Transitions QFT Configurable Heat-Shrink Transition Product Facts n Configurable heat-shrink transition n Low cost commercial polyolefin n 80C [176F] shrink temperature n High shrink ratio n Specially engineered easy-to-use crimp tool 4 Molded Parts H Dia. J Dia. Expanded Recovered P JO H Dia. J Dia. HW J Dia. H Dia. JW them to be employed as 1:2, 1:3, and even 1:4 tranQFT heat-shrinkable transitions form a watertight seal P sitions. With their high shrink ratio and crimps the configprotecting cable splices JO from corrosion and mechan- urable QFT product line can accommodate almost all of ical abuseHW while providing J Dia. H Dia. excellent electrical insulating your transition needs with sizes. only 3 product JW properties. QFT products use special crimps that allow Operating Temperature Range Specifications/Approvals Raychem RW 2008 RT1050/1 Molded Part Adhesive Temperature Ratings Operating temperature range Minimum recovery temperature Maximum storage temperature -20C to 70C [-4F to 158F] (125C [257F] without sealant) 55C [131F] 40C [104F] Applications Dimensions Table QFT1 QFT2 QFT3 H Max. Min. 31.0 [1.22] 9.0 [.35] 43.0 [1.69] 14.0 [.55] 57.0 [2.24] 24.0 [.95] J Min. 31.0 [1.22] 43.0 [1.69] 57.0 [2.24] Max. 4.4 [.17] 7.0 [.28] 12.0 [.47] -20C to 70C [-4F to 158F] P +/- 10% JO +/- 10% HW +/- 20% JW +/- 20% 60.0 [2.36] 75.0 [2.95] 90.0 [3.53] 12.0 [.47] 18.0 [.71] 25.0 [.98] 1.5 [.06] 1.8 [.07] 1.8 [.07] 1.0 [.039] 1.0 [.039] 1.0 [.039] 4-87 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171 Transitions QFT (Continued) Typical QFT Performance Physical Electrical Chemical Part Numbering System Property Tensile strength Ultimate elongation Longitudinal change Specific gravity Heat aging 168 hours at 120C [248F] Heat shock 4 hours at 105C Dielectric strength Fluid resistance 1 Engine Oil Hydraulic Fluid Tensile Strength Ultimate Elongation Fluid resistance 2 Automotive gasoline Diesel fuel Cleaning fluid Antifreeze Engine cleaning fluid Tensile strength Ultimate elongation Performance 10 MPa (1500psi) minimum 250% minimum 0 to 20% maximum 1.4 maximum Minimum 200% ultimate elongation Tensile Strength 10 MPa min. Test method ISO 37 ISO 37 ISO 1183 ISO 1183 ISO 188 ISO 37 No cracking, dripping or flowing ASTM D 2671 8MV/m minimum (24 +/- 2h immersion at 23C+/- 2C) (SAE 20W/50) IEC 243-1 ISO 1817 -- 10 MPa minimum 200% minimum (30 +/- 3m immersion at 23C+/- 2C) (BS 4040) (BS 2869) (TL 6850-07) (Ethylene Glycol/Water 50/50 v/v) (Gunk) 10 MPa minimum 200% minimum ISO 37 -- ISO 1817 -- -- -- -- ISO 37 -- QFT3 - 130/42 - 0* Color Adhesive Material Size Product name *Available in bulk pack, part number QFT3-130/42-0-B500 (US and UK). Ordering Information Color Standard Code Standard Packaging Crimp tool Bulk pack QFT-Crimp-Tool-Manual (069172-000) Black (-0) 0 10 pieces per bag, 30 clips 500 pieces per box and 500 clips per bag (clips ordered separately) - contact Tyco Electronics for details -- 4-88 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171