
QPL
QUICK
MATING
LOW
PROFILE
LARGE
OFFER
RoHS
MIL-DTL-38999 Qualied
38 qualied layouts.
High reliability: EMI shielding, excellent shock vibration
and uid resistance.
Versatility
11 different shells, 43 layouts available from size 8 to 24.
High contact density: from 1 to 128 contacts.
Crimp contacts with rear release and a retainer metallic clip.
Environment friendly
RoHS black zinc nickel plating available.
RoHS nickel plating available.
Space and weight saving
Lower prole connector design: integrated backshell and
short grommet versions.
30% shorter compared to 38999 Series I.
Fast and secure mating
Bayonet quick coupling system.
Audible, sensitive and visible coupling.
8
8T Series | Overview
A large offer
8T5
MS27484T
8T15
Plug with
grounding ring
Plug without
grounding ring
8T6
MS27473T
8T16
Backshells
6 styles of backshells,
Straight or right angle,
4 platings available
Please see page 24.
Metalic caps
Caps for plug or receptacle,
Cord with eyelet or ring
2 platings available
Please see page 27.
Square ange receptacle
front mounting In line receptacle
Jam nut receptacle
Square ange receptacle
rear mounting
8T0
MS27472T
8T4
MS27499E
8T10
8T3
MS27497T
8T2
MS27508E
8T1
8T7
MS27474T
PLUGS RECEPTACLES
PC T ail
receptacles
available
ACCESSORIES
9
8T Series | Overview
Main characteristics
Shell size comparison
8T Series shorter for all shell
types compared to 8LT Series
Space
Saving
8T
38999 Series ll
Example: 8T5
8LT
38999 Series l
Example: 8LT5
30
%
Shorter
Short grommet Integrated backshell With accessory threads
Receptacle Receptacle Plug Receptacle Plug
Square
ange
+
Rear
mounting
Square
ange
+
Front
mounting
Square
ange
+
Front
mounting
With
grounding
ring
Without
grounding
ring
Square
ange
+
Front
mounting
Square
ange
+
Rear
mounting
In line Jam nut
With
grounding
ring
Without
grounding
ring
8T2 8T4 8T10 8T15 8T16 8T0 8T3 8T1 8T7 8T5 8T6
A versatile range available
Box
Solutions
Versatility
Square flange rear mounting,
Square flange front mounting,
Integrated backshell,
Jam nut receptacle
FROM YOUR NEED...
...TO OUR SOLUTION!
10
8T Series | Overview
. High density
. Lightweight version of Series I
. Scoop proof, bayonet coupling
. Mounting: screws or jam nut
. Shell: Aluminum alloy
. Plating: Cadmium or nickel
. VG 96912 German specification
. JN 1003 Typhoon specification
. High density MIL-spec circular
. Scoop proof, fast screw coupling
. Composite light-weight version
. Hermetic version
. QPL approved
. Quadrax and ELIO® version
. Specific design: clinch nuts,
high power, double flange, ...
. High density MIL-spec circular
. Scoop proof
. Bayonet coupling
. Mounting: screws or jam nut
. Shell: Aluminum alloy
. Plating: Cadmium or nickel
. QPL approved
. Numerous layouts
A universal product platform
38999
Series I
MIL-DTL-38999
8LT Series
38999
Series III
MIL-DTL-38999
8D Series
VG96912 &
JN1003
8ST Series
SOURIAU-SUNBANK is recognized as one of the top international manufacturers of
connectors for harsh environment and is continuously strengthening its leading
position through its solid structure as an international group. Today the SOURIAU-
SUNBANK group has a strong worldwide global presence on 4 continents.
Our international presence is reinforced by franchised and value added distributors
in many countries. We also rely upon an extensive network of distributors and
resellers worldwide. This coverage, together with a strong commitment towards
service, ensures rapid responses to the specic needs of our customers.
Worldwide sales network
Operations and Sales Ofces
Value Added Distributors and Franchised
Please consult our
"8D Series MIL-DTL-38999 Series III /
EN3645" online catalog on:
www.souriau.com
Please consult our
"8LT Series MIL-DTL-38999 Series I"
online catalog on:
www.souriau.com
Please consult our
"8ST Series VG96912 / JN1003"
online catalog on:
www.souriau.com
11
8T Series | Overview
Contact layouts
* Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us.
** Layout not available on 8T2 & 8T4 (short grommet) / Layout available on other types (long
grommet) but only with male insert. For female version or short grommet, please consult us.
Contact #22D
Contact #20
Contact #16
Contact #12
08
6#22D
Service M
3#20
Service I
35 98
10
7#20
Service I
6#20
Service I
5#20
Service I
05* 98 99
13#22D
Service M
35
12
4#16
Service I
6#22D
2#12
Service M
10#20
Service I
22#22D
Service M
8#20
Service I
04* 08** 35 98
26*
3#16
Service I
03
14
5#16
Service II
8#20
4#16
Service I
37#22D
Service M
19#20
Service I
18#20
Service I
14#20
1#16
Service I
05* 18* 19* 35 97*
15*
16
26* 35 99
2#16
21#20
Service I
6#12
or 6#12 Coax
Service I
08*
8#16
Service II
26#20
Service I
55#22D
Service M
06
12
8T Series | Overview
20
16#16
Service II
41#20
Service I
37#20
2#16
Service I
79#22D
Service M
11#12
Service I
11* 16 35 39 41
22
53#20
Service I
55#20
Service I
100#22D
Service M
21#16
Service II
21* 35 53* 55
32#20
Service I
32
24
61#20
Service I
128#22D
Service M
29#16
Service I
12#12
12#16
Service I
19#12
Service I
19* 24* 29* 35 61*
48#20
8#16
Service I
04
* Layout not available on 8T2 & 8T4 (short grommet). On demand only, please consult us.
Contact #22D
Contact #20
Contact #16
Contact #12
35
11#16
Service II
32#20
Service I
66#22D
Service M
26#20
2#16
Service I
28
11* 32
18
13
8T Series | Overview
Contact layouts (matrix)
OK SOURIAU's layout
Q SOURIAU's layout & layout according to corresponding norm
(1) Not qualied for short grommet version (8T2 & 8T4)
(2) Not qualied for 8T4 short grommet version
Shell Size Layout Service 8T MIL-DTL-38999
(QPL) HE309 Number of
Contacts #22D #20 #16 #12
08 08-35 M OK Q Q 6 6
08-98 I OK Q Q 3 3
10
10-05 I OK Q (1) 5 5
10-35 M OK Q Q 13 13
10-98 I OK Q Q 6 6
10-99 I OK Q 7 7
12
12-03 I OK Q 3 3
12-04 I OK Q (1) Q 4 4
12-08 I OK 8 8
12-26 M OK 8 6 2
12-35 M OK Q Q 22 22
12-98 I OK Q Q 10 10
14
14-05 II OK Q (1) Q 5 5
14-15 I OK Q (1) 15 14 1
14-18 I OK Q 18 18
14-19 I OK Q 19 19
14-35 M OK Q Q 37 37
14-97 I OK Q Q 12 8 4
16
16-06 I OK Q Q 6 6 or 6 Coax
16-08 II OK Q (1) Q 8 8
16-26 I OK Q (1) Q 26 26
16-35 M OK Q Q 55 55
16-99 I OK Q Q 23 21 2
18
18-11 II OK Q (1) Q 11 11
18-28 I OK Q 28 26 2
18-32 I OK Q Q 32 32
18-35 M OK Q Q 66 66
20
20-11 I OK 11 11
20-16 II OK Q Q 16 16
20-35 M OK Q Q 79 79
20-39 I OK Q (2) Q 39 37 2
20-41 I OK Q Q 41 41
22
22-21 II OK Q (1) Q 21 21
22-32 I OK Q 32 32
22-35 M OK Q Q 100 100
22-53 I OK Q 53 53
22-55 I OK Q 55 55
24
24-04 I OK Q 56 48 8
24-19 I OK Q (1) Q 19 19
24-24 II OK Q (1) 24 12 12
24-29 I OK Q (1) Q 29 29
24-35 M OK Q Q 128 128
24-61 I OK Q (1) Q 61 61
8T SERIES
© 2019 SOURIAU - SOURIAU is a registered trademark
Standard Series
8T Series
Technical features ................................................................................................... 16
Ordering information .............................................................................................. 17
Dimensions:
Plugs: 8T5, 8T15, 8T6 & 8T16 types ................................................................. 19
In line receptacle: 8T1 type ............................................................................... 20
Jam nut receptacle: 8T7 type ............................................................................ 20
Square ange receptacles: 8T0, 8T2, 8T3, 8T4 & 8T10 types ........................... 21
Receptacle with straight PC tail contacts ................................................................ 23
Mated/unmated connectors ................................................................................... 23
Aluminum backshells .............................................................................................. 24
Aluminum protective caps ...................................................................................... 27
16
8T Series | Low Prole Bayonnet Connectors
Mechanical
• Shell: Aluminum alloy
• Plating:
Black zinc nickel (Z)
Nickel (F)
Olive green cadmium (B)
Hard anodized (C)
• Insulator: Thermoplastic
• Grommet and seal: Silicone elastomer
• Contact: Copper alloy
• Plating: Gold over nickel
• Endurance:
500 mating cycles
• Shock: 300g, 3ms duration
• Vibration:
Random 100 to 1000Hz - 1g2/Hz
• Contact retention (mini force in N):
Size 22D: 44N Size 16: 110N
Size 20: 67N Size 12: 110N
Electrical
• Test voltage (Vrms):
• Contact resistance:
Size 22D: 14.6mΩ
Size 20: 7.3mΩ
Size 16: 3.8mΩ
Size 12: 3.5mΩ
• Insulation resistance:
≥ 5000MΩ (at 500Vdc)
• Contact rating:
Size 22D: 5A Size 16: 13A
Size 20: 7.5A Size 12: 23A
• Shell continuity (with EMI ring):
Black zinc nickel plating: 2.5mΩ
Olive green plating: 2.5mΩ
Nickel plating: 1mΩ
Environmental
• Temperature range:
Zinc nickel plating (Z): -65°C +175°C
Cadmium plating (B): -65°C +175°C
Nickel plating (F): -65°C +200°C
Hard anodized (C): -65°C +200°C
• Sealing (mated connectors):
Differential pressure 1 bar
Leakage ≤ 8cm3/h
• Salt spray to:
MIL-STD 1344 method 1001:
. 500 hours (plating B & Z)
. 48 hours (plating F & C)
NFC 93422: 48 hours (plating F & C)
• Damp heat:
MIL-C 38999: 10 cycles (24 hours)
NFC 93422: 56 days
• Resistance to uids:
To MIL-L 38999:
MIL-L 7808, MIL-L 23699, MIL-H 5606,
MIL-A 8243, MIL-C 87936, MIL-G 3056,
MIL-T 5624 (JP5); hydraulic uids; solvents
To NFC 93422:
F 46, F 54, 0/180, H 515, H 542, XH 45
Description
• Low prole / No scoop proof
• Bayonet locking system
• 11 shell types
• 43 layouts
• High density connector from 1 to 128 contacts
• Excellent shock vibration and uid resistance
