THA4027030AA007000-40.0M - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processsing does not necessarily include testing of all parameters.

THA4 Series

TCXO / VCTCXO

November 2010

• Pletronics’ THA4 Series is a temperature

compensated crystal oscillator with an optional

voltage control function and a CMOS output.

• The package is designed for high density

surface mount designs.

• Tape and Reel packaging is available.

• 8 to 52 MHz

• Stabilities to less than 0.2 ppm available

• 5 x 7 mm LCC Ceramic Package

• Optional Voltage Control Function (TCVCXO)

Commonly available frequencies (MHz):

8.192 10.000 12.000 12.800 13.000 16.384

19.200 19.440 20.000 24.000 25.000 26.000

Pletronics Inc. certifies this device is in accordance with the

RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 0.3 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020C

Second Level Interconnect code: e4

Absolute Maximum Ratings:

Parameter Unit

VCC Supply Voltage -0.5V to +6.5V

Vi Input Voltage -0.5V to VCC + 0.5V

Vo Output Voltage -0.5V to VCC + 0.5V

Thermal Characteristics

The maximum die or junction temperature is 155oC

The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane

and construction of the PCB.

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 2

Part Number:

THA4 031 035 G H 015 008 -40.0M -XX

Internal code or blank

Nominal Frequency in MHz

Pullability in ppm (Vcontrol)

000 = TCXO only

008 = +_ 8 ppm minimum

015 = +_ 15 ppm minimum

Stability in ppm 002 = +_ 0.2 ppm

010 = +_ 1 ppm 003 = +_ 0.3 ppm

015 = +_ 1.5 ppm 005 = +_ 0.5 ppm

025 = +_ 2.5 ppm 007 = +_ 0.7 ppm

Highest Specified Operating Temperature

A = +40oCE = +60oCJ = +80oC

B = +45oCF = +65oCK = +85oC

C = +50oCG = +70oC

D = +55oCH = +75oC

Lowest Specified Operating Temperatu re

A = +10oCE = -10oCJ = -30oC

B = +5oCF = -15oCK = -35oC

C = +0oCG = -20oCL = -40oC

D = -5oCH = -25oC

Highest Supply Voltage*

055 = 5.5 volts 035 = 3.5 volts

036 = 3.6 volts 030 = 3.0 volts

Lowest Supply Voltage *

045 = 4.5 volts 031 = 3.1 volts

030 = 3.0 volts 027 = 2.7 volts

Series (Part Type, Logic & Package)

* Supply Voltage: Select range between 2.7V and 5.5V with ratio of Highest / Lowest < 1.20

For Example: the part number for 3.3V nominal could be THA4030036.........

Part Marking: Where: yww = Component Date code (Year Week Week)

ff.ffff = frequency in MHz

PTH = Pletronics THA4

ymd = Device Date code (Year Month Day)

Codes for Date Code YMD

Code 01234

Code AB CDE F GH J K L M

Year 2010 2011 2012 2013 2014 Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code 123456789ABCDEFG

