1996 Dec 03 1
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
TAPING
Philips radial, solid and non-solid aluminium electrolytic capacitors in sizes up to ∅D = 16 mm, are available in taped
version corresponding to
“IEC 286-2”
or
“JIS C 0805”
respectively. They are most suitable for use on automatic insertion
machines, mounting robots or cutting and forming equipment and are supplied in box (ammopack).
For catalogue numbers, refer to the relevant detail specification in this data handbook.
The information contained within this part is valid for the following series:
•RLC 013
•RSP 036
•RB 036 92
•RBA 036 93
•RLL 116.
CAUTION
Packages must be handled with care to avoid bent leads
handbook, full pagewidth
∆h
∆h
MBC519
∆p
∆p
P
DO
P2
FP1dO
H
A
H11.5
max
detail A
A
0.9
max
18
0.5
6
min
2.5
max
12.7 0.3(1)4
0.2
9
0.5
11
max
1 max
Dimensions in mm.
Form TNA:case ∅D×L=5×11 mm; F = 2.5 mm.
Form TFA:case ∅D×L = 8.2 ×11 mm; F = 5 mm.
For dimensions see Table 1.
(1) Tolerance over any 20 pitches: ±1.0 mm.
Fig.1 Capacitors on tape, straight leads.
1996 Dec 03 2
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Table 1 Dimensions of capacitors on tape; see Figs 1 and 2
PARAMETER
NOMINAL CASE SIZE (∅D×L) in mm
TOLERANCE
FORM TNA: F = 2.5 mm FORM TFA: F = 5 mm
5×11
(straight leads)
(mm)
5×11
(formed leads)
(mm)
8.2 ×11
(straight leads)
(mm)
∅D 5.5 5.5 8.7 max.
A 12 12 12 max.
∅d 0.5 0.5 0.6 ±0.05
P 12.7 12.7 12.7 ±1.0
P15.1 3.85 3.85 ±0.7
P26.35 6.35 6.35 ±0.7
F 2.5 5.0 5.0 +0.6/−0.1
∆h0 0 0±2.0
∆p0 0 0±1.3
H 18 18 18 +1.5/−0
H0−16 −±0.5
H132 32 32 max.
Fig.2 Capacitors on tape, formed leads.
Dimensions in mm.
Form TFA:case ∅D×L=5×11 mm; F = 5 mm.
For dimensions see Table 1.
handbook, full pagewidth
MBC520
P1
H0
1996 Dec 03 3
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Series RLC 013, RSP 036, RB 036 92, RBA 036 93 and RLL 116 (continued)
QUANTITIES PER PACKAGING UNIT
Table 2 Number of capacitors per packaging unit
Note
1. Ammopack taping (Form TFA) case ∅D×L=8.2×11 mm. To ensure optimum straightness of the leads and correct
position of the capacitors in the folding area of the zig-zag shaped tape, every 25th capacitor is omitted.
NOMINAL
CASE SIZE
(∅D×L)
(mm)
CASE
CODE
BULK
PER BOX TAPED
AMMOPACK(1)
FORM
CA FORM
CB FORM
TFA FORM
TNA
5×11 11 1000 1000 2000 2000
8.2 ×11 13 1000 1000 1000 1000
Fig.3 Ammopack; Forms TFA and TNA.
Dimensions in mm.
handbook, full pagewidth
CCA414
54
max.
340 max.
305
max.
1996 Dec 03 4
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
The information contained within this part is valid for the following series with a case ∅D=3to8mm:
•RLP 5-134
•RLP 7-097
•RSM 037
•RSH 044
•RLI 135.
For catalogue numbers, refer to the relevant detail specification in this data handbook.
Fig.4 Capacitors on tape, straight leads.
Dimensions in mm.
Form TNA:
Case ∅D×L=5×11 mm; F = 2.5 mm (leads slightly bent).
Case ∅D×L = 6.3 ×11 mm; F = 2.5 mm.
Case ∅D×L=8×12 mm; F = 3.5 mm.
For dimensions see Table 3.
(1) Tolerance over any 20 pitches: ±1.0 mm.
handbook, full pagewidth
MBC523
∆p
∆p
P
DO
P2
FP1dO
H
A
H1
∆h
∆h
1.5
max
detail A
A
4
0.2
11
max
12.5
max
12.7 0.3 1)
0.9
max
18
0.5
2.5
max
1.0
max
9.0 0.5
1996 Dec 03 5
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Table 3 Dimensions of capacitors on tape; see Figs 4 and 5
PARAMETER
NOMINAL CASE SIZE (∅D×L) in mm
TOLERANCE
FORM TNA FORM TFA
5×11
(mm) 6.3 ×11
(mm) 8×12
(mm) 5×11
(mm) 6.3 ×11
(mm) 8×12
(mm)
∅D 5.5 6.8 8.5 5.5 6.8 8.5 max.
A 12.5 12.5 13 12.5 12.5 13 max.