• QPL qualied
• Standards:
- MIL-C 38999 Series II
- NFC 93422 HE 309
- VG 96912 Series II
- PAN 6433-1
- BS 9522 N 003
Technical features
Service Sea level at 21 000 m
M 1300 800
I 1800 1000
II 2300 1000
17
8T Series | Low Prole Bayonnet Connectors
Basic Series 8T 0 - 14 B 35 P N
Shell type:
0: Square ange receptacle (front mount with accessory threads)
1: In line receptacle (with accessory threads)
2: Square ange receptacle (rear mount without accessory threads)
3: Square ange receptacle (rear mount with accessory threads)
4: Square ange receptacle (front mount without accessory threads)
5: Plug with RFI shielding
6: Plug without RFI shielding
7: Jam nut receptacle (with accessory threads)
10: Square ange receptacle (front mount, rear knurling)
15: Plug with RFI shielding (rear knurling)
16: Plug without RFI shielding (rear knurling)
Contact style: (for more information please see page 30)
-: Connectors with standard crimp contacts
L: Receptacle with long PC tail
C: Receptacle with short PC tail
P: Receptacle with solder cup
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Plating:
Z: Black zinc nickel
F: Nickel
B: Olive drab cadmium
C: Hard anodized
Contact layout: See pages 11 to 13
Contact type:
P: Pin
S: Socket
A: Connector supplied less pin contact or with specic contacts (connector marking : A + orientation)
B: Female connector without contact or with special contacts (connector marking : B + orientation)
Orientation: N, A, B, C & D
Special custom:
None: Standard plastic cap
M: Antistatic plastic cap
L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L)
Ordering information
SOURIAU part number
18
8T Series | Low Prole Bayonnet Connectors
MIL-DTL-38999 Series II part number
HE309 Series part number
Basic Series MS 27497T 14 B 35 P
Shell type & Class:
27472T: Square ange receptacle (front mount with accessory threads)
27508E: Square ange receptacle (rear mount without accessory threads)
27497T: Square ange receptacle (rear mount with accessory threads)
27499E: Square ange receptacle (front mount without accessory threads)
27484T: Plug with RFI shielding
27473T: Plug without RFI shielding
27474T: Jam nut receptacle (with accessory threads)
27472E: Square ange receptacle (front mount, with accessory threads and backnut)
27484E: Plug with RFI shielding (with accessory threads and backnut)
27473E: Plug without RFI shielding (with accessory threads and backnut)
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Plating:
Z: Black zinc nickel
B: Olive drab cadmium
F: Nickel
Contact layout: See pages 11 to 13
Contact type:
P: Pin
S: Socket
A: Connector supplied less pin contact or with specic contacts (connector marking : A + orientation)
B: Female connector without contact or with special contacts (connector marking : B + orientation)
Orientation:
empty: N
A, B, C & D
L: For P and S contact type only, connector delivered without contacts, connector marking P or S (without L)
Basic Series HE309 03 T 10 35 P N 6 L
Shell type:
03: Square ange receptacle with thread for back tting
05: Square ange receptacle without thread for back tting
06: Plug without RFI shielding
07: Jam nut receptacle
Class:
T: Sealed
Shell size: 08; 10; 12; 14; 16; 18; 20; 22; 24
Contact layout: See pages 11 to 13
Contact type:
P: Pin
S: Socket
Orientation: N, A, B, C & D
Plating:
6: Nickel
7: Olive drab cadmium
8: Hard anodized
Specication
-: Connector delivered with contacts
L: Connector delivered without contacts
19
8T Series | Low Prole Bayonnet Connectors
Note: All dimensions are in millimeters (mm)
Plug 8T5 type & 8T15 type
Dimensions
8T5 type
Plug with
accessories thread,
with grounding ring
8T15 type
Plug with
integrated backshell,
with grounding ring
A
8T5 type
ØB
8T5/8T15 types
C
8T15 type
Plug 8T6 type & 8T16 type
Shell size 08 10 12 14 16 18 20 22 24
AMin. 21.31 21.31 21.31 21.31 21.31 21.31 21.31 21.31 21.31
Max. 22.65 22.65 22.65 22.65 22.65 22.65 22.65 22.65 22.65
ØB ±0.1 19.03 21.78 26.13 29.33 32.48 35.28 38.83 41.63 44.83
CMin. 23.43 23.43 23.43 23.43 23.43 23.43 23.43 23.43 23.43
Max. 23.63 23.63 23.63 23.63 23.63 23.63 23.63 23.63 23.63
8T6 type
Plug with
accessories thread,
without grounding ring
8T16 type
Plug with
integrated backshell,
without grounding ring
ØB
8T6/8T16 types
C
8T16 type
A
8T6 type
Shell size 08 10 12 14 16 18 20 22 24
AMin. 21.26 21.26 21.26 21.26 21.26 21.26 21.26 21.26 21.26
Max. 22.59 22.59 22.59 22.59 22.59 22.59 22.59 22.59 22.59
ØB+0 19 21.75 26.10 29.30 32.45 35.25 38.80 41.60 44.80
CMin. 23.38 23.38 23.38 23.38 23.38 23.38 23.38 23.38 23.38
Max. 23.57 23.57 23.57 23.57 23.57 23.57 23.57 23.57 23.57
-0.15
20
8T Series | Low Prole Bayonnet Connectors
Note: All dimensions are in millimeters (mm)
In-line receptacle 8T1 type
Dimensions
Jam nut receptacle 8T7 type
11.28 ±0.06 9.08 ±0.79
1.57 ±0.08 ØD
ØA
ØB
C
8T1 type
In line receptacle
with accessories thread
Shell size 08 10 12 14 16 18 20 22 24
ØA ±0.07 13.19 16.14 20.43 23.65 26.78 29.95 33.13 36.30 39.50
ØB ±0.08 11.96 14.93 19.00 22.17 25.35 28.52 31.70 34.87 38.05
C ±0.25 14.38 18.68 21.98 25.38 27.58 31.11 34.38 37.78 41.78
ØD ±0.27 17.80 22.10 25.40 28.80 31.00 34.40 37.80 41.20 45.20
A B D
ØF
ØC
Max. panel
thickness: 2.8 2.5 ±0.22
E
G
ØH
Panel cut-out
8T7 type
Jam nut receptacle
with accessories thread
Shell size 08 10 12 14 16 18 20 22 24
A ±0.12 11.13 11.13 11.13 11.13 11.13 11.13 11.79 11.79 11.79
B ±0.99 8.36 8.36 8.36 8.36 8.36 8.36 7.70 7.70 7.70
ØC ±0.08 12.01 14.98 19.05 22.22 25.40 28.57 31.75 34.92 38.10
D27.40 30.61 33.75 36.96 40.10 43.31 46.45 51.23 54.41
E ±0.37 31.85 35.02 38.20 41.37 45.34 48.10 51.30 54.46 57.63
ØF ±0.32 35.05 38.24 41.42 44.59 49.36 51.35 54.50 57.55 60.85
G 0 21.08 24.26 27.53 30.68 33.86 37.06 40.03 43.21 46.38
ØH +0.25 22.46 25.58 28.80 31.98 35.15 38.28 41.50 44.68 47.85
Max tightening
torque (mN) 9 10 13 20 23 25 26 27 29
-0.25
0
21
8T Series | Low Prole Bayonnet Connectors
Dimensions
Note: All dimensions are in millimeters (mm)
Square ange receptacle 8T0 type, 8T4 type & 8T10 type
8T0/8T4/8T10 types
C
D
ØE
Panel cut-out
ØG
D
D
8.12 ±0.07 12.25 ±0.79
1.57 ±0.08
B
ØA
8T0 type
Square ange
receptacle with
accessories thread,
front mounting
8.12 ±0.07 7.8
1.57 ±0.08
B
ØA
8T4 type
Square ange
receptacle with
short grommet,
front mounting
8T0 type 8T4 type 8T10 type
8.12 ±0.07 13.85 ±0.05
1.57 ±0.08
B
ØA
8T10 type
Square ange
receptacle with
integrated backshell,
front mounting
Shell size 08 10 12 14 16 18 20 22 24
ØA ±0.08 12.96 14.93 19.00 22.17 25.35 28.52 31.70 34.87 38.05
B Max. 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27
CMin. 20.52 23.73 26.11 28.50 30.86 33.22 36.42 39.60 42.77
Max. 21.03 24.23 26.59 28.98 31.34 33.73 36.91 40.08 43.26
D15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93
ØE Min. 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.71
Max. 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99
ØF 14.15 17.32 21.69 24.87 28.04 31.22 34.39 37.57 40.74
ØG ±0.15 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91
22
8T Series | Low Prole Bayonnet Connectors
Dimensions
Note: All dimensions are in millimeters (mm)
Square ange receptacle 8T2 type & 8T3 type
8T2/8T3 types
ØF
E
D
8T2 type
ØA
ØB
C
1.63 ±0.09
11.29 ±0.07
4.74 ±0.12
8T3 type
ØA
ØB
C
1.63 ±0.09
11.29 ±0.07 9.08 ±0.79
8T3 type
Square ange
receptacle with
accessories thread,
rear mounting
8T2 type
Square ange
receptacle with
short grommet,
rear mounting
Panel cut-out
ØG
E
E
ØH
Shell size 08 10 12 14 16 18 20 22 24
ØA ±0.08 13.25 16.20 20.49 23.71 26.84 30.01 33.19 36.36 39.56
ØB ±0.09 12.02 14.99 19.06 22.25 25.41 28.58 31.76 34.93 38.11
C Max. 3.71 3.71 3.71 3.71 3.71 3.71 4.27 4.27 4.27
DMin. 20.57 23.78 26.16 28.55 30.91 33.27 36.47 39.65 42.82
Max. 21.10 24.31 26.69 29.08 31.71 34.10 37.28 40.45 43.63
E15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.93
ØF Min. 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.08 3.71
Max. 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.99
G ±0.15 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.25 3.91
ØH Min. 14.15 17.32 21.69 24.87 28.04 31.22 34.39 37.57 40.74
23
8T Series | Low Prole Bayonnet Connectors
Dimensions
Note: All dimensions are in millimeters (mm)
Receptacle with straight PC tail contacts
Mated/unmated dimensions
ØA
L
D
ØA
ØA
L
B
L
C
M: Male contact, F: Female contact, C: Short PC tail, L: Long PC tail
8T7 type
with 8T5/8T15/8T6/8T16 types
8T1 type
with 8T5/8T15/8T6/8T16 types
8T2/8T3 types
with 8T5/8T15/8T6/8T16 types
8T0/8T4/8T10 types
with 8T5/8T15/8T6/8T16 types
A
B
A
B
A
B
A
B
Contact style Shell size
Size Type Length 08 to 18 20 to 24
L -0.20
#22D M / F L 8.50
#22D M / F C 4.00
#20 / #16 / #12 M / F C 5.10
ØA -0.05
#22D / 20 M / F C / L 0.70
#16 M / F C / L 1.15
#12 M / F C / L 2.05
B
8T0/8T10
types
#22D M C / L 15.05
#22D F L 15.05
#20 / #16 M C 15.22
#12 M C 15.22
C
8T3 type
#22D M C / L 13.40
#22D F L 13.40
#20 / #16 M C 13.57
#12 M C 13.57
D
8T7 type
#22D M C / L 13.61 12.95
#22D F L 13.61 12.95
#20 / #16 M C 13.78 13.12
#12 M C 13.78
0
0
Shell
size
8T7 type jam nut receptacle 8T1 type in-line receptacle
8T2/8T3 types square ange receptacle 8T0/8T4/8T10 types
square ange receptacle
With plug
8T5
With plug
8T6
With plug
8T15
With plug
8T16
With plug
8T5
With plug
8T6
With plug
8T15
With plug
8T16
With plug
8T5
With plug
8T6
With plug
8T15
With plug
8T16
A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max. A
Max. B
Max.
