Errata_10795_Rev_A.doc
5/17/2002
Please visit http://www.mot.com/coldfire for the latest ColdFire documentation and development tools.
M5272C3 Revision 2.2
Product Deviation
The M5272C3 User’s Manual Rev 1.4 supplied in this kit is outdated. The following corrections
should be applied:
The “Limited Warranty” (first page) is not valid. Please refer to the separate Warranty
Card, WNTYCARD1YMOT/D, for warranty information.
The “M5272C3 Jumper Setup” section is incorrect for Revision 2.2 of the M5272C3.
Please refer to the silk-screen on the secondary side of the M5272C3 evaluation board
for the correct table.
The Revision 2.2 M5272C3 is populated with a 16MB SDRAM. The manual states that
a 4MB SDRAM is used. Therefore, the memory map on page 3-5 (table 3-1) should
show the SDRAM address range as “0x00000000 to 0x00FFFFFF”.
“Appendix B – PAL Equations” has been updated. Please refer to the M5272C3 web
site for the updated file.
The Schematics shown (Appendix C) are for Revision 1.4 of the M5272C3. Revision
2.2 schematics can be found on the M5272C3 web site.
The BOM (Appendix D) is for Revision 1.4 of the M5272C3. The BOM for Revision
2.2 can be found on the M5272C3 web site.
To access the M5272C3 web site:
Start at http://www.mot.com/coldfire
From the selection box in the upper left corner, choose “Products .&ROG)LUH
Development Tools”
Click “M5272C3” from the list of development systems