SanDisk(R) Z400s SSD (Solid State Drive) COST EFFECTIVE AND RELIABLE HDD REPLACEMENT The SanDisk(R) Z400s is a cost effective SSD designed to replace HDDs in computing platforms. On par with HDD pricing, it can outperform HDDs by a factor of 20, while providing 5 times the reliability at 1/20th the power consumption. SATA SAS PCIe Z400S KEY FEATURES VERTICALLY INTEGRATED VALIDATION LOW POWER WITH DEVSLP SUPPORT The Z400s is highly versatile and can accommodate a wide range of platforms with its variety of form factors and capacities. It is available in 2.5"/7mm cased, M.2 (2242 & 2280), and mSATA form factors with capacities from 32GB up to 256GB. (Note: M.2 2242 is only available up to 128GB) FOR GREEN, FANLESS DESIGNS 32GB-256GB CAPACITIES 2.5"/7MM CASED, M.2 (2242 & 2280), AND MSATA FORM FACTORS TESTED FOR 20 TBW (32GB), 40 TBW (64GB), AND 72 TBW (128 AND 256GB) SHOCK-RESISTANT HIGHER RELIABILITY THAN HDD S EASY MIGRATION SATA REVISION 3.2 6GB/S INTERFACE WINDOWS(R) WHCK CERTIFIED The Z400s has also been validated for use in several of the top OEM platforms in the industry, demonstrating its endurance and ability to sustain high-volume transactions. Its solid-state design means there are no moving parts, making it shock-resistant and much more reliable than traditional HDDs, which translates into lower total cost of ownership (TCO) and a better end-user experience. Low Power The Z400s utilizes breakthrough SanDisk technology that optimizes power consumption, making it one of the lowest power consuming SSDs at 30mW for average power. This increases the amount of usable hours per battery charge, which is essential for modern mobile devices. TCO SanDisk SSDs are more reliable than HDDs, which can improve total cost of ownership (TCO) by reducing downtime due to hard drive failures. They also offer lower latency and greater read/write speeds over traditional HDDs*, so users may experience a noticeable improvement in responsiveness. IT departments can extend the useful life of their PC inventory by upgrading the HDDs to the Z400s SSD, thus prolonging replacement cycles and maximizing asset value. SanDisk Z400s SSD Product Features and Specifications Specifications are subject to change Device SanDisk Z400s SSD Form Factor 2.5"/7mm cased, M.2 (2242 & 2280), mSATA Interface SATA III (6 Gb/s) backward compatible to SATA II and I Size & Weight 2.5"/7mm cased 7.00mm x 69.85mm x 100.5mm @ 30 1g M.2 2242: 3.50mm x 22.00mm x 42.0mm @ 4.1 0.6g M.2 2280: 2.23mm x 22.00mm x 80.0mm @ 5.5 0.5g mSATA: 3.82mm x 29.85mm x 50.8mm @ 5 0.5g Performance [4KB QD32] 32GB 64GB 128GB 256GB Seq. Read up to (MB/s) 279 546 546 546 1 Seq. Write up to (MB/s) 48 94 182 342 Rand Read up to (IOPS) 17,300 32,900 35,500 36,600 Rand Write up to (IOPS) 10,600 21,700 43,300 69,400 Endurance (TBW) 20 40 72 72 32GB 64GB 128GB 256GB Average Power (mW) 3 30 30 30 30 Active Power (W)3 1.6 1.6 1.6 1.6 Max Read Operating (mW) 1,200 1,600 1,600 1,600 Max Write Operating (mW) 2 Power 1,300 1,500 1,900 2,600 Slumber (mW) 14 14 14 14 DEVSLP (mW) 3 3 3 3 Reliability MTTF4 Up to 1,750,000 hours Environmental Specifications subject to change without notice. * As compared to 7200 RPM SATA 2.5" hard drive. Based on published specifications and internal benchmarking tests. 1 Up to stated speed. Performance is based on the CrystalDiskMark benchmark using a 1000MB LBA range on Gigabyte GA-Z77X-UD5H desktop with Intel Z77 chipset, Intel i7-3770 3.4GHz, 8M, Ivy Bridge, Windows 8 64-bit SP1 using Intel iRST version 11.7.0.1013, secondary drive, C-state off. Performance may vary based on host device. 1 megabyte (MB) = 1 million bytes. IOPS = input/output operations per second. 2 Endurance of the Z400s SSD is calculated using JEDEC client workload (JESD219). TBW = terabytes written. 3 Power measurements 25C. Based on FW version with HIPM-enable. 4 MTTF = Mean Time To Failure based on internal testing using Telcordia stress part testing. 5 3 year warranty in regions not recognizing "limited". See www.sandisk.com/wug for more details. Operating Temperatures SanDisk is a trademark of Western Digital Corporation or its affiliates, registered in the United States and other countries. nCache is a trademark of Western Digital Corporation. Other brand names mentioned herein are for identification purposes only and may be the trademarks of their respective holder(s). Warranty5 Contact information businesspartners@sandisk.com SOLID STATE FOR BUSINESS Western Digital Technologies, Inc. 951 SanDisk Drive Milpitas, CA 95035-7933, USA www.sandisk.com (c)2016 Western Digital Corporation or its affiliates. 0C to 70C Non-operating Temperatures -55C to 85C Operating Vibration 5.0 gRMS, 10 - 2000 Hz Non-operating Vibration Shock 4.9 gRMS, 7 - 800 Hz 1,500 G @0.5 msec half sine Certifications FCC, UL, TUV, KC, BSMI, VCCI 5 Years Ordering Information Form Factor Capacity SKU # 2.5"/7mm cased 32GB SD8SBAT-032G 2.5"/7mm cased 64GB SD8SBAT-064G 2.5"/7mm cased 128GB SD8SBAT-128G 2.5"/7mm cased 256GB SD8SBAT-256G mSATA 32GB SD8SFAT-032G mSATA 64GB SD8SFAT-064G mSATA 128GB SD8SFAT-128G M.2 2242 32GB SD8SMAT-032G M.2 2242 64GB SD8SMAT-064G M.2 2242 128GB SD8SMAT-128G M.2 2280 64GB SD8SNAT-064G M.2 2280 128GB SD8SNAT-128G M.2 2280 256GB SD8SNAT-256G Western Digital Technologies, Inc. is the seller of record and licensee in the Americas of SanDisk(R) products. Pack-Out Option Use: -1122 = Individual Package