08 to
18 27.68 33.86 27.74 33.92 28.65 34.83 28.71 34.89
27.77 33.95 27.83 34.01 28.74 34.92 28.80 34.98 24.60 30.78 24.66 30.64 25.57 31.75 25.63 31.81
20 to
24 28.34 34.52 28.40 34.58 29.31 35.49 29.37 35.55
24
8T Series | Accessories
Aluminum backshells
Ordering information
Aluminum backshell Type 01 - Backnut
9.65 Max
(Self locking type)
6.35 Max
(Non self locking type)
Thread
ØB
ØA
Thread: See page 27 for information.
Dimensions
Basic Series 8T AB 05 A 16 W S 01 -
Accessories type
Type:
01: Backnut
02: Cable clamp
03: Shrink boot
04: Crimp ring
05: Band lock
06: Double cone
Angle:
A: Straight
B: 90° (Type 02 only)
Shell size:
08, 10, 12, 14, 16, 18, 20, 22, 24
Finish:
Z: Black zinc nickel
W: Olive green cadmium
F: Nickel
A: Black anodized
Self locking option:
None
S: Self locking (available for Types 01 & 02 - mandatory for Type 05)
Cable entry (Type 05 only):
01, 02 (02 mandatory for shell size 08 & 10)
Drain hole option:
None
D: Drain hole (Type 03 only)
Shell
size ØA Min ØB Max
08 6.7 17.9
10 9.95 20.9
12 12.85 24.3
14 17.0 27.9
16 19.25 31.3
18 21.7 35.3
20 24.7 38.1
22 27.8 41.5
24 32.0 44.5
Note: All dimensions are in millimeters (mm)
Assembly instructions
Please see "Common Section" p.34 for assembly instructions and Band-it.
25
8T Series | Accessories
Aluminum backshell Type 02 - Cable clamp
Aluminum backshell Type 03 - Shrink boot
Thread
ØB
ØA
Thread
ØA
ØB
C
D
C
F
E
Thread: See page 27 for information.
A Angle - straight B Angle - 90°
18 Max
Thread
ØB
ØA
ØC
Thread: See page 27 for information.
Shell
size
ØA ØB Max C Max D Max E Max F Max
Min Max
08 2.49 5.94 17.9 21.5 23.1 29.5 20
10 3.89 5.94 20.9 21.5 23.1 29.5 21.5
12 4.83 8.33 24.3 24.5 25.6 31.5 23.5
14 6.60 11.61 27.9 27.5 26.9 35.8 25.5
16 7.19 15.6 31.3 31.5 29.4 40.1 27.5
18 8.26 16.1 35.3 35.5 35.8 40.6 30.5
20 8.71 17.73 38.1 37 38.3 42.7 31.5
22 9.68 20.9 41.5 40.5 42.1 46.2 34.5
24 10.62 21.67 44.5 45 44.7 49 36.5
Shell
size ØA Min ØB Max C Max
08 6.7 19.0 11.3
10 9.95 21.5 14.9
12 12.85 25.3 17.8
14 16.05 29.1 21.27
16 19.2 31.7 24.3
18 21.5 35.5 26.4
20 24.7 39.3 30.8
22 27.8 41.8 34.1
24 31 46.9 36.6
Aluminum backshells
Note: All dimensions are in millimeters (mm)
26
Aluminum backshell Type 06 - Double cone
HE 308 standard - Screen termination and heat shrink boot
8T Series | Accessories
Aluminum backshells
Note: All dimensions are in millimeters (mm)
Aluminum backshell Type 04 - Crimp ring
Aluminum backshell Type 05 - Band lock
22 Max
Thread
ØB
ØA
Thread: See page 27 for information.
Shell size ØA Min ØB Max
08 6 17.9
10 8.2 20.9
12 10.5 24.3
14 13.6 27.9
16 16.9 31.3
18 20 34.3
20 23.2 38.1
22 26.1 41.5
24 28.1 44.4
34 Max
Thread
ØB
ØA
Thread: See page 27 for information.
Shell size ØA Max - Entry size ØB Max
01 02
08 - 6.6 17.9
10 - 8 24.9
12 8 11.2 29.3
14 11.2 14.4 32.4
16 12.8 16 35.6
18 16 19.1 38.4
20 16 20.7 41.6
22 17.6 23.9 44.8
24 19.1 25.5 47.9
ØB
ØC
ØA
D
30.00 Max
Thread
Shell size ØA±0.07 ØB±0.12 ØC±0.12 D±0.07
08 7.1 15.55 19.35 16.7
10 10.25 18.45 23.35 20.7
12 13.05 21.85 25.35 22.7
14 15.25 25.05 28.35 25.7
16 18.45 28.05 31.35 28.7
18 20.65 31.05 34.35 31.7
20 23.85 34.45 38.35 35.7
22 26.95 37.45 41.35 38.7
24 30.15 40.75 44.35 41.7
Thread: See page 27 for information.
27
Dimensions
Aluminum protective caps
Ordering information
8T Series | Accessories
Recommended installation torque
Note: Torque values are based on 80% of the coupling
thread strength specied in SAE-AS85049 standard.
Shell Size Installation Torque
(Inch-Pounds)
08 to 18 40
20 to 24 80
A A A
B
B
C
D
D
E
F F F
Cap for receptacle
Type 01
Cap for receptacle
Type 02
Cap for plug
Type 01
Note: All dimensions are in millimeters (mm)
Aluminum backshells
Thread information
Shell size UNEF Thread
08 7/16-28 2B
10 9/16-24 2B
12 11/16-24 2B
14 13/16-20 2B
16 15/16-20 2B
Shell size UNEF Thread
18 1 1/16 -18 2B
20 1 3/16 -18 2B
22 1 5/16 -18 2B
24 1 7/16 -18 2B
Basic Series 8T E 01 B 14
Cap type:
E: Cap for receptacle
F: Cap for plug
Fixing type:
Cap for receptacle
01: Plastic sleeved metal cord with eyelet
02: Plastic sleeved metal cord with ring
Cap for plug
01: Plastic sleeved metal cord with eyelet
Plating:
B: Olive green cadmium
F: Nickel
Shell size: 08, 10, 12, 14, 16, 18, 20, 22, 24
Shell size 08 10 12 14 16 18 20 22 24
Ø A Max. 20.83 20.83 20.83 20.83 20.83 20.83 20.83 20.83 20.83
B Max. 19.05 21.82 26.19 29.36 32.54 35.71 38.89 41.68 44.86
Ø C Max. 18.29 21.59 25.40 28.70 31.75 35.05 38.10 41.40 44.45
Ø D 3.12 3.12 3.12 3.12 3.12 3.12 3.12 3.12 3.53
Ø E 22.61 25.65 28.96 32.00 35.31 38.35 41.66 44.70 48.01
F76.20 76.20 88.90 88.90 88.90 88.90 101.60 101.60 101.60
8T SERIES
© 2019 SOURIAU - SOURIAU is a registered trademark
Common Section
8T Series
Contacts:
Crimp contacts ................................................................................................... 30
Straight PC tail contacts ..................................................................................... 30
Filler plugs ......................................................................................................... 30
Tooling:
Insertion and extraction tools ............................................................................ 31
Crimping tools ................................................................................................... 31
Backshell tightening tools .................................................................................. 31
Tightening support ............................................................................................ 31
Slackening tools ................................................................................................. 31
Wiring instruction .................................................................................................... 32
Sealing gaskets ....................................................................................................... 33
Orientations ............................................................................................................ 33
Dummy receptacles ................................................................................................ 33
Backshells assembly ................................................................................................ 34
Coordinates for straight PC tail terminations .......................................................... 36
Cross reference list .................................................................................................. 45
30
8T Series | Common Section
Straight PC tail contacts
Crimp contacts
Contacts
Filler plugs
Direction of introduction
in grommet
These ller plugs are installed
at the rear of unwired contact
to maintain connector sealing.
