Anti-Pulse Power Resistors Anti-Pulse Power Resistors Type: ERGD (0.5 W, 1 W, 2 W, 3 W) Features Miniaturized Non-flammable Anti-Pulse Characteristic Automatic Insertion RoHS compliant Explanation of Part Numbers 1 2 3 & 3 ( Product Code Anti-Pulse Power Resistors 4 Power Rating 12 0.5 W 1 1W 2 2W 3 3W 5 6 7 % + 8 Resistance Value The first two digits are significant figures of resistance and the third one denotes number of zeros following. Resistance Tolerance G 2 % J 5 % 9 10 11 12 Forming & Taping matrix 12D 1D 2D 3D Straight lead wire type ? ? ? ? Axial paping type (Straight lead) ? ? ? ? Cut & Forming type ? ? ? ? Axial paping type (Stand off) ? ? Radial Taping type (E type) ? ? ? Radial Taping type (WE type) ? ? ? ? Forming / Packaging Code <***< <***V <***P U***V <***E W***E The above example shows an anti-pulse resistor, 2 W power rating, resistance value of 220 k ohms, tolerance 5 %, and package of standard bulk packing. Construction Dimensions in mm (not to scale) High reliable special film Lead wire > fD > L fd Ceramic core (High thermal conductivity) Dimensions (mm) Type Spiralling turns 0D L Marking 0d k Mass (Weight) [g/pc.] +0.65 2.3 -0.3 +0.5 30.0 3.0 0.65 0.05 0.26 +1.50 2.8 0.5 30.0 3.0 0.65 0.05 0.33 12.00 -1.00 +1.50 4.0 1.0 30.0 3.0 0.80 0.05 0.66 1.50 5.5 1.0 38.0 3.0 0.80 0.05 1.47 ERG12D 6.35 -0.35 ERG1D 9.00 -1.00 ERG2D ERG3D 15.00 Flame and solvent retardant End cap Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Aug. 2012 - 55 - Anti-Pulse Power Resistors Ratings Type Power Rating at 70 C (W) Limiting Element (1) Voltage (V) Maximum Dielectric Maximum WithIntermittent Overload standing Overload (2) Voltage (3) Voltage Voltage (V) (VAC) (V) ERG12D 0.5 400 800 800 500 ERG1D 1 500 1000 1000 500 ERG2D 2 500 1000 1000 700 ERG3D 3 500 1000 1000 700 Resistance (4) Range () Res. Tol. (%) J G J G J G J G (5) (2) (5) (2) (5) (2) (5) (2) Standard Resistance Value min. max. 51 k 240 k E24 110 k 330 k E24 110 k 510 k E24 110 k 750 k E24 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Power RatingxResistance Value or Limiting Element Voltage listed above whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5xPower Rating or max. Overload Voltage listed above whichever less. (3) Intermittent Overload Test Voltage (IOTV) shall be determined from IOTV=4.0xPower Rating or max. Intermittent Overload Voltage listed above whichever less. (4) Resistance tolerance and resistance range is of use besides range listed, please inquire. 120 -55 C Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 C, power rating shall be derated in accordance with the figure on the right. 70 C 100 80 ERG1D ~ 3D 60 ERG12D 40 20 130 C 0 -60 -40 -20 0 235 C 20 40 60 80 100 120 140 160 180 200 220 240 Ambient Temperature (C) Packaging Methods and / or cut formed leads Please see Metal (Oxide) Film Resistors Packaging Methods Safety Precautions The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors shown on this catalog. 1. Transient voltage If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of Anti-Pulse Power Resistors (hereafter called the resistors) mounted on your product rather than only depending on the calculated power limit or steady-state conditions to complete the design or decide to use the resistors. 2. The resistors are covered with a special coating. Do not apply shock or vibration to them, or pinch them with long-nose pliers. Otherwise, the resistors may be damaged. 3. Do not apply excessive tension to the lead-connected sections. When bending the lead wire, do not apply excessive stress to the resistors and provide the wire with a natural curvature. 4. Do not brush the resistors during or after the cleaning process, which may be conducted after soldering. Otherwise, the coating film may be damaged. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Aug. 2012 - 56 - Metal (Oxide) Film Resistors Packaging Methods Taped & Box: Stand-off Taped & Box: ERG(X)SV ERG(X)SUV P W1 P fd fd 6.00.5 H H crush width 0.8 mm (1 W) 1.1 mm (2 W, 3 W) W W Standard Quantity (pcs./box) Part Number ERG(X)12SV Taping (mm) P 0.3 2000 5.0 50xP W 250 2 52.0 1.5 250 2 52.0 1.5 Box (mm) H W1 -- -- -- -- 0d 0.05 0.65 a b c 85 80 255 b ERG(X) 1SV ERG(X) 1SUV ERG(X) 2SV ERG(X) 2SUV ERG(X) 3SV ERG(X) 3SUV 2000 5.0 1000 5.0 1000 0.3 0.3 10.0 0.5 250 500 2 2 52.0 74.0 +0 +0.15 12.0 -2.0 1.2 - 0 1.5 -- -- +0 -2.0 15.5 2.0 -- +0.15 -0 1.4 -- +0 +0.15 23.0 -2.0 1.4 - 0 0.05 0.65 85 80 255 Ma rkin g 0.05 0.80 0.05 0.80 85 80 255 105 100 325 c a Cut & Formed Type ERG(X)SP Part Number fD f 0.650.05 (0.5 W, 1 W) f 0.800.05 (2 W, 3 W, 5 W) S L Upper surface h of PW board h2 0.8 (0.5 W, 1 W) 1.0 (2 W, 3 W, 5 W) 1.20.2 (0.5 W, 1 W) 1.40.2 (2 W, 3 W, 5 W) Standard Quantity (pcs./box) Dimensions (mm) 0D L +0.65 -0.35 2.3 +1.50 2.8 S 10.0 0.5 12.5 1.0 15.0 1.0 20.0 1.0 30.0 h +0.5 -0.3 ERG(X)12SP 1000 6.35 ERG(X)1SP 1000 9.00 -1.00 ERG(X)2SP 1000 12.00 -1.00 +1.50 4.0 ERG(X)3SP 1000 15.00 1.50 5.5 ERG(X)5SP 500 24.00 1.50 8.0 1.5 4.0 1.5 4.0 1.5 6.0 2.0 6.5 2.0 7.5 h2 1.5 4.0 1.5 1.5 4.0 1.5 4.0 1.5 4.0 1.5 4.0 1.5 1.5 1.5 1.5 ERG(X)FPH Standard Quantity (pcs./box) L ERG(X)1FH 1000 9.0 -1.0 ERG(X)2FH 1000 12.0 -1.0 +1.5 4.0 ERG(X)3FH 1000 15.0 1.5 5.5 ERG(X)5FH 500 24.0 1.5 8.0 Part Number S L fD f 0.800.05 Dimensions (mm) 0D +1.5 S 0.5 12.5 1.0 15.0 1.0 20.0 1.0 30.0 h 2.8 1.5 8 1.5 6 2.0 10 2.0 10 h2 2 4.0 1.5 2 5.0 1.5 h Upper surface of PW board h2 2 5.0 1.5 2 5.0 1.0 1.40.2 1.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Aug. 2012 - 50 - Metal (Oxide) Film Resistors Packaging Methods For Panasert Automatic Insertion Machine Radial Tape & Box Type ERG(X)SE (12S, 1S, 2S) P Insulated Lead P2 A fD F W1 H0 H1 P1 fD0 P0 Dimensions (mm) P P0 Dimensions (mm) 12.71.0 W 12.70.3 Dimensions (mm) 18.00.5 W1 12S 9.00.5 H1 Dimensions (mm) 32 max. 1S 3.850.70 P2 6.351.00 H0 2S 16.00.5 F 5.00.8 0D0 4.00.2 A 38 max. 6.35 1S 9.0 2S 0d Dimensions (mm) +0.65 -0.35 12S 32 max. 1 P W fd +1.5 -1.0 12.0 0D +1.5 -1.0 +0.5 12S 2.3 -0.3 1S 2.80.5 2S 4.01.0 0.650.05 Radial Tape Package Specifications Dimensions (mm) b Part Number Marking Standard Quantity (pcs./box) a b c ERG(X)12SE 46 130 335 2000 ERG(X) 1SE 46 130 335 2000 ERG(X) 2SE 49 100 335 1000 c a For Panasert Automatic Insertion Machine Radial Taped & Box Type ERG(X)SWE (12S, 1S, 2S, 3S) Dimensions (mm) P P1 P P0 B P1 H1 fD A F W1 12S 12.70.3 1S, 2S, 3S 15.00.3 12S A 4.00.2 +0.65 6.35 -0.35 +1.5 -1.0 1S 9.0 2S 12.0 -1.0 +1.5 12S 6.351.00 3S 15.01.5 1S, 2S, 3S 7.51.0 12S 11.2 max. 1S 14.0 max. 12S 3.850.70 1S, 2S, 3S 3.750.50 12S B 17.0 max. 21.0 max. 1S, 2S, 3S 7.50.8 12S 2.3 -0.3 12S, 1S, 2S, 3S 18.00.5 1S 2.80.5 W1 12S, 1S, 2S, 3S 9.00.5 H0 fD0 30.01.0 3S W P0 1S, 2S, 3S 0D 0 12S, 1S, 2S, 3S 5.00.5 W fd 12.71.0 2S F H0 P2 P2 Dimensions (mm) 12S H1 12S 16.00.5 1S, 2S 18.01.0 3S 19.01.0 12S 6.5 - 0 1S, 2S 6.5 - 0 3S 0D 0d +0.5 2S 4.01.0 3S 5.51.0 12S 00.650.05 1S, 2S, 3S 00.800.05 +0.6 +1.0 8.0 +1.0 -0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Aug. 2012 - 51 - Metal (Oxide) Film Resistors Packaging Methods For Panasert Automatic Insertion Machine Radial Taped & Box Type ERG(X)FSE (1F, 2F, 3F) Dimensions (mm) P1 B F fd fD0 W W1 H0 P2 H1 fD A H2 Dimensions (mm) P P 30.01.0 H2 P0 15.00.3 0D0 P1 7.51.0 P2 3.750.50 4.00.2 A +1.5 1F 9.0 -1.0 2F 12.0 -1.0 +1.5 F 7.50.8 3F 15.01.5 W 18.00.5 1F 14 max. W1 9.00.5 2F 17 max. H0 16.0 - 0 3F 21 max. 1F 2.80.5 2F 4.01.0 H1 P0 1.00.3 B +1.0 +1.0 1F 7.0 - 0 2F 8.0 - 0 3F 9.0 - 0 +1.0 0D +1.0 3F 0d 5.51.0 0.800.05 Radial Tape Package Specifications Type ERG(X)12SWE ERG(X) 1SWE ERG(X) 1FSE ERG(X) 2SWE b ERG(X) 2FSE Marking a ERG(X) 3FSE c Dimensions (mm) Standard Quantity (pcs./box) a b c 46 145 325 2000 49 150 317 1000 49 150 317 500 49 190 315 500 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Aug. 2012 - 52 -