Day 12345678910111213141516

Code H J K L M N P R T U V W X Y Z

Day 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

yww

PTHymd

ff.ffff M

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 3

Electrical Specification for specified Vcc over the specified temperature range

Item Min Typ Max Unit Condition

Frequency Range 10 52 MHz See standard frequencies below

Frequency Accuracy 1 -2.5

-0.5 +2.5

+0.5 ppm Vcontrol 1.50 volts if used

Frequency Stability versus

Supply -0.2 +0.2 ppm Load: 15 pF & VCC +_ 5%

Output Waveform CMOS

Output Level High 90 - % of VCC Load: 15 pF

Output Level Low - 10

Output Rise and Fall Time - 8 nS 10% to 90% of VCC Load: 15 pF

Output Duty Cycle 40 60 % 50% of VCC Load: 15 pF

Phase Noise 1 Hz

10 Hz

100 Hz

1 KHz

10 KHz

--62

-91

-116

-137

-145

-dBc/Hz

V Supply Range 1 VCC 2.7 5.5 Volts

Supply Current ICC at 13 MHz

ICC at 26 MHz

ICC at 52 MHz

-3.2

5.0

9.0

- mA 15 pF load @ 3.3 volts

Start-up time - 10 mS to be within ±3 ppm of the final

frequency

Aging -1.0

-0.5 +1.0

+0.5 ppm Per year at 25oC for the first year

For any year thereafter

Vcontrol Range 0.5 2.50 Volts 1.5 volts nominal

Vcontrol Input Current -50 +50 uA

Frequency Pullability 1-15 +15 ppm Frequency dependent

Operating Temperature Range 1-40 +85 oC

Storage Temperature Range -55 +95 oC

1 Specified by part number

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 4

Reliability: Environmental Compliance

Parameter Condition

Mechanical Shock MIL-STD-883 Method 2002, Condition B

Vibration MIL-STD-883 Method 2007, Condition A

Solderability MIL-STD-883 Method 2003

Thermal Shock MIL-STD-883 Method 1011, Condition A

ESD Rating

Model Minimum Voltage Conditions

Human Body Model 1500 MIL-STD-883 Method 3115

Charged Device Model 1000 JESD 22-C101

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 5

12

43

1

4

2

3

Mechanical:

Not to Scale Inches mm

A 0.276 +_0.006 7.00 +_0.15

Pad Function Note B 0.197 +_0.006 5.00 +_0.15

1 Vcontrol Input If this function is not specified, recommend

connecting this pad to ground. C 0.074 +_0.006 1.88 +_0.15

D10.039 1.00

2 Ground (GND) E10.197 5.00

3 Output F10.025 0.90

4 Supply Voltage

(VCC)Recommend connecting appropriate power

supply bypass capacitors as close as

possible.

G10.118 3.00

H10.020 0.50

J10.051 1.30

K

10.154 3.90

1 Typical dimensions

Contacts :

Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm

There are additional pads on the package bottom, these are not to be connected to any traces on the

PCB, solder masking on the PCB should be used to make sure no contact is made.

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 6

260°C M aximum

10 Seconds M aximum

215°C±10°C

Approximately 50 Seconds

Allow ed rate of tem perature change

Maximum 4°C per second

120 to 160 Seconds

100

150

200

250

Temperature (°C)

175°C±10°C

Reflow Cycle (typical for lead free processing)

The part may be reflowed 2 times without degradation.

Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250

Constant Dimensions Table 1

Tape

Size D0 D1

Min E1 P0 P2 S1

Min T

Max

T1

Max

8mm

1.5

+0.1

-0.0

1.0

1.75

+_0.1

4.0

+_0.1

2.0

+_0.05

0.6 0.6 0.1

12mm 1.5

16mm 1.5 2.0

+_0.1

24mm 1.5

Variable Dimensions Table 2

Tape

Size B1

Max E2 Min F P1 T 2

Max W

Max Ao, Bo &

Ko

16 mm 12.1 14.25 7.5 +_0.1 8.0 +_0.1 8.0 16.3 Note 1

Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale

REEL DIMENSIONS

A inches 7.0 10.0 13.0

mm 177.8 254.0 330.2

B inches 2.50 4.00 3.75

mm 63.5 101.6 95.3 Tape

Width

C mm 13.0 +0.5 / -0.2

D mm 16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.0

Reel dimensions may vary from the above

THA4 Series

TCXO / TCVCXO

November 2010

www.pletronics.com 425-776-1880 7

IMPORTANT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing

orders and should verify that such information is current and complete. All products are sold subject to

PLE’s terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE

deems necessary to support this warranty. Except where mandated by specific contractual documents,

testing of all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are

responsible for their products and applications using PLE components. To minimize the risks associated

with the customer products and applications, customers should provide adequate design and operating

safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such

applications is understood to be fully at the risk of the customer. Use of PLE products in such applications

requires the written approval of an appropriate PLE officer. Questions concerning potential risk

applications should be directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a warranty

or endorsement thereof. Use of such information may require a license from a third party under the

patents or other intellectual property of the third party, or a license from PLE under the patents or other

intellectual property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is

without alteration and is accompanied by associated warranties, conditions, limitations and notices.

Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not

responsible or liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by

PLE for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. West Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com