Contact
size MS
Part number (Rev. N) Color SOURIAU
Part number Color
#22D MS27488-22-2 Black 8660-212 Black
#20 MS27488-20-2 Red 8522-389A Red
#16 MS27488-16-2 Green 8522-390A Blue
#12 MS27488-12-2 Orange 8522-391A Yellow
Contact size Contact type Ø
Conductor section External Ø
over insulator SOURIAU
Part number
without color code
MIL-DTL-38999 contacts
AWG mm²
Min Max Min Max Min Max Part number Color code
#22D Pin 0.76 26 22 0.12 0.40 0.71 1.37 85990702JJ M39029/58-360 Black/Blue/Orange
Socket 85990710900 M39029/57-354 Yellow/Green/Orange
#20 Pin 1.00 24 20 0.21 0.60 1.02 2.11 85990703SA M39029/58-363 Orange/Blue/Orange
Socket 85990711900 M39029/57-357 Purple/Green/Orange
#16 Pin 1.60 20 16 0.60 1.34 1.65 2.77 85990704MJ M39029/58-364 Yellow/Blue/Orange
Socket 85990712900 M39029/57-358 Grey/Green/Orange
#12 Pin 2.40 14 12 1.91 3.18 2.46 3.61 85990705MJ M39029/58-365 Green/Blue/Orange
Socket 85990713900 M39029/57-359 White/Green/Orange
Contact size Contact type Contact length Part number
#22D Pin L: Long PC tail 85990720900
C: Short PC tail 85990730900
#20 Pin L: Long PC tail 85990771900
C: Short PC tail 85990724900
#16 Pin L: Long PC tail 85997496A900
C: Short PC tail 85990726900
#12 Pin C: Short PC tail 85997711900
31
8T Series | Common Section
Tightening support
Part number: 8599-0802
This tool is made up of
dummy receptacles
housings of all 9 sizes for all
key polarisation, and secures
free connectors during wiring
and tting of rear accessories.
8599-0802
Backshell tightening tools
8498-03 Backshell tightening pliers,
part number: 8498-03
Square jaws (order 2 jaws),
part number: 8500-1015
Tightening of rear accessories:
Strap clamp,
part number: 8498-04
Spare strap,
part number: 8498-103
Slackening tools
8498-04
Insertion and extraction tools
Contact
size Material Part number
MIL standard
Color
Insertion Extraction
#22D Plastic M81969/14-01 Green White
#20 Plastic M81969/14-10 Red Orange
#16 Plastic M81969/14-03 Blue White
#12 Plastic M81969/14-04 Yellow White
Shell size 8 10 12 14 16 18 20 22 24
Max torque
in m/daN 0.62 1.24
Tooling
Crimping tools
Contact
size
Contact
type
Wire sizes Plier
M22520/1-01
Plier
M22520/2-01
(SOURIAU 8476-01)
mm² AWG Turret Part number Locator Part number
#22D
Pin 0.38
0.21
0.15
0.095
22
24
26
28
-
M22520/2-09
Socket M22520/2-06
#20
Pin 0.60
0.38
0.21
20
22
24 M22520/1-04 M22520/2-10
Socket
#16
Pin 1.34
0.93
0.60
16
18
20 M22520/1-04 -
Socket
#12
Pin 3.18
1.91 14
12 M22520/1-04 -
Socket
32
8T Series | Common Section
Wiring instruction
Cable preparation and wire stripping
L = length of wire stripping
L
Conductor
insulation Barrel
Inspection hole
Wire
0.5 to 0.8 mm
Insertion of wire in contact barrel
When inserting the stripped wire into the contact barrel check that no
strands are left outside and that the wire is visible through the wire
inspection hole in the barrel.
Important:
- Slide any accessories over wire strands before carrying out the following operations.
- Contacts are inserted and extracted from the rear of the connector.
Insertion of the contacts
1 - Engage the crimp cable /
contact asembly into the
longitudinal slot of the plastic
tool (coloured tip).
Slide the tool down the cable
until the tip of the tool abuts
the contact retention shoulder.
1
2
3
Extraction of the contacts
1 - Engage the appropriate
cable into the longitudinal
slot of the tool with the white
tip towards connector.
1
2
3
2 - Slide the tool down
towards the contact. Insert
the tool in the insulator until
it abuts the contact shoulder.
3 - Holding the tool-contact
and cable assembly together,
remove them simultaneously.
2 - Introduce the contact into
the required contact cavity
in the insulator, pushing tool
axialy, until the contact snaps
into position in clip.
3 - Withdraw the tool from rear.
Check that contact is rmly
locked by pulling wire gently.
When connector is fully loaded,
check the position of contact
tips. They should all be in the
same plane.
Nota: For larger sizes of cable
which are stiff enough manual
insertion without tool is
preferable.
Contact
size #22D #20 #16 #12
L4 6
33
8T Series | Common Section
Orientations
Polarization is determined by the master keyway position.
The secondary keyway positions remain xed.
Shell
size
Angles (degrees)
N A B C D
08 100 82 - - 118
10 100 86 72 128 114
12 100 80 68 132 120
14 100 79 66 134 121
16 100 82 70 130 118
18 100 82 70 130 118
20 100 82 70 130 118
22 100 85 74 126 115
24 100 85 74 126 115
View from
front face
of receptacle
N
10°
37°
100°
28°
A
10°
37°
100°
28°
B
10°
37°
100°
28°
C
10°
37°
100°
28°
D
10°
37°
100°
28°
Dummy receptacles
11.28 ±0.06
1.62 ±0.08
ØA
ØD
C
B
Shell
size A
B
C
D Part Numbers
Min. Max. Min. Max. Olive green
cadmium plating Nickel plating
08 13.24 20.57 21.10 15.09 3.08 3.30 8T3-08GUR 8T3-08FUR
10 16.19 23.78 24.31 18.26 3.08 3.30 8T3-10GUR 8T3-10FUR
12 20.48 26.16 26.69 20.62 3.08 3.30 8T3-12GUR 8T3-12FUR
14 23.70 28.55 29.08 23.01 3.08 3.30 8T3-14GUR 8T3-14FUR
16 26.84 30.91 31.71 24.61 3.08 3.30 8T3-16GUR 8T3-16FUR
18 30.00 33.27 34.10 26.97 3.08 3.30 8T3-18GUR 8T3-18FUR
20 33.18 36.47 37.28 29.36 3.08 3.30 8T3-20GUR 8T3-20FUR
22 36.35 39.65 40.45 31.75 3.08 3.30 8T3-22GUR 8T3-22FUR
24 39.55 42.82 43.63 34.93 3.71 3.99 8T3-24GUR 8T3-24FUR
Note: All dimensions are in millimeters (mm)
Gaskets
Shell
size
Part Numbers
For receptacle Type 0 For receptacle Type 7
08 8525 1431 AS3582-022
10 8525 1432 AS3582-024
12 8525 1433 AS3582-026
14 8525 1434 AS3582-028
16 8525 1435 AS3582-029
Shell
size
Part Numbers
For receptacle Type 0 For receptacle Type 7
18 8525 1436 AS3582-030
20 8525 1437 AS3582-031
22 8525 1438 AS3582-032
24 8525 1439 AS3582-033
34
8T Series | Common Section
Backshells assembly
Step 1: Prepare cable braid
Terminate wires to connector and screw the backshell to connector.
Prepare the cable for termination process.
WARNING ! Banding must occur on an un-xtured cable assembly.
Attaching a band to a rmly clamped cable will affect the applied forces
and will also interfere with the cut-off operation. The cut-off operation
causes a rotation of the band termination in order to lock the band.
Step 2: Push braid over adaptor
Push the braid over the retention lip to the adaptor incline point or
ensuring 10.2mm [0.4”] minimum braid length over termination area.
Milk the braid as required to remove the slack and insure a snug t
around the shield termination area.
Step 3: Prepare band
Roll the band through the buckle slot twice. Pull on the band until the
tail length indicator mark is within approximately 6.4 mm (0.250 in) of
the buckle slot. The band may be tightened further if desired.
WARNING ! Always roll band through the buckle slot twice in order to
ensure correct functioning.
Step 4: Install band
a ) Squeeze the gripper release lever of the banding tool and insert
the band into the front end opening of the tool as shown on picture.
WARNING ! The circular portion of looped band must always face
downward.
b ) Aligning the band and the tool with the shield termination area,
squeeze the black pull-up handle repeatedly using short strokes until it
locks against the tool body (this indicates that the band is compressed
to the tool pre-calibrated tension).
IMPORTANT ! Operator technique can affect the integrity of the band
installation. The operator should use abbreviated or partial strokes
of the pull-up handle as the band is pulling up against the braid. As
the band becomes completely tight, apply a full strokes of the pull-up
handle to ensure that the full calibrated force of the tool is applied as
the handle locks into position.
c ) Complete the clamping process by squeezing the gray cut-off
handle, allowing the cable to rotate slightly during cut-off.
Step 5: Inspect the shield termination
Remove the excess band from the tool. Inspect shield termination.
Install the heat shrinkable boot, if required.
WARNING ! Tools and Bands should never be lubricated.
Retention lip Conductors Braid
Buckle Tail length indicator mark
Adaptor Incline
10.2 Minimum length of braid
over termination area
Gripper
release
lever
Pull-up handle
Cut-off handle
Band lock Type 05
Note: All dimensions are in millimeters (mm)
35
8T Series | Common Section
Band-it
8.9 (REF.)1.9 (REF.)
6.2 (REF.)0.5 (REF.)
4.0 (REF.) 362 ±1.5
Tail length indicator mark
Double cone Type 06
Prepare the cable for termination process and slide the backshell parts
onto the cable the items in the order shown in above gure. Screw the
backshell at the rear of the connector.
