KBJ(10.15.25)005 THRU KBJ(10.15.25)10 Voltage Range -50 to 1000 Volts Current -10/-15/-25 Ampere SILICON BRIDGE RECTIFIERS GLASS PASSIVATED BRIDGE RECTIFIERS Features Rating to 1000V PRV ldeal for printed circuit board Low forward voltage drop, high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has UL flammability classification 94V-0 1.193(30.3) 1.169(20.7) .189(4.8) .173(4.4) .134(3.4) .122(3.1) .119(.5) .150(3.8) .134(3.4) .441(11.2) .425(10.8) .800(20.3) .697(17.7) .106(2.7) .096(2.3) .094(2.4) .078(2.0) .165(4.2) .150(3.8) .043(1.1) .035(.9) .114(2.9) .098(2.5) .031(.8) .023(.6) .402 .303 .303 .386 .287 .287 (10.2)(7.7) (7.7) (9.8) (7.3) (7.3) Dimensions in inches and(millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 Cambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% T ype Number Maximum Recurrent Peak Reverse Voltage KBJ 10005 KBJ 1001 KBJ 1002 KBJ 1004 KBJ 1006 KBJ 1008 KBJ 1010 KBJ 1505 KBJ 1501 KBJV 1502 KBJ 1504 KBJ 1506 KBJV 1508 KBJ 1510 KBJ 2505 KBJ 2501 KBJV 2502 KBJV 2504 KBJ 2506 KBJ 2508 KBJ 2510 100 200 400 600 800 1000 280 420 560 700 400 600 800 1000 50 Maximum RMS Bridge Input Voltage 35 70 140 Maximum DC Blocking Voltage 50 100 200 Maximum Average Forward (With heatsink Note 2) Rectified Current @T c = 100 C ( Without heatsink) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Super imposed on Rated Load(JEDEC Method) Maximum Instantaneous Forward Voltage @5.0A Peak Maximum DCBlocking ReverseVCurrent @T =25 C at Rated DC J oltage @T =125 C I2 t Rating for fusing(t<8.3ms) Typical Junction Capacitance per element(Note 1) 10A 15A 25A Units V V V 10/15/25 3.0/3.2/4.2 A 170 240350 A 1.05 5.0/10/10 500 120/240/510 55/60/85 Typical Thermal Resistance(Note 2) 1.4/0.8/0.6 Operating Temperature Range TJ -55 to +150 Notes: Storage Temperature Range TSTG -55 to +150 Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2. Device mounted on 150mmX150mmX1.6mm Cu Plaate Heatsink V uA A'S pF CW/ C C RATINGS AND CHARACTERISTIC CURVES (KBJ(10.15.25)005 THRU KBJ(10.15.25)10) FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENTA FIG.1-FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT. (A) 8 Single PHASE Half-Wave 60Hz RESISTIVE OR INDUCTIVE LOAD 6 4 WITH HEATSINK 2 WITHOUT HEATSINK 0 20 40 60 80 100 120 CASE TEMPERATURE. ( C) 180 160 140 120 100 80 60 40 0 140 o Single Half-Sine-Wave(JEDEC METHOD) 20 0 10 100 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERICS FIG.3- TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT. (A) 10 100 10 1.0 0.1 TJ=25 0C f=1MHz 0 Tj=25 C PULSE WIDTH-300 S 1 0.01 1.0 4.0 10.0 100 .4 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE. (V) REVERSE VOLTAGES, VOLTS FIG.5- TYPICAL REVERSE CHARACTERISTICS 1000 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 10 C TJ=125o 100 C TJ=100o 10.0 C TJ=50o 1.0 C TJ=A25o .1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1.6