EMI Absorber
AB-5000S
Data Sheet
Product Description
3Μ™ EMI Absorber A B-5000S Series consists of
flexible, soft metal flakes filler in polymer resin
with acrylic pressure sensitive adhesive. It is
supplied on a removable liner for easy handling
and die-cutting
3Μ EMI Absorber AB-5000S is available in
sheets.
Applications
3Μ EMI Absorber AB-5000S is typically used for
applications requiring electromagnetic absorbing
performance. It is designed to suppress radiated
noise from electrical devices for broadband radio
frequency ran g e .
Common uses include mobile phone (SAR
reduction), computer, digital still camera, RF
block, military equipments for radar avoidance
and stealth performance.
Attenuation and Power Loss
Many factors determine the true attenuation of an
electromagnetic absorbing material, including
shape and thickness, intimacy of substrate contact,
smoothness of application surface, strength and
frequency of the EMI signal, etc. However, using
standard tests and fixtures, it is possible to
determine a value for the signal attenuation.
3Μ EMI Absorber AB-5000S typical attenuation
range is dependent on thickness.
3M EMI Absorber AB 5000S Series – Typical Properties
Properties Typical Value
Type of Backing Polymer resin with metal flake filler
Type of Adhesive Acrylic non-conductive pressure sensitive ad hesive (PSA)
Product Num ber AB5010S AB5020S AB5030S AB5050S AB5100S
Thickness 1 0.10mm 0.20mm 0.30mm 0.50mm
1.00mm
Standard packa gin g 210mm x 297mm
Temperature range -25 ~ 85℃
Surface resistivity 2 1x10 6Ω(min)
Thermal conductivity 0.7 W/mK
Tensile strength 3 6.0MPa(min)
Attenuation (S11 Reflection
Loss) and Power Loss4 Refer to attached chart
1. This value does not contain a double side adhesive tape thickness. Typical adhesive tape thickness is 50㎛ (AB5010S contains 30 adhesive)
2. Test method : ASTM D257
3. Test method : JIS K 6251
4. Attenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by 50Ωmicrostrip line.
Reflection
Power Loss
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to
be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained
on your purchase order shall have no force or effe ct unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a
period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is
defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any
indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal
theory asserted.
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-900 0
800-676-8381 Fax 800-828-9329 Litho in USA
www.3M.com/emc © 3M 2007 All rights reserved.
78-8131-7717-3 B