∅d 0.5 0.6 0.6 0.5 0.6 0.6 ±0.05
P 12.7 12.7 12.7 12.7 12.7 12.7 ±1.0
P15.1 5.1 4.6 3.85 3.85 3.85 ±0.7
P26.35 6.35 6.35 6.35 6.35 6.35 ±1.0
F 2.5 2.5 3.5 5.0 5.0 5.0 +0.8/−0.2
∆h 000000 ±2.0
∆p 000000 ±1.3
H 18.5 18.5 20 18.5 18.5 20 ±0.75
H0−−−16 16 16 ±0.5
H132.2 32.2 32.2 32.2 32.2 32.2 max.
handbook, full pagewidth
MBC524
P1
H0
Fig.5 Capacitors on tape, formed leads.
Dimensions in mm.
Form TFA: F = 5 mm.
Case ∅D×L=5×11, 6.3 ×11 and 8 ×12 mm.
For dimensions see Table 3.
1996 Dec 03 6
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Series RLP 5-134, RLP 7-097, RSM 037, RSH 044 and RLI 135, ∅D=3to8mm (continued)
Table 4 Dimensions of capacitors on tape; see Fig.6
PARAMETER
NOMINAL CASE SIZE (∅D×L) in mm
TOLERANCE
FORM TFA
3×5
(mm) 3.5 ×5
(mm) 4×5
(mm) 5×5
(mm) 6.3 ×5
(mm) 4×7
(mm) 5×7
(mm) 6.3 ×7
(mm) 7×7
(mm)
∅D 3.5 4.0 4.5 5.5 6.8 4.5 5.5 6.8 7.5 max.
A 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 max.
∅d 0.4 0.4 0.45 0.45 0.45 0.45 0.45 0.45 0.45 ±0.05
P 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 ±1.0
P15.1 5.1 3.85 3.85 3.85 3.85 3.85 3.85 3.85 ±0.7
P26.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 ±1.0
F 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 +0.8/−0.2
∆h 000000000 ±2.0
∆p 000000000 ±1.3
H 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 ±0.75
H016 16 16 16 16 16 16 16 16 ±0.5
H132.2 32.2 32.2 32.2 32.2 32.2 32.2 32.2 32.2 max.
handbook, full pagewidth
MBC581
P
DO P2
FP1d
O
H
A
H1
∆h
detail A
A
∆p
∆p
H0
1.5
max
4
0.2
11
max
1.5
max
12.7 0.3 1)
0.9
max
6.0
min 18
0.5
1.0
max
9.0 0.5
Fig.6 Capacitors on tape.
Dimensions in mm.
Form TFA.
Height = 5 to 7 mm.
For dimensions see Table 4.
(1) Tolerance over any 20 pitches: ±1.0 mm.
1996 Dec 03 7
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
QUANTITIES PER PACKAGING UNIT
Table 5 Number of capacitors per packaging unit
NOMINAL
CASE SIZE
(∅D×L)
(mm)
CASE
CODE
BULK
PER BOX TAPED
AMMOPACK
FORM
CA FORM
TFA FORM
TNA
3×5 51 3000 3000 −
3.5 ×5 52 3000 3000 −
4×5 53 2000 2000 −
5×5 54 2000 2000 −
6.3 ×5 55 2000 2000 −
4×7 71 2000 2000 −
5×7 72 1000 2000 −
6.3 ×7 73 1000 2000 −
7×7 74 1000 1000 −
5×11 11 3000 2000 2000
6.3 ×11 12 2000 2000 2000
8×12 13 1000 1000 1000
Fig.7 Ammopack; Forms TFA and TNA.
Dimensions in mm.
handbook, full pagewidth
CCA414
54
max.
340 max.
305
max.
1996 Dec 03 8
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
The information contained in this part is valid for the following series with a case ∅D=10to16mm:
•RSM 037
•RSH 044
•RSL 046
•RMS 047
•RML 048
•RLI 135
•RVI 136
•RHT 165.
For catalogue numbers, refer to the relevant detail specification in this data handbook.
handbook, full pagewidth
MBC525
P
DO
P2
FP1dO
H
A
H1
∆h
∆h
A
detail A
4
0.2
9
0.5
1.5
max
12.7 0.3 1) 0.9
max
12 min
1.5
max
18
0.5
Fig.8 Capacitors on tape.
Dimensions in mm.
Case ∅D = 10 mm.
For dimensions see Table 6.
(1) Tolerance over any 20 pitches: ±1.0 mm.
1996 Dec 03 9
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Table 6 Dimensions of capacitors on tape; see Figs 8 and 9
PARAMETER NOMINAL CASE SIZE (∅D×L) in mm TOLERANCE
10 ×12
(mm) 10 ×16
(mm) 10 ×20
(mm) 12.5 ×20
(mm) 12.5 ×25
(mm) 16 ×20
(mm) 16 ×25
(mm) 16 ×31
(mm)
∅D 10.5 10.5 10.5 13.0 13.0 16.5 16.5 16.5 max.
A 13.5 17.5 22 22 27 22 27 33.5 max.
