V10
1
CHASSIS MOUNT
DC-DC CONVERTERS
QUARTER BRICK PACKAGE
WITH HEATSINK
50 TO 100 WATT 4:1 INPUT RANGE
* 50-100W Isolated Output
* 4:1 Wide Input Range
* Chassis Mount/Din Rail Mount
* Input Over Voltage Protection
* Regulated Outputs
* Continuous Short Circuit Protection
* CE Mark Meets 2004/108/EEC
* Safety Meets UL60950-1, EN60950-1, and
IEC60950-1
* UL60950-1 Approval for DC Modules
Ordering Information
CHB(E)XXX-
XX S XX N -XXX +X-XXXX
Model No. Nominal Input Voltage
Single Output
Output Voltage
Remote ON/OFF
CM: Chassis Mount
DIN: Din Rail Mount
Heat Sink Type
(Option)
CQE50W
CQB75W
CQB100W
24: 24VDC
48: 48VDC
3V3 : 3.3VDC
05 : 5VDC
12 : 12VDC
15 : 15VDC
24 : 24VDC None: Positive Logic
N: Negative Logic
M-C448
M-C421
CQE50W 48 : 48VDC
CQB100 110 : 110VDC 05 : 5VDC
12 : 12VDC
24 : 24VDC
Require input an aluminum capacitor connected in the table below.
MODEL NUMBER INPUT
CQE50W-XXSXX-CM/DIN 220uF/100V for 24Vin Models
47uF/100V for 48Vin Models
CQB75W-XXSXX-CM/DIN 220uF/100V for 24Vin Models
CQB100W-XXSXX-CM/DIN 100uF/100V for 24Vin Models
47uF/100V for 48Vin Models
CQB100-110SXX-CM/DIN 120uF/200V
NOTE:
1. Short JP1 to connect +S and +Vo, JP2 to connect –S and –Vo with local sense.
2. Remove jumper( JP1& JP2),terminal block port +S,-S & Trim can be used to Output Remote Sensing or Output
Voltage Adjustment functional(see application note).
3. Thermal resistance is referenced to the application note.
4. Include TVS for input surge voltage protection.
5. Recommend external fuse for input reverse polarity protection (Include shunt diode inside).