Step 2: Push braid over adaptor
Release the braid and slide the inner cone over the braid.
Fold back the braid on the inner cone and x it with an adhesive tape
on to the jacket of the cable. Slide the outer cone over the braid and
the inner cone. Screw the backnut at the rear of the backshell and tigh-
ten it. Install heat shrinkable boot.
Please refer to Step 3-b for alternate method (Single folding).
Step 3-b: Single folding
Cut the braid as shown. Slide the outer cone over the braid and the in-
ner cone. Screw the backnut at the rear of the backshell and tighten it.
Install heat-shrinkable boot.
Step 1: Prepare cable braid Step 3-a: Double folding
Inner
cone
Conductors Braid Backnut Cable
jacket
Outer
cone
Braid Inner cone Braid
BraidBacknut
Note: All dimensions are in millimeters (mm)
Designation Flat stainless steel
standard band
Pre-coiled
stainless steel
standard band
Hand
banding tool
Part number M85049/128-3 M85049/128-4 8599-9346
36
08
8T Series | Common Section
Coordinates for straight PC tail terminations
Viewed from front face of male insulator
Hole sizes: 1mm min. (#22 and #20 contacts) and 1.3mm min. (#16 contact) coordinates in mm.
98
+X-X
+Y
-Y
35
+X-X
+Y
-Y
05
+X-X
+Y
-Y
10
Ctc X Y
1+1.14 +1.98
2+1.98 -1.14
30.00 -2.29
4-1.98 -1.14
5-1.14 +1.98
60.00 0.00
Ctc X Y
A+1.65 +0.97
B0.00 -1.90
C-1.65 +0.97
Ctc X Y
A+1.65 +1.42
B+2.86 -1.65
C0.00 -3.30
D-2.86 -1.65
E-1.65 +1.42
35
+X-X
+Y
-Y
Ctc X Y
10.00 +3.71
2+2.16 +3.00
3+3.51 +1.14
4+3.51 -1.14
5+2.16 -3.00
60.00 -3.71
7-2.16 -3.00
Ctc X Y
8-3.51 -1.14
9-3.51 +1.14
10 -2.16 +3.00
11 0 +1.42
12 +1.24 -0.89
13 -1.24 -0.89
98
+X-X
+Y
-Y
Ctc X Y
A0.00 +3.30
B+3.30 0.00
C+1.65 -2.87
D-1.65 -2.87
E-3.30 0.00
F0.00 0.00
99
+X-X
+Y
-Y
Ctc X Y
A+1.65 +2.85
B+3.30 0.00
C+1.65 -2.87
D-1.65 -2.87
E-3.30 0.00
F-1.65 +2.87
G0.00 0.00
37
8T Series | Common Section
12
+X-X
+Y
-Y
04 35
+X-X
+Y
-Y
08
+X-X
+Y
-Y
98
+X-X
+Y
-Y
Ctc X Y
A0.00 +3.81
B+3.71 +0.89
C0.00 -2.11
D-3.71 +0.89
Ctc X Y
A+1.65 +3.99
B+4.32 0.00
C+3.05 -3.05
D0.00 -4.32
E-3.05 -3.05
F-4.32 0.00
G-1.65 +3.99
H0.00 +1.12
Ctc X Y
A0.00 +4.95
B+3.18 +3.81
C+4.90 +0.76
D+4.17 -2.67
E0.00 -3.43
F-4.17 -2.67
G-4.90 +0.76
H-3.18 +3.81
J+1.65 -0.38
K-1.65 -0.38
Ctc X Y
1+1.14 +5.00
2+3.20 +4.01
3+4.62 +2.24
4+5.16 0.00
5+4.62 -2.24
6+3.20 -4.01
7+1.14 -5.00
8-1.14 -5.00
9-3.20 -4.01
10 -4.62 -2.24
11 -5.16 0.00
Ctc X Y
12 -4.62 +2.24
13 -3.20 +4.01
14 -1.14 +5.00
15 +1.14 +2.72
16 +2.97 +0.66
17 +2.36 -1.91
18 0.00 -3.05
19 -2.36 -1.91
20 -2.97 +0.66
21 -1.24 +2.72
22 0.00 -0.76
38
8T Series | Common Section
35
+X-X
+Y
-Y
Ctc X Y
1+1.14 +6.65
2+3.12 +5.51
3+5.36 +4.06
4+6.45 +2.03
5+6.76 -0.25
6+6.27 -2.49
7+5.08 -4.45
8+3.30 -5.89
Ctc X Y
31 +1.14 +1.88
32 +2.29 -0.10
33 +1.14 -2.08
34 -1.14 -2.08
35 -2.29 -0.10
36 -1.14 +1.88
37 0.00 -0.10
Ctc X Y
9+1.14 -6.65
10 -1.14 -6.65
11 -3.30 -5.89
12 -5.08 -4.45
13 -6.27 -2.49
14 -6.76 -0.25
15 -6.45 +2.03
16 -5.36 +4.06
Ctc X Y
17 -3.12 +5.51
18 -1.14 +6.65
19 +1.14 +4.37
20 +3.12 +3.02
21 +4.32 +1.02
22 +4.32 -1.27
23 +3.12 -3.23
Ctc X Y
24 +1.14 -4.37
25 -1.14 -4.37
26 -3.12 -3.23
27 -4.32 -1.27
28 -4.32 +1.02
29 -3.12 +3.02
30 -1.14 +4.37
14
18
+X-X
+Y
-Y
05
+X-X
+Y
-Y
Ctc X Y
A0 +2.54
B+4.42 +0.61
C+2.39 +3.76
D-2.39 -3.76
E-4.42 +0.61
Ctc X Y
A+1.65 +6.40
B+4.95 +2.87
C+6.60 0.00
D+4.95 -2.87
E+3.30 -5.72
F0.00 -5.72
G-3.30 -5.72
H-4.95 -2.87
J-6.60 0.00
Ctc X Y
K-4.95 +2.87
L-1.65 +6.40
M-1.65 +2.87
N+1.65 +2.87
P+3.30 0.00
R+1.65 -2.87
S-1.65 -2.87
T-3.30 0.00
U0.00 0.00
19
+X-X
+Y
-Y
Ctc X Y
A0.00 +5.72
B+3.30 +5.72
C+4.95 +2.87
D+6.60 0.00
E+4.95 -2.87
F+3.30 -5.72
G0.00 -5.72
H-3.30 -5.72
J-4.95 -2.87
K-6.60 0.00
Ctc X Y
L-4.95 +2.87
M-3.30 +5.72
N-1.65 +2.87
P+1.65 +2.87
R+3.30 0.00
S+1.65 -2.87
T-1.65 -2.87
U-3.30 0.00
V0.00 0.00
97
+X-X
+Y
-Y
Ctc X Y
A+1.65 +5.94
B+4.52 +4.52
C+5.84 -0.58
D+4.52 -4.52
E+1.65 -5.94
F-2.26 -5.97
G-5.26 -2.41
H-5.94 +1.65
J-4.52 +4.52
K-1.65 +5.94
L-1.19 +2.06
M+1.19 -2.06
39
8T Series | Common Section
16
35
+X-X
+Y
-Y
99
+X-X
+Y
-Y
06
+X-X
+Y
-Y
08
+X-X
+Y
-Y
26
+X-X
+Y
-Y
Ctc X Y
A+3.07 +5.31
B+6.12 0.00
C0.00 -6.12
D-6.12 0.00
E-3.07 +5.31
F0.00 0.00
Ctc X Y
A0.00 +5.99
B+3.25 +2.18
C+5.84 -1.98
D+2.39 -5.49
E-2.39 -5.49
F-5.84 -1.98
G-3.25 +2.18
H0.00 -1.32
Ctc X Y
A0.00 +8.15
B+3.33 +7.44
C+6.07 +5.44
D+7.75 +2.51
E+8.10 -0.86
F+7.06 -4.09
G+4.80 -6.60
H+1.70 -7.98
J-1.70 -7.98
K-4.80 -6.60
L-7.06 -4.09
M-8.10 -0.86
N-7.75 +2.51
Ctc X Y
P-6.07 +5.44
R-3.33 +7.44
S-1.78 +4.50
T+1.78 +4.50
U+4.45 +2.39
V+4.53 -0.91
W+3.02 -3.84
X0.00 -5.16
Y-3.02 -3.84
Z-4.53 -0.91
a-4.45 +2.39
b0.00 +1.65
c0.00 -1.65
Ctc X Y
A0.00 +8.15
B+3.33 +7.44
C+6.07 +5.44
D+7.75 +2.51
E+8.10 -0.86
F+7.06 -4.09
G+4.80 -6.60
H+1.70 -7.98
J-1.70 -7.98
K-4.80 -6.60
L-7.06 -4.09
M-8.10 -0.86
Ctc X Y
N-7.75 +2.51
P-6.07 +5.44
R-3.33 +7.44
S-1.78 +4.50
T+1.78 +4.50
U+4.45 +2.39
V+3.81 -1.91
W0.00 -4.09
X-3.81 -1.91
Y-4.45 +2.39
Z0.00 +0.64
Ctc X Y
1-7.92 +2.18
2-7.92 -0.10
3-7.92 -2.39
4-6.15 +5.61
5-5.94 +3.33
6-5.94 +1.04
7-5.94 -1.24
8-5.94 -3.53
9-5.94 -5.82
10 -4.37 +7.09
11 -3.96 +4.47
Ctc X Y
12 -3.96 +2.18
13 -3.96 -0.10
14 -3.96 -2.39
15 -3.96 -4.67
16 -3.96 -6.96
17 -2.26 +8.03
18 -1.98 +5.61
19 -1.98 +3.33
20 -1.98 +1.04
21 -1.98 -1.24
22 -1.98 -3.53
Ctc X Y
23 -1.98 -5.82
24 -1.98 -8.10
25 0.00 +8.36
26 0.00 +4.47
27 0.00 +2.18
28 0.00 -0.10
29 0.00 -2.39
30 0.00 +4.67
31 0.00 -6.96
32 +2.26 +8.03
33 +1.98 +5.61
Ctc X Y
45 +3.96 -4.67
46 +3.96 -6.96
47 +6.15 +5.61
48 +5.94 +3.33
49 +5.94 +1.04
50 +5.94 -1.24
51 +5.94 -3.53
52 +5.94 -5.82
53 +7.92 +2.18
54 +7.92 -0.10
55 +7.92 2-.39
Ctc X Y
34 +1.98 +3.33
35 +1.98 +1.04
36 +1.98 -1.24
37 +1.98 -3.53
38 +1.98 -5.82
39 +1.98 -8.10
40 +4.37 +7.09
41 +3.96 +4.47
42 +3.96 +2.18
43 +3.96 -0.10
44 +3.96 -2.39
40
8T Series | Common Section
18
35
+X-X
+Y
-Y
11 32
+X-X
+Y
-Y
+X-X
+Y
-Y
Ctc X Y
A+2.67 +6.60
B+6.35 +3.35
C+6.99 -1.35
D+4.55 -5.46
E0.00 -7.14
F-4.55 -5.46
G-6.99 -1.35
H-6.35 +3.35
J-2.67 +6.60
K0.00 +2.67
