HEF4015B Dual 4-bit static shift register Rev. 8 -- 21 November 2011 Product data sheet 1. General description The HEF4015B is a dual edge-triggered 4-bit static shift register (serial-to-parallel converter). Each shift register has a serial data input (D), a clock input (CP), four fully buffered parallel outputs (Q0 to Q3) and an overriding asynchronous master reset input (MR). Information present on D is shifted to the first register position, and all the data in the register is shifted one position to the right on the LOW-to-HIGH transition of CP. A HIGH on MR clears the register and forces Q0 to Q3 to LOW, independent of CP and D. The clock input's Schmitt trigger action makes the input highly tolerant of slower clock rise and fall times. It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. 2. Features and benefits Tolerant of slow clock rise and fall times Fully static operation 5 V, 10 V, and 15 V parametric ratings Standardized symmetrical output characteristics Specified from 40 C to +85 C. Complies with JEDEC standard JESD 13-B 3. Applications Serial-to-parallel converter Buffer stores General purpose register 4. Ordering information Table 1. Ordering information All types operate from 40 C to +85 C. Type number Package Name Description Version HEF4015BP DIP16 plastic dual in-line package; 16 leads (300 mil) SOT38-4 HEF4015BT SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 HEF4015B NXP Semiconductors Dual 4-bit static shift register 5. Functional diagram 1Q0 5 7 1D 9 1CP SHIFT REGISTER 4 BITS 1Q1 4 1Q2 3 1Q3 10 6 1MR 2Q0 13 15 2D 1 2CP SHIFT REGISTER 4 BITS 2Q1 12 2Q2 11 2Q3 2 14 2MR 001aae560 Fig 1. Functional diagram Q1 Q0 D D Q FF 1 CP CD D Q FF 2 CP CD Q2 D Q FF 3 CP CD Q3 D Q FF 4 CP CD CP MR 001aae562 Fig 2. Logic diagram for one register HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 2 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 6. Pinning information 6.1 Pinning HEF4015B 2CP 1 16 VDD 2Q3 2 15 2D 1Q2 3 14 2MR 1Q1 4 13 2Q0 1Q0 5 12 2Q1 1MR 6 11 2Q2 1D 7 10 1Q3 VSS 8 9 1CP 001aae561 Fig 3. Pin configuration 6.2 Pin description Table 2. Pin description Symbol Pin Description 1Q0 to 1Q3 5, 4, 3, 10 parallel output 2Q0 to 2Q3; 13, 12, 11, 2 parallel output 1MR, 2MR 6, 14 master reset input (active HIGH) 1D, 2D 7, 15 serial data input VSS 8 ground supply voltage 1CP, 2CP 9, 1 clock input (LOW-to-HIGH edge-triggered) VDD 16 supply voltage 7. Functional description Table 3. Function table [1] number of clock pulse transitions Input 1 D1 L D1 X X X 2 D2 L D2 D1 X X 3 D3 L D3 D2 D1 X 4 D4 L D4 D3 D2 D1 [1] CP Output D MR Q0 Q1 Q2 Q3 X L no change no change no change no change X X H L L L L H = HIGH voltage level; L = LOW voltage level; X = don't care; Dn = either HIGH or LOW; = positive-going transition; = negative-going transition. HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 3 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 8. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDD supply voltage Conditions Max Unit 0.5 +18 V - 10 mA 0.5 VDD + 0.5 V - 10 mA input/output current - 10 mA IDD supply current - 50 mA Tstg storage temperature 65 +150 C Tamb ambient temperature 40 +85 C Ptot total power dissipation IIK input clamping current VI input voltage IOK output clamping current II/O P VI < 0.5 V or VI > VDD + 0.5 V Min VO < 0.5 V or VO > VDD + 0.5 V Tamb = 40 C to +85 C power dissipation DIP16 package [1] - 750 mW SO16 package [2] - 500 mW - 100 mW per output [1] For DIP16 package: Ptot derates linearly with 12 mW/K above 70 C. [2] For SO16 package: Ptot derates linearly with 8 mW/K above 70 C. 9. Recommended operating conditions Table 5. Recommended operating conditions Symbol Parameter Min Typ Max Unit VDD supply voltage 3 - 15 V VI input voltage 0 - VDD V Tamb ambient temperature in free air 40 - +85 C t/V input transition rise and fall rate VDD = 5 V - - 3.75 s/V VDD = 10 V - - 0.5 s/V VDD = 15 V - - 0.08 s/V HEF4015B Product data sheet Conditions All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 4 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 10. Static characteristics Table 6. Static characteristics VSS = 0 V; VI = VSS or VDD unless otherwise specified. Symbol Parameter VIH VIL VOH VOL IOH IOL HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage HIGH-level output current LOW-level output current II input leakage current IDD supply current CI input capacitance HEF4015B Product data sheet Conditions VDD IO < 1 A Tamb = 40 C Tamb = 25 C Tamb = 85 C Min Max Min Max Min Max Unit 5V 3.5 - 3.5 - 3.5 - V 10 V 7.0 - 7.0 - 7.0 - V 15 V 11.0 - 11.0 - 11.0 - V 5V - 1.5 - 1.5 - 1.5 V 10 V - 3.0 - 3.0 - 3.0 V 15 V - 4.0 - 4.0 - 4.0 V 5V 4.95 - 4.95 - 4.95 - V 10 V 9.95 - 9.95 - 9.95 - V 15 V 14.95 - 14.95 - 14.95 - V 5V - 0.05 - 0.05 - 0.05 V 10 V - 0.05 - 0.05 - 0.05 V 15 V - 0.05 - 0.05 - 0.05 V VO = 2.5 V 5V - 1.7 - 1.4 - 1.1 mA VO = 4.6 V 5V - 0.52 - 0.44 - 0.36 mA VO = 9.5 V 10 V - 1.3 - 1.1 - 0.9 mA VO = 13.5 V 15 V - 3.6 - 3.0 - 2.4 mA IO < 1 A IO < 1 A IO < 1 A VO = 0.4 V 5V 0.52 - 0.44 - 0.36 - mA VO = 0.5 V 10 V 1.3 - 1.1 - 0.9 - mA VO = 1.5 V 15 V 3.6 - 3.0 - 2.4 - mA 15 V - 0.3 - 0.3 - 1.0 A 5V - 20 - 20 - 150 A 10 V - 40 - 40 - 300 A 15 V - 80 - 80 - 600 A - - - - 7.5 - - pF IO = 0 A All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 5 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 11. Dynamic characteristics Table 7. Dynamic characteristics VSS = 0 V; CL = 50 pF; Tamb = 25 C. Symbol Parameter Conditions tPHL HIGH to LOW propagation delay nCP to Qn; see Figure 4 nMR to Qn; see Figure 6 LOW to HIGH propagation delay tPLH transition time tt set-up time tsu hold time th pulse width tW recovery time trec maximum frequency fmax [1] Extrapolation formula[1] Min Typ Max Unit 5V 103 ns + (0.55 ns/pF)CL - 130 260 ns 10 V 44 ns + (0.23 ns/pF)CL - 55 110 ns 15 V 32 ns + (0.16 ns/pF)CL - 40 80 ns 5V 78 ns + (0.55 ns/pF)CL - 105 210 ns 10 V 34 ns + (0.23 ns/pF)CL - 45 90 ns 15 V 27 ns + (0.16 ns/pF)CL - 35 70 ns 5V 93 ns + (0.55 ns/pF)CL - 120 240 ns 10 V 44 ns + (0.23 ns/pF)CL - 55 110 ns 15 V 32 ns + (0.16 ns/pF)CL - 40 80 ns VDD nCP to Qn see Figure 4 see Figure 4 nD to nCP; see Figure 5 nD to nCP; see Figure 5 5V 10 ns + (1.00 ns/pF)CL - 60 120 ns 10 V 9 ns + (0.42 ns/pF)CL - 30 60 ns 15 V 6 ns + (0.28 ns/pF)CL - 20 40 ns 5V +25 15 - ns 10 V +25 10 - ns 15 V +20 5 - ns 5V 40 20 - ns 10 V 20 10 - ns 15 V 15 8 - ns nCP LOW; minimum width; see Figure 5 5V 60 30 - ns 10 V 30 15 - ns 15 V 20 10 - ns nMR HIGH; minimum width; see Figure 6 5V 80 40 - ns 10 V 30 15 - ns 15 V 24 12 - ns 5V 50 20 - ns 10 V 30 10 - ns 15 V 20 5 - ns 5V 7 15 - MHz 10 V 15 30 - MHz 15 V 22 44 - MHz pin nMR; see Figure 6 see Figure 5 The typical values of the propagation delay and transition times are calculated from the extrapolation formulas shown (CL in pF). HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 6 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register Table 8. Dynamic power dissipation PD PD can be calculated from the formulas shown. VSS = 0 V; tr = tf 20 ns; Tamb = 25 C. Symbol PD Parameter dynamic power dissipation VDD Typical formula for PD (W) where: 5V PD = 1500 fi + (fo CL) VDD 10 V PD = 6300 fi + (fo CL) VDD2 fo = output frequency in MHz; 15 V PD = 17000 fi + (fo CL) CL = output load capacitance in pF; 2 fi = input frequency in MHz; VDD2 VDD = supply voltage in V; (CL fo) = sum of the outputs. 12. Waveforms VI VM nCP input VSS tPHL VOH tPLH 90 % VM 10 % nQn output VOL tt tt 001aaj464 Measurement points are given in Table 9. Fig 4. Waveforms showing nCP propagation delays and nQn transition times tW VI nCP input VM VM VM VSS 1/fmax th th VI nD input VM VM VM VM VSS tsu tsu 001aae563 The shaded area indicates where the input is permitted to change for predictable output performance. Set-up and hold times are shown as positive values but may be specified as negative values; Measurement points are given in Table 9. Fig 5. Waveforms showing set-up times, hold times, and minimum clock pulse width HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 7 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register VI VM nMR input VM VSS tW trec VI nCP input VM VSS tPHL VOH nQn output VM VOL 001aae564 Measurement points are given in Table 9. Fig 6. Waveforms showing MR recovery time, propagation