Metal Glaze Fixed Resistors Type RGP Series Characteristics Electrical Type RGP Series Metal glaze resistors are manufactured using thick film techniques. The ceramic slugs have the thick film applied, the film is fired and end caps are forced onto the slugs, the resistive element is spiralled to value and lead wires are welded onto the end caps. Rated Power @ 70C (W): Resistance Range (ohms) Min: Max: Tolerance (%): Code Letter: Temp. Coefficient Max (ppm/C): Selection Series: Limiting Element Voltage (V): Maximum Overload Voltage (V): Operating Temp. Range (C): Climatic Category: Voltage Coefficient (%/V): Typical Noise at 47Mohm: Dielectric Strength (V): Insulation Resistance (Mohms): RGP0207CH RGP50 0.25 0.5 1M0 1M0 1G0 3G0 750 1K0 RGP100 RGP200 1 2 1M0 1M0 5G0 5G0 5 10 J K 350 E24 1K5 5K0 2K5 7K5 -55 to +155 55/155/56 0.005 0.75 300 1000 1K0 1K5 RGP300 3 1M0 10G RGP400 4 1M0 10G 10K 15K 15K 20K Four layers of coating are applied the first being a phenolic resin, the other three being epoxy. Dimensions Key Features d D The combination of high values and high working voltage makes these components ideally suited for such applications as TVs, electrical measuring equipment etc.. Thick film metal glaze series for high ohmic values and high voltage surge rating with a range up to 10 Gohm. Style L1 RGP0207CH 6.5 D 0.5 d 0.1 2.5 0.6 l2 28 RGP50 13.0 4.5 0.8 38 RGP100 14.5 5.5 0.8 38 RGP200 27.0 7.0 0.8 38 RGP300 42.0 7.0 0.8 38 RGP400 52.0 8.0 1.0 38 Derating Curve 100 Percent Rated Power L The thick film is suitable for the manufacture of very high resistance values and for high voltage working components. 80 60 40 20 0 40 60 70 80 100 120 140 160 Ambient Temperature (C) Literature No. 1773267 Issued: 06-09 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com Metal Glaze Fixed Resistors Type RGP Series Mounting The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Marking RGP0207CH are marked with a four band colour code in accordance with IEC 62. All others are marked alpha-numerically with the type, value and tolerance. Packaging RGP0207CH resistors are normally supplied taped in 'ammo' boxes of 2000 pieces for the range 1M1 to 100M and in boxes of 1000 for the range 101M to 1G0. All other case sizes are packed loose in polythene bags in quantities of 50 pieces per bag. Please consult the Sales Office for tape/boxed product up to 2 watt case size. Special Requirements Other values and power ratings are available. Contact the Sales Office for special requirements. Performance Characteristics The evaluation of the performance characteristics is carried out with reference to IEC Specifications QC 400 000 and QC 400 100. TEST REF Long Term Tests (2% + 0.05 ohm) 4.23 Climatic sequence 4.24 Damp heat, steady state 4.25.1 Endurance at 70C 4.25.3 Endurance at 155C TEST REF Short Term Tests (1% + 0.05 ohm) 4.13 Overload 4.16 Robustness of terminations 4.18 Resistance to soldering heat 4.19 Rapid change of temperature 4.22 Vibration How to Order RGP 0207CH J 100R Common Part Style Tolerance Value J - 5% 100 ohm (100 ohms) 100R 0207CH - 0.25W RGP - Metal Glaze Fixed Resistor 50 - 0.5W 100 - 1W 1K0 (1000 ohms) 1K0 200 - 2W 100K ohm (100,000 ohms) 100K 300 - 3W 400 - 4W Literature No. 1773267 Issued: 06-09 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com