L0.00 -2.34
Ctc X Y
A+1.68 +8.97
B+4.80 +7.75
C+7.26 +5.51
D+8.76 +2.49
E+9.07 -0.84
F+8.15 -4.06
G+6.15 -6.73
H+3.30 -8.51
J0.00 -9.12
K-3.30 -8.51
L-6.15 -6.73
M-8.15 -4.06
N-9.07 -0.84
P-8.76 +2.49
R-7.26 +5.51
S-4.80 +7.75
Ctc X Y
T-1.68 +8.97
U0.00 +5.84
V+3.15 +4.90
W+5.31 +2.41
X+5.79 -0.84
Y+4.42 -3.84
Z+1.65 -5.61
a-1.65 -5.61
b-4.42 -3.84
c-5.79 -0.84
d-5.31 +2.41
e-3.15 +4.90
f0.00 +2.44
g+2.44 0.00
h0.00 -2.44
j-2.44 0.00
Ctc X Y
1-9.07 +2.29
2-9.07 0.00
3-9.07 -2.29
4-7.09 +5.71
5-7.09 +3.43
6-7.09 +1.14
7-7.09 -1.14
8-7.09 -3.43
9-7.09 -5.71
10 -5.11 +6.86
11 -5.11 +4.57
12 -5.11 +2.29
13 -5.11 0.00
14 -5.11 -2.29
Ctc X Y
15 -5.11 -4.57
16 -5.11 -6.86
17 -3.12 +8.00
18 -3.12 +5.71
19 -3.12 +3.43
20 -3.12 +1.14
21 -3.12 -1.14
22 -3.12 -3.43
23 -3.12 -5.71
24 -3.12 -8.00
25 -1.14 +9.14
26 -1.14 +6.86
27 -1.14 +4.57
Ctc X Y
28 -1.14 +2.29
29 -1.14 0.00
30 -1.14 -2.29
31 -1.14 -4.57
32 -1.14 -6.86
33 -1.14 -9.14
34 +1.14 +9.14
35 +1.14 +6.86
36 +1.14 +4.57
37 +1.14 +2.29
38 +1.14 0.00
39 +1.14 -2.29
40 +1.14 -4.57
Ctc X Y
41 +1.14 -6.86
42 +1.14 -9.14
43 +3.12 +8.00
44 +3.12 +5.71
45 +3.12 +3.43
46 +3.12 +1.14
47 +3.12 -1.14
48 +3.12 -3.43
49 +3.12 -5.71
50 +3.12 -8.00
51 +5.11 +6.86
52 +5.11 +4.57
53 +5.11 +2.29
Ctc X Y
54 +5.11 0.00
55 +5.11 -2.29
56 +5.11 -4.57
57 +5.11 -6.86
58 +7.09 +5.71
59 +7.09 +3.43
60 +7.09 +1.14
61 +7.09 -1.14
62 +7.09 -3.43
63 +7.09 -5.71
64 +9.07 +2.29
65 +9.07 0.00
66 +9.07 -2.29
41
8T Series | Common Section
20
41
+X-X
+Y
-Y
39
+X-X
+Y
-Y
16
+X-X
+Y
-Y
35
+X-X
+Y
-Y
Ctc X Y
A+3.00 +8.18
B+6.88 +5.36
C+8.66 +0.91
D+7.82 -3.81
E+4.62 -7.37
F0.00 -8.71
G-4.62 -7.37
H-7.82 -3.81
Ctc X Y
J-8.66 +0.91
K-6.88 +5.36
L-3.00 +8.18
M0.00 +4.45
N+3.91 +1.57
P+2.39 -3.10
R-2.39 -3.10
S-3.91 +1.57
Ctc X Y
1+1.35 +10.82
2+3.71 +10.26
3+5.89 +9.19
4+7.77 +7.67
5+9.27 +5.77
6+10.31 +3.58
7+10.85 +1.22
8+10.85 -1.22
9+10.31 -3.58
10 +9.27 -5.77
11 +7.77 -7.67
12 +5.89 -9.19
13 +3.71 -10.26
Ctc X Y
14 +1.35 -10.82
15 -1.35 -10.82
16 -3.71 -10.26
17 -5.89 -9.19
18 -7.77 -7.67
19 -9.27 -5.77
20 -10.31 -3.58
21 -10.85 -1.22
22 -10.85 +1.22
23 -10.31 +3.58
24 -9.27 +5.77
25 -7.77 +7.67
26 -5.89 +9.19
27 -3.71 +10.26
28 -1.35 +10.82
29 0.00 +8.20
30 +2.49 +8.18
31 +4.67 +7.11
32 +6.55 +5.59
33 +7.90 +3.58
34 +8.43 +1.22
35 +8.43 -1.22
Ctc X Y
36 +7.90 -3.58
37 +6.55 -5.59
38 +4.67 -7.11
39 +2.49 -8.18
40 0.00 -8.81
41 -2.49 -8.18
42 -4.67 -7.11
43 -6.55 -5.59
44 -7.90 -3.58
45 -8.43 -1.22
46 -8.43 +1.22
47 -7.90 +3.58
48 -6.55 +5.59
49 -4.67 +7.11
50 -2.49 +8.18
51 -1.22 +6.12
52 +1.22 +6.12
53 +3.40 +5.05
54 +5.28 +3.53
55 +6.02 +1.22
56 +6.02 -1.22
57 +5.28 -3.53
Ctc X Y
58 +3.40 -5.05
59 +1.22 -6.12
60 -1.22 -6.12
61 -3.40 -5.05
62 -5.28 -3.53
63 -6.02 -1.22
64 -6.02 +1.22
65 -5.28 +3.53
66 -3.40 +5.05
67 -1.22 +3.71
68 +1.22 +3.71
69 +3.18 +2.29
70 +3.94 0.00
71 +3.18 -2.29
72 +1.22 -3.71
73 -1.22 -3.71
74 -3.18 -2.29
75 -3.94 0.00
76 -3.18 +2.29
77 0.00 +1.35
78 +1.22 -0.74
79 -1.22 -0.74
Ctc X Y
A+1.65 +10.44
B+4.80 +9.42
C+7.47 +7.47
D+9.42 +4.80
E+10.44 +1.65
F+10.44 -1.65
G+9.42 -4.80
H+7.47 -7.47
J+4.80 -9.42
K+1.65 -10.44
L-1.65 -10.44
M-4.80 -9.42
N-7.47 -7.47
Ctc X Y
P-9.42 -4.80
R-10.44 -1.65
S-10.44 +1.65
T-9.42 +4.80
U-7.47 +7.47
V-4.80 +9.42
W-1.65 +10.44
X0.00 +7.49
Y+3.20 +6.50
Z+5.89 +4.55
a+7.11 +1.45
b+7.11 -1.88
c+5.51 -4.80
Ctc X Y
d+2.84 -6.73
e-2.84 -6.73
f-5.51 -4.80
g-7.11 -1.88
h-7.11 +1.45
i-5.89 +4.55
j-3.20 +6.50
k0.00 +4.17
m+2.90 +1.22
n+2.69 -2.72
p0.00 -4.80
q-2.69 -2.72
r-2.90 +1.22
Ctc X Y
A0.00 +10.60
B+3.28 +10.09
C+6.23 +8.58
D+8.58 +6.23
E+10.09 +3.28
F+10.60 0.00
G+10.09 -3.28
H+8.58 -6.23
J+6.23 -8.58
K+3.28 -10.09
L0.00 -10.60
Ctc X Y
M-3.26 -10.09
N-6.23 -8.58
P-8.58 -6.23
R-10.09 -3.28
S-10.60 0.00
T-10.09 +3.28
U-8.58 +6.23
V-6.23 +8.58
W-3.28 +10.09
X0.00 +7.20
Y+3.35 +6.38
Ctc X Y
Z+5.92 +4.09
a+7.15 +0.87
b+6.73 -2.55
c+4.78 -5.39
d+1.73 -6.99
e-1.73 -6.99
f-4.78 -5.39
g-6.73 -2.55
h-7.15 +0.87
i-5.92 +4.09
j-3.35 +6.38
k0.00 +3.81
m+2.98 +2.38
n+3.71 -0.85
p+1.66 -3.43
q-1.66 -3.43
r-3.71 -0.85
s-2.98 +2.38
t0.00 0.00
42
8T Series | Common Section
22
21
+X-X
+Y
-Y
53
+X-X
+Y
-Y
Ctc X Y
A+3.25 +9.78
B+7.34 +7.24
C+9.80 +3.12
D+10.16 -1.65
E+8.33 -6.07
F+4.65 -9.19
G0.00 -10.31
H-4.65 -9.19
J-8.33 -6.07
K-10.16 -1.65
L-9.80 +3.12
M-7.34 +7.24
N-3.25 +9.78
P0.00 +6.22
R+4.06 +3.71
S+5.44 -0.89
T+2.39 -4.93
U-2.39 -4.93
V-5.44 -0.89
W-4.06 +3.71
X0.00 0.00
Ctc X Y
A+2.84 +11.56
B+5.72 +9.91
C+8.53 +8.26
D+11.43 +3.30
E+11.43 0.00
F+11.43 -3.30
Ctc X Y
G+8.53 -8.26
H+5.72 -10.41
J-5.72 -10.41
K-8.53 -8.26
L-11.43 -3.30
M-11.43 0.00
Ctc X Y
N-11.43 +3.30
P-8.53 +8.26
R-5.72 +9.91
S-2.84 +11.56
T0.00 +9.91
U+2.84 +8.26
V+5.72 +6.60
W+8.53 +4.95
X+8.53 +1.65
Y+8.53 -1.65
Z+8.53 -4.95
a+5.72 -6.60
b+2.84 -8.26
c0.00 -9.91
d-2.84 -8.26
e-5.72 -6.60
f-8.53 -4.95
g-8.53 -1.65
h-8.53 +1.65
k-8.53 +4.95
Ctc X Y
m-5.72 +6.60
n-2.84 +8.26
p0.00 +6.60
q+2.84 +4.95
r+5.72 +3.30
s+5.72 0.00
t+5.72 -3.30
u+2.84 -4.95
v0.00 -6.60
w-2.84 -4.95
x-5.72 -3.30
y-5.72 0.00
z-5.72 +3.30
AA -2.84 +4.95
BB 0.00 +3.30
CC +2.84 +1.65
DD +2.84 -1.65
EE 0.00 -3.30
FF -2.84 -1.65
GG -2.84 +1.65
HH 0.00 0.00
35
+X-X
+Y
-Y
Ctc X Y
1-10.87 +6.12
2-11.86 +3.91
3-12.40 +1.55
4-10.54 0.00
5-12.40 -1.55
6-10.87 -3.61
7-10.87 -6.02
8-8.43 +8.46
9-8.43 +6.05
10 -8.43 +3.63
11 -8.43 +1.22
12 -8.43 -1.19
13 -8.43 -3.61
14 -8.43 -6.02
15 -8.43 -8.43
16 -6.32 +9.65
17 -6.32 +7.24
18 -6.32 +4.83
19 -6.32 +2.41
20 -6.32 0.00
Ctc X Y
21 -6.32 -2.41
22 -6.32 -4.83
23 -6.32 -7.24
24 -6.32 -9.65
25 -4.22 +10.87
26 -4.22 +8.46
27 -4.22 +6.05
28 -4.22 +3.63
29 -4.22 +1.22
30 -4.22 -1.19
31 -4.22 -3.61
32 -4.22 -6.02
33 -4.22 -8.43
34 -4.22 -10.85
35 -2.11 +12.07
36 -2.11 +9.65
37 -2.11 +7.24
38 -2.11 +4.83
39 -2.11 +2.41
40 -2.11 0.00
Ctc X Y
41 -2.11 -2.41
42 -2.11 -4.83
43 -2.11 -7.24
44 -2.11 -9.65
45 -2.11 -12.07
46 0.00 +10.87
47 0.00 +8.46
48 0.00 +6.05
49 0.00 +3.63
50 0.00 +1.22
51 0.00 -1.19
52 0.00 -3.61