delay and minimum pulse width Table 9. Measurement points Supply voltage Input Output VDD VM VM 5 V to 15 V 0.5VDD 0.5VDD HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 8 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register tW VI 90 % 90 % negative pulse VM VM 10 % 0V VI 10 % tf tr tr tf 90 % positive pulse 90 % VM VM 10 % 0V 10 % tW 001aaj781 a. Input waveforms VDD VI VO G DUT CL RT 001aag182 b. Test circuit Test data is given in Table 10. Definitions for test circuit: DUT = Device Under Test; CL = load capacitance including jig and probe capacitance; RT = termination resistance should be equal to the output impedance Zo of the pulse generator. Fig 7. Test circuit for measuring switching times Table 10. Test data Supply voltage Input VDD VI tr, tf CL 5 V to 15 V VSS or VDD 20 ns 50 pF HEF4015B Product data sheet Load All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 9 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 13. Package outline DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b b2 MH 9 16 pin 1 index E 1 8 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 b2 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.30 0.53 0.38 1.25 0.85 0.36 0.23 19.50 18.55 6.48 6.20 2.54 7.62 3.60 3.05 8.25 7.80 10.0 8.3 0.254 0.76 inches 0.17 0.02 0.13 0.068 0.051 0.021 0.015 0.049 0.033 0.014 0.009 0.77 0.73 0.26 0.24 0.1 0.3 0.14 0.12 0.32 0.31 0.39 0.33 0.01 0.03 Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEITA ISSUE DATE 95-01-14 03-02-13 SOT38-4 Fig 8. EUROPEAN PROJECTION Package outline SOT38-4 (DIP16) HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 10 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 D E A X c y HE v M A Z 16 9 Q A2 A (A 3) A1 pin 1 index Lp 1 L 8 e 0 detail X w M bp 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 1.05 1.0 0.4 0.7 0.6 0.25 0.25 0.1 0.7 0.3 0.01 0.019 0.0100 0.39 0.014 0.0075 0.38 0.039 0.016 0.028 0.020 inches 0.010 0.057 0.069 0.004 0.049 0.16 0.15 0.05 0.244 0.041 0.228 0.01 0.01 0.028 0.004 0.012 8o o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. Fig 9. REFERENCES OUTLINE VERSION IEC JEDEC SOT109-1 076E07 MS-012 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Package outline SOT109-1 (SO16) HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 11 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 14. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes HEF4015B v.8 20111121 Product data sheet - HEF4015B v.7 Modifications: * * Legal pages updated. Changes in "General description" and "Features and benefits". HEF4015B v.7 20110914 Product data sheet - HEF4015B v.6 HEF4015B v.6 20091103 Product data sheet - HEF4015B v.5 HEF4015B v.5 20090624 Product data sheet - HEF4015B v.4 HEF4015B v.4 20090127 Product data sheet - HEF4015B_CNV v.3 HEF4015B_CNV v.3 19950101 Product specification - HEF4015B_CNV v.2 HEF4015B_CNV v.2 19950101 Product specification - - HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 12 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 15. Legal information 15.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 15.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 15.3 Disclaimers Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 13 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond 15.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com HEF4015B Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 8 -- 21 November 2011 (c) NXP B.V. 2011. All rights reserved. 14 of 15 HEF4015B NXP Semiconductors Dual 4-bit static shift register 17. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 11 12 13 14 15 15.1 15.2 15.3 15.4 16 17 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 4 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 12 Legal information. . . . . . . . . . . . . . . . . . . . . . . 13 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 13 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Contact information. . . . . . . . . . . . . . . . . . . . . 14 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2011. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 21 November 2011 Document identifier: HEF4015B