∅d 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 ±0.05
P 12.7 12.7 12.7 25.4 25.4 25.4 25.4 25.4 ±1.0
P13.85 3.85 3.85 3.85 3.85 8.95 8.95 8.95 ±0.7
P26.35 6.35 6.35 6.35 6.35 12.7 12.7 12.7 ±1.3
F 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 +0.8/−0.2
∆h00000000 ±3.0
H 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 ±0.75
H1H1=H+A
B 54 62 62 62 68 68 68 75 max.
Fig.9 Capacitors on tape.
handbook, full pagewidth
P
P2
P1
MAM158
P
P2
P1
Case ∅D = 12.5 and 16 mm.
For dimensions see Table 6.
∅D = 12.5 mm. ∅D = 16 mm.
1996 Dec 03 10
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Series RSM 037, RSH 044, RSL 046, RMS 047, RML 048, RLI 135, RVI 136 and RHT 165
with a case ∅D = 10 to 16 mm (continued)
QUANTITIES PER PACKAGING UNIT
Refer to the relevant detail specification in this data handbook.
Note
1. Ammopack taping (Form TFA). To ensure optimum straightness of the leads and correct position of the components
in the folding area of the zig-zag shaped tape, where necessary, one capacitor is omitted at each folding edge.
Fig.10 Ammopack; Form TFA.
Dimensions in mm.
For dimension B, see Table 6.
handbook, full pagewidth
CCA429
340 max.
310
max.
B
max.
1996 Dec 03 11
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
The information contained within this part is valid for the following series:
•SAL-RP 122
•SAL-RPM 128.
For catalogue numbers, refer to the relevant detail specification in this data handbook.
Table 7 Tape dimensions (in mm) for solid radial capacitors; see Fig.11
PARAMETER
SAL-RP 122
MAX. HEIGHT 12.5 mm SAL-RPM 128
MAX. HEIGHT 9.5 mm TOLERANCE
CASE CODE CASE CODE
1 2 3 4 102030405060
T 3.5 4.5 5.0 6.0 3.0 3.5 4.0 5.0 5.0 6.0 max.
Wb8.0 8.0 8.0 8.0 7.0 7.0 7.0 7.0 8.0 8.0 max.
∅d 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 +0.02/−0
P 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 ±1.0
P13.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 ±0.7
P26.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 ±1.0
F 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 ±0.2
∆h 0000000000 ±1.0
H 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 ±0.75
H132 32 32 32 28 28 28 28 28 28 max.
handbook, full pagewidth
MBC574
O d
F
P1
P2PWb
H
H1
T
∆ h
A
detail A
4
0.2
11
max 6
0.5
0.2
max
12.7 0.2 1)
0.9
max
18
0.5
0.5
max
9.0 0.5
0.2
Fig.11 Capacitors on tape.
Dimensions in mm.
Maximum height = 9.5 or 12.5 mm.
For dimensions see Table 7.
→ direction of tape transport for Form TR+ (positive leading).
(1) Tolerance over any 20 pitches: ±1.0 mm.
1996 Dec 03 12
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
Table 8 Ammopack dimensions for the relevant case codes
PARAMETER SAL-RP 122 SAL-RPM 128 Amax
(mm) Bmax
(mm)
Case code 1 and 2 10; 20 and 30 340 266
3 and 4 40; 50 and 60 340 176
Fig.12 Ammopack; Form TFA.
Dimensions in mm.
PREFERRED PACKING.
For dimensions see Table 8.
handbook, full pagewidth
CCA430
52
max.
A
B
1996 Dec 03 13
Philips Components
Electrolytic Capacitors Packaging
Radial Electrolytic Capacitors
QUANTITIES PER PACKAGING UNIT
Table 9 Number of capacitors per packaging unit
CASE SIZE
Hmax ×Wmax ×Tmax
(mm)
CASE
CODE
BULK
PER BOX TAPED
PER REEL TAPED
PER BOX
FORM CA FORM CB FORM TR+ FORM TFA
12.5 ×8.0 ×3.5 1 1000 1000 2000 2000
12.5 ×8.0 ×4.5 2 1000 1000 2000 2000
12.5 ×8.0 ×5.0 3 1000 1000 1000 1000
12.5 ×8.0 ×6.0 4 800 1000 1000 1000
9.5 ×7.0 ×3.0 10 1000 1000 2000 2000
9.5 ×7.0 ×3.5 20 1000 1000 2000 2000
9.5 ×7.0 ×4.0 30 1000 1000 2000 2000
9.5 ×7.0 ×5.0 40 1000 1000 1000 1000
9.5 ×8.0 ×5.0 50 1000 1000 1000 1000
9.5 ×8.0 ×6.0 60 1000 1000 1000 1000
handbook, full pagewidth
MBC573
3
2
1
4
5
30 77 85.6 355
22
3
42
52
Fig.13 Reel; Form TR+.
1 = capacitor.
2 = tape.
3 = paper.
4 = flange.
5 = cylinder.
Dimensions in mm.