53 0.00 -6.02
54 0.00 -8.43
55 0.00 -10.85
56 +2.11 +12.07
57 +2.11 +9.65
58 +2.11 +7.24
59 +2.11 +4.83
60 +2.11 +2.41
Ctc X Y
61 +2.11 0.00
62 +2.11 -2.41
63 +2.11 -4.83
64 +2.11 -7.24
65 +2.11 -9.65
66 +2.11 -12.07
67 +4.22 +10.87
68 +4.22 +8.46
69 +4.22 +6.05
70 +4.22 +3.63
71 +4.22 +1.22
72 +4.22 -1.19
73 +4.22 -3.61
74 +4.22 -6.02
75 +4.22 -8.43
76 +4.22 -10.85
77 +6.32 +9.65
78 +6.32 +7.24
79 +6.32 +4.83
80 +6.32 +2.41
Ctc X Y
81 +6.32 0.00
82 +6.32 -2.41
83 +6.32 -4.83
84 +6.32 -7.24
85 +6.32 -9.65
86 +8.43 +8.46
87 +8.43 +6.05
88 +8.43 +3.63
89 +8.43 +1.22
90 +8.43 -1.19
91 +8.43 -3.61
92 +8.43 -6.02
93 +8.43 -8.43
94 +10.87 +6.12
95 +11.86 +3.91
96 +12.40 +1.55
97 +10.54 0.00
98 +12.40 -1.55
99 +10.87 -3.61
100 +10.87 -6.02
43
8T Series | Common Section
24
04
+X-X
+Y
-Y
29
+X-X
+Y
-Y
Ctc X Y
A+1.75 +13.49
B+5.16 +12.57
C+8.23 +10.80
D+10.77 +8.28
E+12.52 +5.21
F+13.49 +1.75
G+13.49 -1.75
Ctc X Y
H+12.52 -5.21
J+10.77 -8.28
K+8.23 -10.80
L+5.16 -12.57
M+1.75 -13.49
N-1.75 -13.49
P-5.16 -12.57
Ctc X Y
R-8.23 -10.80
S-10.77 -8.28
T-12.52 -5.21
U-13.49 -1.75
V-13.49 +1.75
W-12.52 +5.21
X-10.77 +8.28
Y-8.23 +10.80
Z-5.16 +12.57
a-1.75 +13.49
b+2.18 +10.08
c+5.38 +8.78
d+7.90 +6.38
e+9.58 +3.35
f+10.46 0.00
g+9.58 -3.35
h+7.90 -6.38
k+5.38 -8.78
m+2.18 -10.08
n-2.18 -10.08
p-5.38 -8.78
Ctc X Y
q-7.90 -6.38
r-9.58 -3.35
s-10.46 0.00
t-9.58 +3.35
u-7.90 +6.38
v-5.38 +8.78
w-2.18 +10.08
x+1.75 +6.66
y+4.37 +3.78
z+6.55 0.00
AA +4.37 -3.78
BB +1.75 -6.66
CC -1.75 -6.66
DD -4.37 -3.78
EE -6.55 0.00
FF -4.37 -3.78
GG -1.75 -6.66
HH 0.00 +3.35
JJ +2.18 0.00
KK 0.00 -3.35
LL -2.18 0.00
Ctc X Y
A0.00 +12.22
B+6.55 +10.31
C+10.03 +7.04
D+11.91 +2.77
E+11.91 -2.77
F+10.03 -7.04
G+6.68 -10.31
H+2.31 -11.99
Ctc X Y
J-2.31 -11.99
K-6.68 -10.31
L-10.03 -7.04
M-11.91 -2.77
N-11.91 +2.77
P-10.03 +7.04
R-6.55 +10.31
S-2.31 +8.15
T+2.31 +8.15
U+5.79 +4.93
V+8.10 0.00
W+6.10 -4.60
X+2.31 -7.37
Y-2.31 -7.37
Z-6.10 -4.60
a-8.10 0.00
b-5.79 +4.93
c0.00 +4.09
d+3.40 0.00
e0.00 -3.30
f-3.40 0.00
+X-X
+Y
-Y
35 Ctc X Y
1-12.17 +7.09
2-13.21 +4.83
3-13.87 +2.41
4-14.10 0.00
5-13.87 -2.41
6-13.21 -4.83
7-12.17 -7.09
8-10.77 +9.07
9-10.54 +4.83
10 -10.54 +2.41
11 -10.54 0.00
12 -10.54 -2.41
13 -10.54 -4.83
14 -10.77 -9.07
15 -8.43 +11.28
16 -8.43 +8.43
17 -8.43 +6.02
18 -8.43 +3.61
19 -8.43 +1.19
20 -8.43 -1.19
21 -8.43 -3.61
22 -8.43 -6.02
23 -8.43 -8.43
24 -8.43 -10.85
25 -6.32 +12.60
26 -6.32 +9.65
Ctc X Y
27 -6.32 +7.24
28 -6.32 +4.83
29 -6.32 +2.41
30 -6.32 0.00
31 -6.32 -2.41
32 -6.32 -4.83
33 -6.32 -7.24
34 -6.32 -9.65
35 -6.32 -12.07
36 -4.06 +13.49
37 -4.22 +10.85
38 -4.22 +8.43
39 -4.22 +6.02
40 -4.22 +3.61
41 -4.22 +1.19
42 -4.22 -1.19
43 -4.22 -3.61
44 -4.22 -6.02
45 -4.22 -8.43
46 -4.22 -10.85
47 -4.22 -13.26
48 -2.11 +12.07
49 -2.11 +9.65
50 -2.11 +7.24
51 -2.11 +4.83
52 -2.11 +2.41
Ctc X Y
53 -2.11 0.00
54 -2.11 -2.41
55 -2.11 -4.83
56 -2.11 -7.24
57 -2.11 -9.65
58 -2.11 -12.07
59 0.00 +13.26
60 0.00 +10.85
61 0.00 +8.43
62 0.00 +6.02
63 0.00 +3.61
64 0.00 +1.19
65 0.00 -1.19
66 0.00 -3.61
67 0.00 -6.02
68 0.00 -8.43
69 0.00 -10.85
70 0.00 -14.10
71 +2.11 +12.07
72 +2.11 +9.65
73 +2.11 +7.24
74 +2.11 +4.83
75 +2.11 +2.41
76 +2.11 0.00
77 +2.11 -2.41
78 +2.11 -4.83
Ctc X Y
79 +2.11 -7.24
80 +2.11 -9.65
81 +2.11 -12.07
82 +4.06 +13.49
83 +4.22 +10.85
84 +4.22 +8.43
85 +4.22 +6.02
86 +4.22 +3.61
87 +4.22 +1.19
88 +4.22 -1.19
89 +4.22 -3.61
90 +4.22 -6.02
91 +4.22 -8.43
92 +4.22 -10.85
93 +4.22 -13.26
94 +6.32 +12.60
95 +6.32 +9.65
96 +6.32 +7.24
97 +6.32 +4.83
98 +6.32 +2.41
99 +6.32 0.00
100 +6.32 -2.41
101 +6.32 -4.83
102 +6.32 -7.24
103 +6.32 -9.65
Ctc X Y
104 +6.32 -12.07
105 +8.43 +11.28
106 +8.43 +8.43
107 +8.43 +6.02
108 +8.43 +3.61
109 +8.43 +1.19
110 +8.43 -1.19
111 +8.43 -3.61
112 +8.43 -6.02
113 +8.43 -8.43
114 +8.43 -10.85
115 +10.77 +9.07
116 +10.54 +4.83
117 +10.54 +2.41
118 +10.54 0.00
119 +10.54 -2.41
120 +10.54 -4.83
121 +10.77 -9.07
122 +12.17 +7.09
123 +13.21 +4.83
124 +13.87 +2.41
125 +14.10 0.00
126 +13.87 -2.41
127 +13.21 -4.83
128 +12.17 -7.09
44
8T Series | Common Section
24
+X-X
+Y
-Y
61
Ctc X Y
A+4.98 +12.70
B+7.98 +11.05
C+10.49 +8.71
D+12.32 +5.84
E+13.39 +2.57
F+13.61 -0.76
G+12.98 -4.17
H+11.53 -7.29
J+9.35 -9.93
K+6.58 -11.94
L+3.40 -13.18
M0.00 -13.64
N-3.40 -13.18
Ctc X Y
c+4.39 +9.22
d+7.24 +7.19
e+9.19 +4.45
f+10.13 +1.17
g+9.96 -2.24
h+8.66 -5.41
i+6.38 -7.98
j+3.38 -9.63
k0.00 -10.21
m-3.38 -9.63
n-6.38 -7.98
p-8.66 -5.41
Ctc X Y
CC -3.33 -5.92
DD -5.79 -3.53
EE -6.78 -0.25
FF -6.02 +3.10
GG -3.73 +5.66
HH 0.00 +5.08
JJ +2.67 +2.39
KK +3.43 -1.04
LL 0.00 -3.35
MM -3.43 -1.04
NN -2.67 +2.39
PP 0.00 0.00
Ctc X Y
P-6.58 -11.94
R-9.35 -9.93
S-11.53 -7.29
T-12.98 -4.17
U-13.61 -0.76
V-13.39 +2.57
W-12.32 +5.84
X-10.49 +8.71
Y-7.98 -11.05
Z-4.98 +12.10
a-1.73 +11.53
b+1.73 +11.53
Ctc X Y
q-9.96 -2.24
r-10.13 +1.17
s-9.19 +4.45
t-7.24 +7.19
u-4.39 +9.22
v0.00 +8.59
w+3.73 +5.66
x+6.02 +3.10
y+6.78 -0.25
z+5.79 -3.53
AA +3.33 -5.92
BB 0.00 -6.78
45
8T Series | Common Section
Designation
SOURIAU MIL-DTL-38999 Series II NFC 93422 HE309
Shell size
Contact layout
Orientation
8TX••X••X/X•
Shell size
Contact layout
Orientation
MSXXXXXX••X••X/X•
Shell size &
Contact layout
Orientation
HE309XXX••••X/X•XX
Square ange
receptacle
8T0••B••P/S•
8T0••F••P/S•
8T0••C••P/S•
MS27472T••B••P/S•
MS27472T••F••P/S•
MS27472T••C••P/S•
HE30900T••••P/S•7M
HE30900T••••P/S•6M
HE30900T••••P/S•8M
In line
receptacle
8T1••B••P/S•
8T1••F••P/S•
8T1••C••P/S•
- -
Square ange receptacle
not accepting backshells
(rear mounting)
8T2••B••P/S•
8T2••F••P/S•
8T2••C••P/S•
MS27508E••B••P/S•
MS27508E••F••P/S•
MS27508E••C••P/S•
HE30905T••••P/S•7M
HE30905T••••P/S•6M
HE30905T••••P/S•8M
Square ange receptacle
(rear mounting)
8T3••B••P/S•
8T3••F••P/S•
8T3••C••P/S•
MS27497T••B••P/S•
MS27497T••F••P/S•
MS27497T••C••P/S•
HE30903T••••P/S•7M
HE30903T••••P/S•6M
HE30903T••••P/S•8M
Square ange receptacle
not accepting backshells
8T4••B••P/S•
8T4••F••P/S•
8T4••C••P/S•
