https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page1/9
Panel feed-through terminal block-HDFK 4-0707086
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Panel feed-through terminal block, connection method: Screw connection with tension sleeve, Screw connection
with tension sleeve, number of positions: 1, load current: 32 A, cross section: 0.2 mm²-6 mm², connection
direction of the conductor to plug-in direction: 0 °, width: 8.1 mm, color: gray
The figure shows a 7-position
version
Your advantages
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
Tool-free snap-in principle enables easy mounting on the device panel
Automatic panel thickness compensation enables universal use
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 50 pc
GTIN
GTIN 4017918003869
Weight per Piece (excluding packing) 8.788 g
Custom tariff number 85369010
Country of origin Greece
Technical data
Item properties
Brief article description Panel feed-through terminal block
Range of articles HDFK 4
Pitch 8.1 mm
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page2/9
Panel feed-through terminal block-HDFK 4-0707086
Technical data
Item properties
Number of positions 1
Number of connections 2
Number of potentials 1
Electrical parameters
Nominal current 32 A
Nom. voltage 400 V (With metal panels of 1 mm ... 2.5 mm)
Maximum load current 41 A (with 6 mm² conductor cross section)
Rated voltage (III/3) 400 V
Rated surge voltage (III/3) 6 kV
Connection capacity, external
Connection method Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction 0 °
Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm²
2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve 0.25 mm² ... 1.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve 0.5 mm² ... 2.5 mm²
Internal cylindrical gage A4
Stripping length 9 mm
Torque 0.6 Nm ... 0.8 Nm
Connection capacity, internal
Connection method Screw connection with tension sleeve
Connection direction of the conductor to plug-in direction 0 °
Conductor cross section solid 0.2 mm² ... 6 mm²
Conductor cross section flexible 0.2 mm² ... 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm²
2 conductors with same cross section, solid 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible 0.2 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic
sleeve 0.25 mm² ... 1.5 mm²
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page3/9
Panel feed-through terminal block-HDFK 4-0707086
Technical data
Connection capacity, internal
2 conductors with the same cross section, flexible, with TWIN ferrule with
plastic sleeve 0.5 mm² ... 2.5 mm²
Internal cylindrical gage A4
Stripping length 9 mm
Torque 0.6 Nm ... 0.8 Nm
Material data - contact
Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/
JEDEC JESD 201
Contact material Cu alloy
Surface characteristics tin-plated
Material data - housing
Housing color gray (7042)
Insulating material PA
Insulating material group I
CTI according to IEC 60112 600
Flammability rating according to UL 94 V0
Glow wire flammability index GWFI according to EN60695-2-12 850
Glow wire ignition temperature GWIT according to EN60695-2-13 775
Temperature for the ball pressure test according to EN60695-10-2 125 °C
Dimensions for the product
Caption Schematische Abbildung - weitere Details siehe Produktfamilienzeichnung
im Download Center
Width [ w ] 8.1 mm
Height [ h ] 21 mm
Pitch 8.1 mm
Dimensions for mounting cutout
Plate thickness 1 mm ... 4 mm
Packaging information
Type of packaging packed in cardboard
Pieces per package 50
Denomination packing units Pcs.
Electrical tests
Rated current 32 A
Conductor cross section 4 mm²
Air clearances and creepage distances
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page4/9
Panel feed-through terminal block-HDFK 4-0707086
Technical data
Air clearances and creepage distances
Clearances and creepage distances Metal wall 1.0mm...2.5mm IEC60947-7-1:2002-07
Application Metal wall 1.0mm...2.5mm
Specification IEC60947-7-1:2002-07
Minimum clearance - inhomogeneous field (III/3) 5.5 mm
Minimum creepage distance value (III/3) 5.5 mm
Standards and Regulations
Connection in acc. with standard CSA
IEC60947-7-1
IEC/ EN
Flammability rating according to UL 94 V0
Safety note
• Only electrically qualified personnel may install and operate the product.
To recognize and prevent danger, the qualified personnel must be familiar
with the basics of electrical engineering.
• Observe the technical data provided here and refer to the documents
listed under “Downloads”. The download area contains important
information, such as installation notes, technical drawings, and 3D data.
• The cable entry funnel is not safe to touch. Never connect or disconnect
the terminal when it is energized. Take appropriate steps to ensure touch
protection.
There is no electrical contact to the housing. Ensure protective grounding
is established for green-yellow color versions.
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
Dimensional drawing
21
20 15
1-4
Dimensional drawing
5,4 8,1
2,8
11,5
6,5
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page5/9
Panel feed-through terminal block-HDFK 4-0707086
Classifications
eCl@ss
eCl@ss 10.0.1 27141134
eCl@ss 11.0 27141134
eCl@ss 4.0 27141100
eCl@ss 4.1 27141100
eCl@ss 5.0 27141100
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141134
eCl@ss 9.0 27141134
ETIM
ETIM 2.0 EC001283
ETIM 3.0 EC001283
ETIM 4.0 EC001283
ETIM 6.0 EC001283
ETIM 7.0 EC001283
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Approvals
Approvals
Approvals
CSA / KEMA-KEUR / IECEE CB Scheme / EAC / cULus Recognized
Ex Approvals
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page6/9
Panel feed-through terminal block-HDFK 4-0707086
Approvals
Approval details
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
Nominal voltage UN 300 V
Nominal current IN 30 A
mm²/AWG/kcmil 22-10
KEMA-KEUR http://www.dekra-certification.com 2169260.01
Nominal voltage UN 250 V
Nominal current IN 32 A
mm²/AWG/kcmil 4
IECEE CB Scheme http://www.iecee.org/ NL-29947
Nominal voltage UN 250 V
Nominal current IN 32 A
mm²/AWG/kcmil 4
EAC B.01687
cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19870911
B D
Nominal voltage UN 300 V 300 V
Nominal current IN 30 A 10 A
mm²/AWG/kcmil 30-10 30-10
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page7/9
Panel feed-through terminal block-HDFK 4-0707086
Accessories
Accessories
Insertion bridge
Insertion bridge-EBS 2- 8-3118151
Insertion bridge, pitch: 8 mm, number of positions: 2, color: gray
Insertion bridge-EBS 3- 8-3118148
Insertion bridge, pitch: 8 mm, number of positions: 3, color: gray
Insertion bridge-EBS 10- 8-3118135
Insertion bridge, pitch: 8 mm, number of positions: 10, color: gray
Screwdriver tools
Screwdriver-SZS 0,6X3,5-1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm,
2-component grip, with non-slip grip
Terminal marking
https://www.phoenixcontact.com/us/products/0707086
04/05/2021Page8/9
Panel feed-through terminal block-HDFK 4-0707086
Accessories
Zack marker strip-ZB 6:UNBEDRUCKT-1051003
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels:
10
Marker for terminal blocks-UC-TM 6-0818085
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80
Zack Marker strip, flat-ZBF 6:UNBEDRUCKT-0808710
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into flat marker groove, for terminal block width: 6.2 mm, lettering field size: 5.15 x 6.15 mm, Number of individual
labels: 10
Marker for terminal blocks-TMT 6 R-0816498
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK
S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width:
6.2 mm, lettering field size: 6.35 x 6.15 mm, Number of individual labels: 16000
Marker for terminal blocks-TMT (EX9,5)R-0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: snap
into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering field size: 9.5 x
50000 mm, Number of individual labels: 1