MS27499E••B••P/S•
MS27499E••F••P/S•
MS27499E••C••P/S•
HE30902T••••P/S•7M
HE30902T••••P/S•6M
HE30902T••••P/S•8M
Plug
with RFI shielding
8T5••B••P/S•
8T5••F••P/S•
8T5••C••P/S•
MS27484T••B••P/S•
MS27484T••F••P/S•
MS27484T••C••P/S•
HE309G6T••••P/S•7M
HE309G6T••••P/S•6M
HE309G6T••••P/S•8M
Plug
without RFI shielding
8T6••B••P/S•
8T6••F••P/S•
8T6••C••P/S•
MS27473T••B••P/S•
MS27473T••F••P/S•
MS27473T••C••P/S•
HE30906T••••P/S•7M
HE30906T••••P/S•6M
HE30906T••••P/S•8M
Jam nut
receptacle
8T7••B••P/S•
8T7••F••P/S•
8T7••C••P/S•
MS27474T••B••P/S•
MS27474T••F••P/S•
MS27474T••C••P/S•
HE30907T••••P/S•7M
HE30907T••••P/S•6M
HE30907T••••P/S•8M
Square ange receptacle
not accepting backshells
(rear milling)
8T10••B••P/S•
8T10••F••P/S•
8T10••C••P/S•
- -
Plug with RFI shielding
not accepting backshells
(rear milling)
8T15••B••P/S•
8T15••F••P/S•
8T15••C••P/S•
- -
Plug without RFI shielding
not accepting backshells
(rear milling)
8T16••B••P/S•
8T16••F••P/S•
8T16••C••P/S•
- -
Backshells 8TAB01A••W
8TAB01A••F
M85049/27••W
M85049/27••N -
Cross reference list
8T SERIES
© 2019 SOURIAU - SOURIAU is a registered trademark
Range Extension
8T Series
Box mount interconnect solutions .......................................................................... 48
Rack and panel ....................................................................................................... 48
microComp® Series ................................................................................................. 49
Double ange ......................................................................................................... 49
Integrated clinch nut or helicoils ............................................................................. 50
PC tail contacts without shoulder ............................................................................ 50
48
8T Series | Range Extension
Product range extension
Box Interconnect Solutions: Inside/Outside.
Anything you need - we can do!
PCB terminations:
. with many lengths and different types of plating.
Shape of connector can be adapted:
. to meet the board application as double flange receptacles.
Receptacles with short shell:
. to minimize space inside the box.
Any customized design:
. to make box mount easier when space is a constraint.
Blindmate/hermetic/thin panel assembly solutions...
Sealed rack and panel for blind connection.
A 100% scoop proof connector with quick
connection in hard-to-reach areas.
Blind connection:
. Easy and fast connection without any coupling/uncoupling
between a float-mounting unit & a fixed unit.
Float-mounting unit - rack:
. Female crimp contacts.
. Mounting on the cabinet side.
. Angular orientation with a key.
. Possibility to supply rear accessories.
Misalignment catching
:
. Longitudinal, axial and angular.
Rack and Panel
Box Mount
Interconnect Solutions
See «38999 Series I - 8LT Series Rack & Panel»
datasheet on www.souriau.com
See «Box Mount Interconnect Solutions» catalog on
www.souriau.com
49
micro
Comp® Series
To respond to miniaturization and weight saving
trends in aeronautical and defense applications
SOURIAU has developed an innovative high
density connector range.
Very light & high density:
. Shell in composite (or aluminum).
. Up to 66% lighter than HD D-Sub.
. Very high density up to 40% smaller than HD D-Sub.
Excellent features:
. With crimp removable contacts for wire AWG 24 to 28
. Temperature up to 175°C
. High vibration and shock withstanding
. Standard MIL-STD 83513 accessories
. Compatible with high speed data rates (Gigabit Ethernet...)
Quick connect version for harsh environment:
. 104 contacts push-push
Double Flange
Double flange solution for PCB mount.
Specially designed for PCB applications in
harsh environments, decoupling vibration
from the board.
Excellent mechanical performance:
. Standoffs integrated into the connector.
. No risk of breaking contacts and no risk of micro-cuts.
Design flexibility:
. Square flange or Jam nut versions available.
. Versatile contact length options.
A wide range:
. Available in aluminum with a range of layouts from shell
size 9 to 25.
User friendly:
. Easy to assemble & time saving.
Product range extension
8T Series | Range Extension
See «38999 Series III - Double Flange» datasheet on
www.souriau.com
See «microComp® Series - Miniature High Density»
datasheet on www.souriau.com
50
Integrated Clinch Nut
or Helicoils
Integrated clinch nut solution for box mount.
Equivalent mounting retention of the receptacle
ensured with only 4 clinch nuts. Designed for
severe applications.
User friendly:
. Easy to install.
Selflocking:
. Fast and secure.
Reduced mounting hardware:
. Elimination of nuts and washers.
Foreign Object Debris reduction
PC Tail Contacts
without Shoulder
Pin & socket PCB contacts without shoulder #22D
and #20 as per MIL-DTL-38999 Series I, II & III.
Contacts without shoulder allows a more flexible
mounting on variable PCB thicknesses or depths.
Ruggedized contacts:
. Material: copper alloy
. Finish: gold per MIL-G-45204 type I class 1 over nickel plate
. Sleeve: stainless steel
Flexible mounting:
. Various PCB thicknesses.
. Multiple PCB positioning.
Product range extension
8T Series | Range Extension
See «PCB contacts without shoulder» datasheet on
www.souriau.com
See «38999 Series III - Clinch Nut or Helicoils»
datasheet on www.souriau.com
Your local contact
Our contribution to environmental
protection:
This catalog is printed on PEFC
certied paper
Advancement of sustainable
wood cultivation. www.pefc.org
10-31-1299
Promoting sustainable
forest management
www.pefc.org
Reliable People, Reliable Solutions
WCA8TWUSEN06 © Copyright SOURIAU May 2019 - SOURIAU is a registered trademark
All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notication or public announcement. Any duplication is prohibited, unless approved in writing.
www.souriau.com
technical.emear@souriau.com (Europe - Asia - Africa)
technical.americas@souriau.com (North America)